- Home
- Equipment
Refine by
Mount Sopris Environmental Equipment & Supplies
21 equipment items found
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-DEV Borehole Deviation probe measures the direction relative to magnetic north, inclination and trajectory of the borehole. Measurements are based on the “Applied Physics Systems” 544 orientation sensor containing both a 3-axis fluxgate magnetometer and a 3-axis accelerometer. Deviation parameters are calculated in real time and displayed as continuous logs during the ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-NEU neutron probe utilizes a He-3 thermal neutron detector. It measures Neutron porosity in counts per second, which can be directly related to the porosity of the formation. The probe has been carefully designed to maximize the detector sensitivity so that good results can be achieved with source strength of only 1 Curie. The source is carried in a specially designed shield and the ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-FWS Full Waveform Sonic tool is used extensively in the groundwater, mining, and geotechnical industries. Sonic logs are widely employed, often in combination with other logs, to provide porosity, permeability, and geo-mechanical properties. This probe is ideal for cased-hole and open hole applications, such as fracture identification and cement bond ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-ABI-2G is the latest generation of acoustic televiewers based on 20 years of experience and market leadership. The new system consists of a completely redesigned acoustic sensor and new electronics. The acoustic borehole imager records a 360°unwrapped and 3D image of the borehole wall. The tool emits an ultrasonic beam towards the formation and records the amplitude and the travel ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The Mount Sopris Intelligent Winch Assembly (IWA) is smarter, stronger, safer, and more user-friendly, while holding more cable than any of its predecessors. With a powerful 6 HP servo motor and a 2,500-meter (8,200-feet) wireline capacity, this winch was designed to deliver more. Featuring an intuitive touchscreen user interface, all winch settings and system diagnostics are easily monitored and ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The 19GR Nano Gamma is the slimmest downhole gamma probe in existence today. At only 19.05 mm (0.75 inches) in diameter, it can be used inside Geoprobe push tubes to collect lithological information in soils or other hard to reach zones. It is operated as a standalone pulse probe on the Matrix acquisition system. The natural gamma probe measures the amount of gamma radiation occurring naturally ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-IND Dual Focused Induction probe provides two simultaneous conductivity logs, corresponding to “Medium” and “Deep” radii of investigation into the borehole. The two depths of penetration are useful in porous, permeable formations where displacement of formation fluids by drilling mud creates an invasion zone with different electrical properties. High stability and ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-HM borehole magnetic susceptibility tool is typically used in mining, geotechnical, and lithology applications. All electronic circuitry resides in a high strength non-magnetic enclosure. The operating frequency is chosen to be sufficiently low to avoid interference from rock conductivities and the circuitry is temperature compensated to minimize thermally induced drift. The QL40-HM is ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The hardware incorporates the latest electronic components with embedded systems controlled via the specially developed LoggerSuite windows interface program. The system design philosophy is unique in two respects, firstly it is totally software controlled, and secondly it has been built to accommodate multi-vendor tool types. As standard the OPAL operates all tools using the ALT/MSI QuickLink ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-OBI-2G and OBI40GR-2G are the new generation of Optical Borehole Imagers. The new televiewer comprises a completely redesigned optical assembly with new electronics. It implements a high resolution CMOS digital image sensor combined with a fisheye lens. The tool produces an extraordinarily clear, sharp, 360° continuous- upwrapped digital picture of the borehole wall, either in air ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The MX Winch is a portable logging winch capable of positioning a geophysical probe or other downhole logging tools in a borehole. The MX winch product line is comprised of the MXA, MXB and MXC winches. The system is equipped with a slip ring, cable level wind, depth measure head, mechanical brake, and connections through which surface data logger can communicate with the downhole ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-CAL Caliper probe records a single continuous borehole diameter log by means of three mechanically coupled arms in contact with the borehole wall. The 3 arm caliper measurement is a useful first log to determine the borehole condition before running other well logging ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-FTC, QL40-FTC-I, and 40FTC probes provide borehole temperature and fluid conductivity measurements. The standard temperature log, based on a thermister, is designed to provide a measure of the ambient geothermal gradient and is helpful to detect anomalies caused by events such as fluid flow into the borehole. The borehole fluid conductivity is directly proportional to the concentration ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-OCEAN Idronaut Ocean Seven 303 probe combines a multi-parameter sensing unit manufactured by Idronaut srl, Brugherio, ITALY. This water quality probe is specifically designed for groundwater and environmental investigations. It uses reliable, accurate and drift-free high quality sensors and records a continuous profile of the borehole fluid properties. In the standard configuration, the ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-ELOG digital probe measures 8, 16, 32 and 64 inch normal resistivity, single point resistance (SPR) and spontaneous potential (SP) simultaneously. Users can log resistivity profiles with different depths of investigation and gain information about permeability, porosity, water quality and geological formation properties. Four resistivity measurements are recorded compared to two offered ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-SFM Spinner Flowmeter probe measures impeller rotation caused by groundwater flow in the borehole. It uses a magnetically coupled pick-up which drives a low friction, high resolution encoder located inside the lower pressure housing. The encoder produces 256 pulses per shaft rotation. It has quadrature sensing electronics that instantaneously detect flow direction changes. The QL40-SFM ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
Mount Sopris WNA and WFA Truck-Mounted Winches are rugged, field-tested logging hoists capable of positioning a geophysical probe or other tool in a borehole. They are designed to be mounted to a truck and can haul equipment loads up to 272 kg (600 lbs) at rates between 0 and 90 m/min (0 to 300 ft/min). These winches are optimal for boreholes between 1000 and 1800 meters (3280 ft to 5900 ft) in ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The “Mini” winch is a logging hoist, capable of positioning a geophysical probe or other tools in a borehole. The system is equipped with slip ring and connections through which surface instrumentation can communicate with the probe. A precision measuring wheel and rotary encoder are also included to allow the amount of cable played out to be tracked. The cable is wrapped on the drum ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-GR probe measures the amount of gamma radiation occurring naturally within the formations crossed by a borehole. Gamma rays are produced mainly by isotopes of potassium, thorium, and uranium. The gamma log is widely used in the groundwater and mining industries to identify lithology and perform clay content analyses. The tool is supplied as a stackable sub of the Quick Link (QL) product ...
Manufactured by:Mount Sopris Instruments based inDenver, COLORADO (USA)
The QL40-DEN Compensated Density & Caliper probe is a versatile wireline tool that can be used in a wide variety of logging applications. Measurements include SSD (short-spaced density), LSD (long-spaced density), Compensated density (dual density), and Caliper. The tool section is designed for operation in 2 to 12 inch (5 – 30 cm) boreholes. This dual detector, high resolution density ...