- Home
- Equipment
Refine by
Hermes Environmental Equipment & Supplies
14 equipment items found
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
The ERGELIT tape – a safe protection for steel, cast iron, cement and plastic pipes! No more leaks below ground. Countless pipework systems made of steel, cast iron, cement or synthetic materials run through the ground beneath our feet. They ensure water supply and waste disposal for residential and commercial properties. It is therefore in all our interests that these pipes should be ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
The CAMSTOPPER is the world's fastest and safest mechanical pipeline plug to install and retrieve. The pipeline plug is designed specially for drain and sewer applications (typical operating pressure from 0.3 up to 0.5 ...
Manufactured by:ecoSUB Robotics Limited based inBracebridge, ​Camberley, UNITED KINGDOM
The HERMES C3 (Command Control & Communications) System is designed to enable ecoSUB users to connect with their vehicles in any location in the World, simply and efficiently, using a variety of communications channels including Wi-Fi, Iridium, 3G/4G, RS-232 and Acoustic. HERMES C3 is equipped with GPS for Geolocation anywhere and can act as a Long Base Line (LBL) surface node when required, ...
Manufactured by:2B Technologies based inBoulder, COLORADO (USA)
2B Tech has taken the next step in miniaturization of UV-based mercury monitors by developing the HERMES Personal Mercury Monitor or "PMM." The HERMES has dimensions of 4 x 3 x 1.5 inches and weighs only 0.75 lb (340 g). It has a built in GPS so that mercury measurements may be logged continuously along with geographic location. By folding the optical path in the shape of a "U," it was possible ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Masonry mortars are stiff to plastic in consistency and are used when laying clinker bricks in sewers and shafts. Berms can be installed using bricklaying mortar. The grain-size is < 4mm. The job of masonry mortar is to join blocks and stone firmly and permanently. Essentially, it transfers stresses and evens out any unevenness between two elements in the construction. The brickwork must be ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
ERGELIT grouting mortars are shrink-free and self-levelling, with excellent compression strength, adhesive strength and tensile strength. Different sizes of particles and the way they are combined based on ERGELIT’s many years of experience guarantee you an economical, powerful and permanent solution to your ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Injection mortar has a soft to runny consistency. It is used when repairing lateral connections by robot, for later sealing of leaking sections, especially in water conservancy areas, injecting cracks, and stabilising the soil in new-build situations. Even quite large leaks can be sealed off with injection mortar, even in the presence of flowing groundwater. Thanks to cement injection technology, ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Coating mortars are plastic to soft plastic in consistency. They are used for subsequent recoating of concrete, brickwork or reinforced concrete sections in all situations. The grain-size varies from 0.5mm to 4mm. Coating mortars are applied by hand or mechanically. They are also used for restoring or improving static strength or abrasive strength, raising corrosion resistance and creating a ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Tile laying mortars have a soft plastic consistency. They are used for laying tiles as well as both small and large ceramic or fired-basalt plates with cross studs or ribbing on the back. These are used in sewers in all situations. Once they have set hard, tile-laying mortars are suitable in situations where there is waterlogging from the outside. The plates are usually fixed using a buttering ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Repair mortar has a stiff plastic to soft plastic consistency. The grain-size is normally <4.0mm. It is used for partial renovation, repair and reprofiling of damaged sections of concrete or brickwork. New elements can be attached or skimmed over with this mortar. Its uses overlap those of pointing mortar and coating ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Introducing the "Titan-Alu" manhole-cover opener, the indispensable tool for everyone working with manhole-covers, oil separator-, gas -, water- or cable pit ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Manhole shaft mortar is a bricklaying mortar or a liquid mortar with particular specifications regarding strength. It is also used when regulating manhole ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
Pointing mortars are stiff to malleable in consistency. The grain-size is < 2mm. Pointing mortar is used to grout joints in brickwork and to grout joints between two sections of pipe, as well as replacing corroded or washed out grouting. Joints between manhole shaft rings are sealed with 2 to 4 cm depth of jointing mortar. Cavities, small defects affecting only a limited area, and cracks can ...
Manufactured by:Hermes Technologie GmbH & Co KG based inSchwerte, GERMANY
M-Coating is a innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. All the necessary equipment is contained within a specially designed, rugged, covered trailer. ...