- Home
- Equipment
Refine by
Applications
- Pressure sensor for Shipbuilding & marine industry
- Pressure sensor for Water supply
- Pressure Sensor for Ground and surface water
- Pressure sensors for Oil & subsea industry
- Pressure sensors for gas industry
- Pressure sensors for Mining industry
- Pressure sensors for Life science & medical industry
- Pressure sensor for Desalination industry
- Pressure Sensor for Water treatment industry
- Pressure sensor for Test & measurement
- Pressure sensors for Aviation industry
- Ground Water level and quality measurement
Sts Environmental Equipment & Supplies
121 equipment items found
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS DP2 is a real Thermo DP2 probe, but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
STS have developed a new system for simulation of Portal Monitors which does not require the adaption or interaction of the existing ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Siloxane Monitor is CE certified. The Enclosure has these external connections: 230VAC 16A. Glands for gas lines: 3* Biogas feed lines: 6mm PTFE/SS piping. Maximum 1Bar input pressure. N2 carrier gas line: 6mm Nylon/PTFE/SS piping. Set at 1Bar at cylinder regulator Technical Grade 99.999%. Vent line: 6mm Nylon/PTFE/SS piping. Vented ~3m high, end of Line flame arrester to be fitted. Or ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Simulation Smart Probes consist of a simulated probe housing STS electronics and cable connector so that it will operate with a real radiation meter. ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The new SAM 940+ is a re-engineered RIID (Radio Isotope Identification Device) with an internal detector designed to address a growing demand for fast, accurate isotope identification. Reduces burden on the operator by leveraging state of the art communication protocols to quickly relay information to a management team. Lightweight design limits fatigue in long operational scenarios or enables ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Safe-EPD simulator is a simulated generic Electronic Personal Dosimeter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the accumulation of dose over time without exposure to ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Radiagem Simulation Probe consist of a simulated probe housing STS electronics and cable connector so that it will operate with a real Mirion Radiagem 2000 meter. ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
Simulated detection and measurement of alpha & beta radiations. ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Safe-PocketSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Survey-Safe simulator is a simulated radiation survey meter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Ludlum Model 3 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
STS manufacture a range of standard probes that can be used with any STS simulated Meter. All the probes use the same technology with some of the large area probes having dual detectors to increase the sensitive measurement area. These probes are all powered from the host meter and connected via the STS 5 pin cable unique to this product range. The connector means its impossible to connect a real ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Siloxane Monitor is CE certified and complies with IGE SR25 ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS EP15 is a replica of a real EP15 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid stimulant spray placed on surfaces and ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS 43-5 is a real Ludlum probe, but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS SBM2D probe may be used with the Digital Canberra MIP10. The Probe has a standard 16 pin fischer connector that plugs directly into the probe port on the ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS RDS30 simulator is a simulated radiation survey meter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency detection head which detects the presence of a simulated radiation field, generated by the Safe-MiniSource, with the resultant reading ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Mini 900 consists of a real Thermo Fisher Mini Instruments 900 series with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS Contamination Trainer is a generic simulated ionising radiation meter for the training of nuclear workers in the identification and quantification of radioactive contamination. The first generic meter made by STS, ideally suited to the University, research and Hospitals ...
Premium
Manufactured by:Safe Training Systems Ltd. (STS) based inWokingham, UNITED KINGDOM
The STS smart interface box allows unmodified meters to be connected to a STS simulation probe. This means that meters do not have to be purchased solely for training purposes and that any of the same series meters can be used with the interface so that the simulator could be shared between end ...
