- Home
- Equipment
Refine by
Lmk Environmental Equipment & Supplies
29 equipment items found
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The screw-in transmitter LMK 331 has been especially designed for level and process measurement and is suitable for pressure measurement of liquids, oils and gases. Usage in more viscous or polluted media is possible because of the semi-flush pressure sensor. For the usage in aggressive media we recommended the version with PVDF pressure port. Additional features like e.g. an intrinsically safe ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The hydrostatic probe LMK 487 has been developed for measuring levels in various tankm applications for shipbuilding and offshore. In comparison to the hydrostatic probe LMK 458 the external diameter amounts to only 22 mm by which the installation in 1" pipes can be carried out easily. Beside the housing materials stainless steel and titanium, different elastomer materials are available by which ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The stainless steel probe LMK 387H was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outer diameter is only 22 mm, whereby the installation or retrofitting can be easily carried out in 1 "pipes or in confined installation ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The stainless steel probe LMK 382H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O - accuracy: 0.1 % FSO - diameter 39.5 mm - HART®-communication (setting of offset, span ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The LMK 806 with ceramic sensor and diameter from only 21 mm has been especially designed for the continuous level measurement at confined space conditions. Permissible media are waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The stainless steel probe LMK 387 was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the front-flush ceramic diaphragm faciliates an easy disassembly and cleaning of the probe in case of service. Compared to the level probe LMK 382 the outside-diameter is only 22 mm, which allows an easy installation and backfitting in 1" tubes or ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The plastic submersible probe LMK 807 is designed for continous level measurement for waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in order to achieve maximum media compatibility. ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
BD|SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The LMK 458H has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 85 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458H is a capacitive ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O - ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O - accuracy: 0.35 % (opt. 0.25 %) FSO - diameter 39.5 mm - especially for sewage, viscous ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: - nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O - accuracy: 0.5 % ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The level transmitter LMK 307 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the customer-specific operating conditions. Features: - nominal pressure: 0 ... 4 mH2O up to 0 ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The LMK 458 has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 125 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458 is a capacitive ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The screw-in transmitter LMK 351 has been designed for measuring small system pressure and level measurement in container. The LMK 351 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI2O3 99.9 % is available. An ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
The Lateral Launch Tank is designed for LMK's lining through a clean out process. This tank can install CIPP liners from only one access point by inversion. Liners can be directed upstream or downstream and start and stop anywhere in the ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
LMK partnered with Alkota a couple of years ago to develop a portable steamer in response to a growing need to install and cure LMK’s Performance Liner quickly and effectively. This new equipment is used to steam cure lateral liners in as fast as 30 minutes, cutting curing time by 75% when compared to an ambient cure system. This advance in equipment will substantially enhance production ...