- Home
- Equipment
Refine by
Stevens Environmental Equipment & Supplies
33 equipment items found
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The 10-element, cross-polarized GOES Yagi antenna features a sealed rod feed system to withstand harsh environments and weather events. Constructed out of durable aluminum, the boom is 1″ in diameter, and the elements are 3/8″ diameter. Included mounting hardware allows the antenna to be attached to pipes from 1″ to 2.5″ max ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Handi-TRASE is a portable Time Domain Reflectometry (TDR) soil moisture measurement system developed by SoilMoisture Equipment Corp. It is the only portable profiling probe available that measures volumetric water content at depths up to 40 cm (16 inches), and is specifically designed for field applications requiring deeper soil analysis. The Handi-TRASE portable soil sensors serves as an ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The BHT is a digital sensor that measures barometric pressure, ambient temperature, and relative humidity. All sensing elements are integrated within a single probe and radiation shield. The BHT features a low-power, digital output with a Modbus RTU interface and has an optional SDI-12 ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Stevens SDX (Submersible Depth Transmitter) is a pressure sensor that provides accurate measurement results while offering an affordable solution suitable for various level measurement applications. Its high-impact, corrosion-resistant PVC Type II housing and potted electronics ensure durability in most water and challenging fluid environments. The copper tip is designed to reduce algae ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
A soil infiltrometer is a device used to measure the rate at which water infiltrates into the soil. That is, how quickly water moves from the surface in the field into the ground. Infiltration rate equals the change in water depth on surface divided by time. Time intervals measurements are typically every 5 to 10 minutes. It is widely used in agriculture, hydrology, environmental science, ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Stevens standard figure plates are available in three sizes: 2 x 3 inches, 3 x 4 inches, and 4 x 6 inches. Figure plates are commonly used with Style E gages and Style M gages, but can be used with any staff gage style or custom staff gage ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The HydraGO and HydraGO FLEX represent the most advanced portable soil sensor system. Simply insert the probe into the soil, and tap on the “Sample” button in the HydraGO app. The HydraGO and HydraGO FLEX communicate wirelessly with your smartphone or tablet using Bluetooth. Both systems features a rugged, Delran housing that contains a rechargeable battery. The internal battery will ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
SVR is a non-contact method for measuring surface flow velocity in open channels. The SVR uses radar technology to measure the Doppler shift of electromagnetic waves reflected from the water surface. The Doppler shift is proportional to the water’s surface velocity and can calculate the velocity of water at various ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Style M staff gages are marked in metric units, with graduation marks every centimeter and numbering every decimeter. Style M is sold in one size, 65mm wide by 1 meter tall. Custom levels may be marked by figure ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Style I staff gages feature graduated marks every .25 inches. Numerical marks are printed every inch. Style I comes in standard sections, each 2.5 inches wide, with heights available in 14, 18, 24, 30, 36 and 48 ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Stevens’ SatComm is a satellite communication radio certified by NESDUS / NOAA for remote environmental monitoring data transmission via the GOES (Geostationary Operational Environmental Satellite) Data Collection System (DCS). The GOES system covers North, Central, and South America. This system is particularly beneficial for monitoring water levels, weather conditions, and other environmental ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Globe Temperature (GT) sensor measures the temperature of the environment in a way that mimics how humans and animals perceive heat. GT absorbs heat from radiation such as the sun, air, and ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
A permeameter is a laboratory device used to measure the permeability (or hydraulic conductivity) of soils and other porous materials —typically soils, rocks, or membranes—to water or other fluids. A permeameter measures how easily water passes through a material. Water flow through soil can be measured using a ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Wind Anemometer Sensor is a durable device designed to measure wind speed and direction. It utilizes three rotating cups or cones driven by the wind, with rotational speed corresponding to wind velocity. The wind direction is determined using a lightweight vane with an arm that aligns with the wind’s angle; the vane’s position indicates the wind direction. This Modbus-enabled smart ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Viper is a data acquisition platform that offers features comparable to the Stevens’ Steelhead system. It enables remote configuration, data processing, alarm notifications, and system interaction through secure online access from any location. The Viper is specifically designed for long-term temperature monitoring of high-powered utility electricity systems using PT100 temperature sensors. It ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Stevens’ Smart PT is a ceramic membrane pressure and temperature sensor that provides highly accurate measurements (0.05% of full scale) across a broad range of fluid level monitoring applications. In addition to real-time instantaneous readings, this intelligent sensor offers capabilities such as capturing peak crest levels and automatically sampling and reporting basic statistical data at ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Style E staff gages feature graduated marks every tenth of a foot. Each section is 3.5 inches wide, and is available in 1, 2, or 5 foot tall sections. Style E is not numbered, so figure plates are available for applications that require ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Custom water level staff gages (also spelled “gauges”), as with Standard gages, are measuring devices used to visually monitor water levels in rivers, lakes, reservoirs, wetlands, or other bodies of water. These gauges are considered "custom" when they are specifically designed to accommodate site conditions, user preferences, or regulatory standards. Tailored to particular needs, custom gauges ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Stevens SDI-12 Xplorer enables easy programming of any SDI-12 sensor simply by connected the sensor to a computer’s USB port. Configuration of the sensor can be done using any terminal program or Stevens Xplorer Windows-based software. One side of the SDI-12 Xplorer features a USB Type-B connection for plugging into a computer. The other side of the SDI-12 Xplorer has +12 V out, GND, ...