- Home
- Equipment
Refine by
Ndt Environmental Equipment & Supplies
21 equipment items found
Manufactured by:NDT Seals, Inc. based inHouston, TEXAS (USA)
Size: 1.5” (38 mm) diameter. Includes: Cap, handle, lanyard and locking ring. Available Types: Aluminum/EPDM (#1AG3): $10.73 each. Aluminum/Silicone (#1AG3S): $12.73 each. (304) Stainless Steel/EPDM (#1SG3): $12.73 each. (304) Stainless Steel/Silicone (#1SG3S): $14.73 each. Technical Data Sheet: click here to download. Hole saws available for installation. Contact NDT Seals for more ...
Manufactured by:NDT Seals, Inc. based inHouston, TEXAS (USA)
Size: 2.5” (64 mm) diameter. Includes: Cap, handle, lanyard and locking ring. Available Types: Aluminum/EPDM (#2AG3): $11.44 each. Aluminum/Silicone (#2AG3S): $13.44 each. (304) Stainless Steel/EPDM (#2SG3): $13.44 each. (304) Stainless Steel/Silicone (#2SG3S): $15.44 each. Technical Data Sheet: click here to download. Hole saws available for installation. Contact NDT Seals for more ...
Manufactured by:NDT Seals, Inc. based inHouston, TEXAS (USA)
Measurements: 3.0”w x 3.875" h, with 1.25" diameter opening. Wording: "DO NOT REMOVE, NDT INSPECTION POINT". Color: Bright Orange. Tab-U-Seal: Included. Pricing: Per roll (250 labels each). 1-9 Rolls: $869.00 each. 10-19 Rolls: $783.75 each. 20 Rolls: $720.50 ...
Manufactured by:NDT Seals, Inc. based inHouston, TEXAS (USA)
Size: 3.0” (76 mm) diameter. Includes: Cap, handle, lanyard and locking ring. Available Types: Aluminum/EPDM (#3AG3): $12.55 each. Aluminum/Silicone (#3AG3S): $14.55 each. (304) Stainless Steel/EPDM (#3SG3): $14.55 each. (304) Stainless Steel/Silicone (#3SG3S): $16.55 ...
Manufactured by:NDT Global based inHouston, TEXAS (USA)
A valve that isolates a section of the subsea pipeline or riser in the event of an emergency, maintenance, or repair activities. It allows operators to stop the flow of hydrocarbons in case of a pipeline rupture, equipment malfunction, or other unforeseen ...
Manufactured by:NDT Global based inHouston, TEXAS (USA)
Inertial Measurement Units (IMU) are critical in situations where traditional GPS detection methods are unavailable, such as pipelines located beneath a seabed, requiring precise accuracy. These units measure and report specific force, angular rate, and sometimes orientation of objects or vehicles by combining multiple sensors. IMUs capture tool behavior through impressive data collection rates ...
Manufactured by:Advanced NDT Limited based inHallow, UNITED KINGDOM
The PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on ...
Manufactured by:Splitter NDT Inc. based inSt. Catharines, ONTARIO (CANADA)
Traditionally used to determine material thickness, non-conductive coating thickness, conductivity and plating measurement, and cracks. Standard features: 45 degree angle, Shaft Diameter Options of; 0.072", 0.093" or 0.125”. Delrin handle, 50-500 kHz, Microdot connector or Triax connector. Other options include: higher frequency, length, connector, drop length, bent shaft angle. ...
Manufactured by:Splitter NDT Inc. based inSt. Catharines, ONTARIO (CANADA)
Traditionally used to determine material thickness, non-conductive coating thickness, conductivity and plating measurement, and cracks. Standard features: 90 degree angle, Shaft diameter options of; 0.072", 0.093" or 0.125”. Delrin handle, 50-500 kHz, Microdot connector or Triax connector. Other options include: higher frequency, length, connector, drop length, bent shaft angle. ...
Manufactured by:Splitter NDT Inc. based inSt. Catharines, ONTARIO (CANADA)
Traditionally used to determine material thickness, non-conductive coating thickness, conductivity and plating measurement, and cracks. Standard features: Shaft Diameter Options of; 0.072", 0.093" or 0.125”. Delrin handle, 50-500 kHz, Microdot connector or Triax connector. Other options include: higher frequency, length, connector, drop length, bent shaft angle. ...
Manufactured by:Sonotron NDT based inRehovot, ISRAEL
Superior Performance Portable Smart All-In-One Dual Channel Ultrasonic Flaw Detector and Recorder with A-, B-, C-, CB-Scan, TOFD, and Strip Chart ...
Manufactured by:Sonotron NDT based inRehovot, ISRAEL
Superior Performance Portable Smart All-In-One Ultrasonic Flaw Detector and Recorder with A-, B-, C-, CB-Scan, and TOFD ...
Manufactured by:Sonotron NDT based inRehovot, ISRAEL
Portable Smart All-in-One 8-Channel Ultrasonic Flaw Detector and Recorder; Simply connect all necessary probes and position encoder and fit all stuff into the ...
Manufactured by:Advanced NDT Limited based inHallow, UNITED KINGDOM
The Dakota ZX-1 & ZX-2 are basic fixed velocity ultrasonic thickness gauges that require no special training to operate. The Dakota ZX-1 & ZX-2 basic fixed velocity ultrasonic thickness gauges. Calibration is done by simply scrolling to a known material velocity, or selecting a common material from a list of material types in the ZX-2. The gauges were designed and built to withstand the ...
Manufactured by:Advanced NDT Limited based inHallow, UNITED KINGDOM
The Nova TG-110-DL is our most popular Digital Ultrasonic Thickness Gauge. With a great ultrasonic performance and all the features that you may require, including a Through Paint option. A range of probes are available to cater for difficult materials, high temperatures etc. A simple hand-held, robust, general purpose Ultrasonic Thickness Tester ideal for many ...
Manufactured by:NDT Seals, Inc. based inHouston, TEXAS (USA)
Measurements: 3.0”w x 2.0" h. Wording: "DO NOT REMOVE, NDT INSPECTION POINT". Color: Bright Orange. Tab-U-Seal: Included. Pricing: Per roll (250 labels each). 1-9 Rolls: $558.25 each. 10-19 Rolls: $500.50 each. 20 Rolls: $448.25 ...
Manufactured by:Advanced NDT Limited based inHallow, UNITED KINGDOM
The PosiTest is a Magnetic Pull-Off Thickness Gauge For the Non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanising, metalising, plating, etc.) on ...
Manufactured by:Advanced NDT Limited based inHallow, UNITED KINGDOM
The SIUI CTS-30A & CTS-30B is a small, lightweight Ultrasonic Thickness Gauge which offers exceptional value for money. Ideal for basic testing applications. The SIUI CTS-30A / CTS-30B Ultrasonic Thickness Gauge, adopts micro-processor technology and advanced manufacture process design, can do measurement of thickness and acoustic velocity on metal and many materials based on ultrasound ...
Manufactured by:Sonotron NDT based inRehovot, ISRAEL
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector and Recorder with 2 Additional Channels for Conventional UT / TOFD. Designed and built under the drive for improved detection, productivity, and reducing of inspection cost ISONIC 3510 uniquelly resolves the well-known nowadays challenges faced by NDT and QA management such as increasing of ...
Manufactured by:Sonotron NDT based inRehovot, ISRAEL
ISONIC utPod LF is the modified version of ISONIC utPod adopted for the low frequency ultrasound applications. It is characterized by the appropriately modified frequency band of the receiver and the limits for manipulating duration of the initial pulse – refer to Technical ...