- Home
- Equipment
Refine by
Applications
- Gas detection for building ventilation control
- Environmental monitoring solutions for the groundwater sampling
- Environmental monitoring solutions for the oil refineries & petrochemical industry
- Environmental monitoring solutions for the mining sites industry
- Environmental monitoring solutions for the site remediation industry
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
Sampling Environmental Equipment & Supplies
44 equipment items found
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
Manufactured by:Sampling Systems Ltd. based inWarwickshire, UNITED KINGDOM
Our range is both varied and extensive. To ensure you get the correct sampler for your application, please contact Sampling Systems here and we will be happy to discuss your requirements and suggest a solution or send you a full range ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
The list below represents our most common coupon options. Many other sizes, alloys, and options are available. Please contact your Metal Samples sales representative if you do not see what you are looking for. For a list of alloys see Alloys and Alloys By ...
Manufactured by:Sampling Systems Ltd. based inWarwickshire, UNITED KINGDOM
With an extensive range of unit dose powder samplers, we can sample anything from normal free flowing powders to cohesive sticky powders. Our range of Unit Dose Samplers allows accurate samples to be quickly ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
The sampler allows a sampling with a flow rate from 0.2 to 1.2 l/min; it is supplied with a rechargeable battery with a 10 hours autonomy. It is equipped with a volumetric counter for low flow with a thermometer for temperature measurement. EASY GAS is equipped with a big silica gel trap and a protection filter. This solution allows to avoid pump damages coming from aggressive stack gases or ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
The MS4500E is a hand-held, battery-powered, corrosion meter capable of measuring and storing data from all types of electrical resistance (ER) corrosion probes. The instrument is light weight, microprocessor-based, and features a simple, menu-driven interface using a keypad and a backlit graphical LCD ...
Manufactured by:VICI Precision Sampling, a company of Valco Instruments Co. Inc. based inBaton Rouge, LOUISIANA (USA)
The LC Tubing Organizer Clip, part number JR-9001, is an essential tool designed for organizing and securing solvent lines in laboratory settings. It accommodates both 1/16-inch and 1/8-inch polymer tubing, making it versatile for use with a variety of equipment, such as beakers, flasks, and bottles. The clip is equipped with a robust stainless-steel spring that ensures the tubing remains ...
Manufactured by:Mustang Sampling, LLC based inRavenswood, WEST VIRGINIA (USA)
Mustang Sampling’s Heat Trace Tube Bundle is the patented power connection that provides power to the sample conditioning system and transports the Analytically Accurate heated gas sample to an analyzer. This unique dual functionality eliminates the need for additional power at the sample point and helps avoid Joule-Thomson ...
Manufactured by:Texas Sampling Inc. based inHouston, TEXAS (USA)
Texas Sampling's Manual Continuous sample system is a closed loop liquid sampler that satisfies many sampling needs. This system will take emission free, representative samples of process while providing operator safety. Our patented valve design ensures zero dead volume throughout the sample valve assembly. Easy to install and operate, process pressure is used to dispense the sample into the ...
Manufactured by:Texas Sampling Inc. based inHouston, TEXAS (USA)
For sampling gases in a sample cylinder. Used for sampling points with a return ...
Manufactured by:Texas Sampling Inc. based inHouston, TEXAS (USA)
A free flowing needle valve allows for continuous flow through a 1" or smaller orifice. The sample valve allows the operator to control the flow of the sample being dispensed. The MD sampler is used for higher pressure and temperature applications where continuous flow is desired or viscous process is ...
Manufactured by:Texas Sampling Inc. based inHouston, TEXAS (USA)
The close coupled blowback system is a very versatile system. Texas Sampling's MB system is designed with the capability to blow static process back into the tank before the sample is obtained. Process Needle Purge (PNP) is used to remove all residual process from the valve. Tank farms and pipelines without sample return are ideal locations for this type of sample ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
Our isokinetic probes are realized to make the sampling easier by placing the probe more precisely in the stack emission flow during isokinetic ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
Metal Samples' new compact MS2601E ER Transmitter (ERT) measures all types of electrical resistance (ER) corrosion probes. The new high-resolution, 16-bit measurement provides faster response, obtaining corrosion rates in hours instead of ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
Metal Samples' new compact MS2600E ER Transmitter (ERT) measures all types of electrical resistance (ER) corrosion probes. The new high-resolution, 16-bit measurement provides faster response, obtaining corrosion rates in hours instead of days. The transmitter can be remote or direct-mounted (shown). The transmitter is available in a weather-proof (IP66) stainless steel enclosure designed for ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
The MS4500L is a hand-held, battery- powered, corrosion meter capable of measuring and storing data from Linear Polarization Resistance (LPR) corrosion probes. The instrument is light weight, microprocessor-based, and features a simple, menu-driven interface using a keypad and a backlit graphical LCD ...
Manufactured by:Mechatest Sampling Solutions based inNootdorp, NETHERLANDS
Miniature Sampler 2, 10 and 20 ml sample volume! The GC Vial Liquid Sampler from Mechatest is simply the smallest and best solution to take samples specific for laboratory and chromatography applications. Direct from the process line, direct into the sample vial! This unique sampler have a reputation for reliable service and provides accurate samples of many chemical samples, solvent mixtures ...
Manufactured by:FAMAT Sampling System based inSembrancher, SWITZERLAND
The 250A Tank Bottom Valve is specifically engineered for efficient and precise draining, making it an ideal choice for industries requiring reliable discharge solutions from tanks. This valve, offered by Famat Sampling, has a nominal size of DN 50 (2 inches) and can operate under extreme temperatures, ranging from -20°C (-4°F) to +180°C (356°F). It is designed to withstand ...
Manufactured by:Sampling Systems Ltd. based inWarwickshire, UNITED KINGDOM
SteriWare is range of high quality single use sampling devices and laboratory ware from Sampling ...
Manufactured by:Metal Samples Company a Division of Alabama Specialty Products, Inc. based inMunford, ALABAMA (USA)
The Hydrogen Penetration Monitoring System™ provides a method for directly measuring the rate of hydrogen migration through a vessel or pipe wall. This method actually measures the penetration current set up by the hydrogen as it moves through the steel. By sensing and recording this data directly from the pipe wall, this system offers valuable data which can only be indirectly inferred by ...