- Home
- Equipment
Refine by
Etg Environmental Equipment & Supplies
22 equipment items found
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The instrument uses radar technology to measure the hydrometric level of the waterway, taking a measurement of the distance of the water surface from the sensor case and then subtracting the value found from the hydrometric zero value. ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The air humidity sensor consists of a membrane of hygroscopic material that forms the dielectric of a capacitor so that the water molecules in the air are absorbed by the dielectric, thus causing a change in the capacitor’s capacity, due to the humidity, to which a change in the oscillation frequency of an electrical circuit connected to a sensor corresponds, which in turn transforms it ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
What is and what is used for: The pressure exercised by a liquid is proportionate to its height, and in this way it is possible to determine its level by measuring the pressure. The resistance and compatibility with the fluids of the various components, type of material the instrument case, seals and electrical cable are made of are essential in this ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The PPS-L sensor was introduced in ETG’s proposals to solve problems relating to their PPS mechanical cousins Like in every system subjected to mechanical friction and wear and tear, the wire level measurement systems are subjected to deterioration. More specifically, this deterioration is tied to the steel wire and to the recovery mechanism, which therefore require periodic maintenance. ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
ETG 6500 SYN series of gas analyzers by ETG are the ideal solution for Syngas measurement applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG 6500 SYN non-dispersive infrared (NDIR) gas analyzers measure multiple gases in the instrument in special wavelenght regions, interferences free from ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The axis of the weather vane moves on a set of ball bearings and is equipped with a magnet on one of the two ends. The relative angle of the weather vane is scanned by a contactless angular magnet sensor that returns a voltage depending on the relative position between magnet and sensor. From here a microcontroller calculates the direction of the wind, linearising the ratio between angle and ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
This avant-grade monitoring system has the ability to detect even quicker NH3 molecules at the most accurate range. ETG 6903 TDL Rock (NH3) continous status monitoring, automatic calibration and remote controlling option (by ethernet & USB) allows the user to exploit the maximum capacity of the instrument at the minimum effort and mantenance. ETG 6903 TDL Rock (NH3) is expandable in a ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The sensor measures the height of the snow by taking a measurement of the distance of the snow from the sensor case and then subtracts the value found from the zero value place at the level of the base on which the snow deposits. The sensor, managed by a microprocessor control unit, supplies a digital signal lasting a time proportionate to the distance measured in output and is immediately ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
What is and what is used for Designed to meet all real-time monitoring requirements, it was built to interface with all existing weather instruments. Equipped with built-in GSM/GPRS card and memory card, it downloads data locally or sends them to an IP address for downloading via ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
The ETG MCA 100 Bio series of gas analyzers by ETG are the ideal solution for Biogas/Biomethane updgrading measurement because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG MCA 100 Bio nondispersive infrared (NDIR) gas analyzers measure multiple gases in an instrument with a single optical path platform. ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
For NH3 - HCl - XH4 - CO2 - H2O monitoring This avant-grade monitoring system has the ability to detect even quicker molecules at the most accurate range. ETG 6900 TDL continous status monitoring, automatic calibration and remote controlling option (by ethernet & USB) allows the user to exploit the maximum capacity of the instrument at the minimum effort and mantenance. ETG 6900 TDL is ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
The ETG Clamp On is a device that measures the water flow rate in a pipeline based on the principle of the difference of transit time of an ultrasonic pulse. An acoustic (ultrasonic) signal is transmitted in both directions by one sensor to the other. The propagation velocity of the acoustic waves in the flow direction is greater than that in the opposite direction and, as a result, a difference ...
Manufactured by:ETG S.r.l based inScandicci (FI), ITALY
WQ0X is ready for the assembly of up to 12 sensors, used to measure quality parameters in surface and underground ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
The ETG 9500 is the most flexible and cost-effective solution for FTIR analysis. We have developed a spectrometer with the best materials, resulting in a high signal, low noise and long lifetime of its components. Its simple interface and practical functions make it the number one ally in industrial ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
The ETG 6500 BIO LNG gas analyzer is developed with the aim of providing a simple and reliable solution for the liquefying processes. Thanks to the photoacoustic technology, it is capable of providing stable measurement results, which makes it ideal for a continuous monitoring of the process. ETG 6500 BIO LNG, thanks to its design, which let the gases flow separately from the sensors, requires ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
The biggest problem of Syngas analysis is the presence of "tars", which makes the sample gas extremely difficult to handle. Tar aerosols and deposits lead to frequent maintenance and repair and, if ignored, they can damage the sensors permanently, or make them less reliable. This can result in lower efficiency in process monitoring, thus to a potential economic loss for the end user. In gas ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
ETG MCA 100 SYN P series of gas analyzers by ETG are the ideal solution for Syngas measurement applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG MCA 100 SYN P non-dispersive infrared (NDIR) gas analyzers measure multiple gases in the instrument in special wavelenght regions, interferences ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
PAS technology is perfect for many different industries. From identifying toxic gases to the monitoring of organic compounds in production plants, laboratories, and hospitals.Thanks to its high resolution, the ETG QE-PAS unlocks its full potential in process control such as fermentation monitoring or pure gas ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
Regarding the problem of monitoring diffuse emissions, or of the leaking in gas pipelines, ETG Risorse in collaboration with NIMBUS has developed a drone for GHG diffusing emission monitoring, simplifying this type of analysis for the end customer. This system, equipped with a sensor with TDLAS (tunable diode laser absorption spectroscopy) technology, is able to detect methane concentrations ...
Manufactured by:ETG Risorse e Tecnologia S.r.l. based inChivasso (TO), ITALY
The MCA 100 Bio series of gas analyzers by ETG are the ideal solution for Biogas measurement and industrial combustion applications, because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG MCA 100 non-dispersive infrared (NDIR) sensor can measure multiple gases in a single instrument, using only one optical ...