- Home
- Equipment
Refine by
Perma Environmental Equipment & Supplies
31 equipment items found
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Innerseal™ by Perma-Liner ™ is the trenchless cured-in-place pipe system technology that has been used in collection systems throughout North America to repair the connection from the mainline while simultaneously renewing the lateral. InnerSeal™ the Sewer Repair System by Perma-Liner™ Industries is installed without the need for digging and replacing with new pipe. With ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Perma-liner’s patented pending technology comprises of polyester non-woven fabric tube coated with super flexible TPU coating. This coating helps in smooth and easy installation due to its versatile thermoplastic characteristics that provides very high elasticity. Further elasticity helps in easy installation in smaller diameters at lower pressures and ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Speed Up Cure Time on Perma-Lateral Inversion and Pull In ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Protect the manhole with our patented Made In The U.S.A manhole cover. HIGHLY VISIBLE SAFETY ORANGE= INDUSTRY ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Perma-Liner™ Sectional Point Repair Cured-In-Place-Pipe (CIPP) Rehabilitation System. The Perma-Liner™ Sectional Lining System is designed for 6” – 60” Diameter Pipelines. The materials are pulled into place through existing manholes and are ambient cured in 3 hours or heat cured in as little as 1 ½ hours. PLI Sectional Point Repair Materials can be installed ...
Manufactured by:Hyspan Precision Products, Inc. based inChula Vista, CALIFORNIA (USA)
Series 6500 Packed Expansion Joints are designed for installations where the principal movement is axial. Standard single and dual designs are available 2″ through 24″ diameter with travels of 4″, 8″ and 12″ compression for single designs, and 8″, 16″ and 24″ compression for dual designs. Service conditions are 150 and 300 psig to 500°F. Welded ...
Manufactured by:perma-tec GmbH & Co. KG based inEuerdorf, GERMANY
perma PRO LINE is a special multi-point lubrication system for linear guides. Each outlet's lubricant discharge can be adapted to manufacturer specifications. The PRO LC is available in two sizes (filled with 250 cm³ or 500 cm³ of grease) and supplies lubrication points with lubricant for up to 2 years. The high pressure build-up enables remote mounting with tube extensions of up to 5 m ...
Manufactured by:perma-tec GmbH & Co. KG based inEuerdorf, GERMANY
The automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³). It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C. Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the ...
Manufactured by:perma-tec GmbH & Co. KG based inEuerdorf, GERMANY
perma ULTRA is a fully automatic lubrication system, independent of temperature and counter pressure with a very precise discharge. With two cartridge sizes, pressure build-up to 50 bar and options of weekly and monthly time settings, perma ULTRA is an extremely versatile and capable lubrication ...
Manufactured by:perma-tec GmbH & Co. KG based inEuerdorf, GERMANY
perma NOVA can be used in all application areas from -20 °C to +60 °C. A discharge period from 1 to 12 months can be entered via the setting button on the NOVA Control unit. The control unit then calculates the required quantity of gas for constant and reliable discharge while taking into account the ambient temperature. perma NOVA consists of a reusable control unit, a NOVA LC filled ...
Manufactured by:perma-tec GmbH & Co. KG based inEuerdorf, GERMANY
The user can select LC unit sizes 250 cm³ and 500 cm³. Each perma PRO can be programmed for lubricant discharge in days, weeks or months, up to a maximum dispensing period of 24 months. The MP-6 distributor supplies up to 6 lubrication points directly without pressure loss (max. 25 bar) and enables the use of tube extensions up to a length of 5 m. perma PRO C MP-6 can also be operated ...
Manufactured by:Substrata, LLC based inHenderson, ALABAMA (USA)
Perma-Zyme has the unique ability to increase the strength of the native soil naturally turning the soil into a concrete-like surface. One of the most beneficial things about this is that you can create some substantial bases for road and foundation construction from clay based soils that would otherwise require time intensive measures for proper ...
Manufactured by:Substrata, LLC based inHenderson, ALABAMA (USA)
One of the most expensive steps required in traditional road construction is the importing and exporting of aggregate. During this process, old material must be hauled out and new aggregate must be trucked in. With the application of Perma-Zyme, you eliminate this step completely by utilizing the native soil as the road base. This can knock down your cost by ...
Manufactured by:Tnemec Company, Inc. based inKansas City, MISSOURI (USA)
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H_2_S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration ...
Manufactured by:Perma-Pipe Inc. - a division of MFRI INC. based inNiles, ILLINOIS (USA)
PERMA-BOND™ is the Premier Engineered Series anti-corrosion pipe coating system for the long term and maximum protection against external corrosion of pipes. Consisting of a layer of fusion bonded epoxy (FBE), polymeric adhesive, and high-density polyethylene (HDPE) outer jacket, PERMA-BOND meets the most demanding performance requirements. Including Ultrabond FBE, Ultrabond ARO, Ultrabond ...
Manufactured by:Perma-Pipe Inc. - a division of MFRI INC. based inNiles, ILLINOIS (USA)
PERMA-BOND™ Pro Series is an advanced anti-corrosion pipe coating system consisting of a layer of fusion bonded epoxy (FBE) to protect against external corrosion and a choice of either an abrasion resistant overcoat (ARO) or moisture resistant overcoat (MRO) for use in highly abrasive or wet environments. Including Ultrabond FBE, Ultrabond ARO, Ultrabond 2, Ultrabond 3, Ultrabond TSA, ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
The Perma-Lateral™ System is designed for 2″ – 8″ pipe diameters. The system can be installed through clean-outs or open end pipes. Only one access point is required. The liner can be ambient cured in 3 hours or steam cured in as little as 20 minutes. 2″ to 4″ diameter pipes can be rehabilitated up to 120FT+ in length, while 5″ to 8″ diameter pipes ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Manhole to Manhole Inversion Rehabilitation System. The Perma-Main™ Top Gun™ lining system is designed for 8″ – 24″ Diameter Pipelines. The materials are air inverted through existing manholes and steam cured in as little as 1 ½ hours. The Perma-Main™ Top Gun materials can be installed safely, fast, and efficient. Installations average 300FT to 600FT in ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Perma-Main™ Top Gun™ Cured-In-Place-Pipe (CIPP) Manhole to Manhole Inversion Rehabilitation System. The Perma-Main™ Top Gun™ lining system is designed for 8″ – 24″ Diameter Pipelines. The materials are air inverted through existing manholes and steam cured in as little as 1 ½ hours. The Perma-Main™ Top Gun materials can be installed safely, ...
Manufactured by:Waterline Renewal Technologies. based inOttawa, ILLINOIS (USA)
Speed Up Cure Time on Perma-Lateral Inversion & Pull In Place 2" - 6" ...