- Home
- Equipment
Refine by
Swt Environmental Equipment & Supplies
22 equipment items found
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
Gemini Drinking Water Filtration Systems are versatile two-stage, three-stage, and even four-stage, 'bracketless' filter systems that are perfect for homes and offices everywhere. The Gemini's simple mix-and-match design allows for a variety of configurations to fit your ...
Manufactured by:Stockholm Water Technology AB based inTäby, SWEDEN
All-in-one small footprint packaged system, for safe & sustainable freshwater production. Using a patented solution, Fors reduces commonly found pollutants without compromising with the water’s naturally rich taste. Fors comes as Fors S, Fors M and Fors L, where Fors S comprises 1 CAP 3D module, Fors M comprises 2 CAP 3D modules and Fors L comprises 4 CAP 3D for multiplied water ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
SWT does it again! We’ve made the filtration of sub-micron particles simple, affordable, and available at a high flow rate. SWT’s BraneWave UF Systems are capable of removing all waterborne pathogens and colloids to provide particulate-free, pure water on demand. Using the highest quality materials, we have packed more than five miles of membrane into a point-of-entry ultrafiltration ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
Micronizer is designed to be installed in the water line just prior to the inlet of the hydropneumatic tank it serves. This mechanism is a venturi that draws air into the water line through the air inlet / check valve combination to continually charge the water with air. Excess air in the tank is relieved through an AVC assembly or an optional air vent installed in the ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
SWT Air Injector Assemblies combine a Micronizer venturi air injector with a PVC bypass loop to save time and energy in the field. Air injection is the chemical-free way to oxidize dissolved iron and sulfide in the water. These non-corrosive assemblies are designed for well water applications and can be used with FilterEase™, Carbon, and MetalEase™ systems to greatly enhance their ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
SWT's Boiler treatments are specifically designed for corrosion protection, antiscalents, and oxygen scavaging. Our analytical frequent inspection services range from chemical composition testing to corrosion monitoring, in order to insure that the chosen chemical treatment program is doing an effective job at the lowest cost ...
by:SWater-saas based in, ITALY
With the introduction, in the last decade, of increasingly restrictive regulatory limits for the discharge of treated wastewater (Legislative Decree 152/2006) or their reuse for irrigation and industrial purposes (Legislative Decree 185/2003), it was necessary to carry out up-grade interventionso adaptation of existing purification plants and the use of innovative technologies capable of ensuring ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
Metal-Rec 40 is a sodium dimethyldithiocarbamate-based formulation that is designed to provide low-cost treatment of circuit board wastewater and other heavily chelated metal waste streams. Additional coagulant generally required when using this product. These are the most popular of our Metal-Rec line, but are only few of more than one dozen different Metal-Rec treatment chemistries we ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
SWT provides a full line of coagulant products for wastewater clarification. These products are designed to work in conjunction with SWT’s Insolmet and Metal-Rec lines of precipitants. A wide variety of coagulant options are available to provide the best mix of water clarity, upset minimization, sludge generation, ease of use, and product cost. Because we are a manufacturer, not a reseller, ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
SWT’s Premium Reverse Osmosis System (P/N RO23802-50) provides up to 50 gallons per day of high quality water. Reverse Osmosis (RO) technology allows the homeowner to enjoy bottled water quality from the tap at a fraction of the cost and with none of the ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
SWT offers a selection of anionic and cationic flocculants in both liquid and dry forms. These flocculants are used in wastewater plants to improve sludge dewatering, filtration, sedimentation, flotation and other separation processes. It is recommended that centrifugal pumps not be used for pumping polymer. Below is a sample of the most popular of our flocculant products, but we have over 40 ...
by:SWater-saas based in, ITALY
IFS ( Integrated Fixed-film activated Sludge ) MBBR / IFAS - Calculation / Verification / Simulation Procedure for Biological Denitro-Nitro Purifiers integrated by adding Carrier according to MBBR ( Moving Bed Biofilm Reactor ) scheme . The IFS technological scheme is often used to upgrade / upgrade traditional activated sludge plants). The IFAS mathematical procedure intends to evaluate the ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
Southern Water Treatment, Inc., has patented NOx and SOx reducing agents that sucessfully scrub these corrosive gasses from the gas stream at neutral pH's, thus greatly reducing scrubber operating costs while removing particulate matter and insoluable metals such as mercury, arsenic and ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
Safe Water Technologies’ Residential Sediment Filters are built utilizing SWT’s FilterEase™ filter media. These filters are designed to remove ferric iron, silt, and turbidity. Sediment filtration as low as 10 to 20 micron is common. Plus, these systems feature SWT’s Cyclonic Distributor System™ to provide full bed contact, less channeling, and superior ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
Safe Water Technologies manufactures easy to install, and easy to operate, industrial-sized softeners and filters. We specialize in flow rates up to 500 gpm. SWT’s systems utilize a choice of either metal or plastic diaphragm valves. Steel tanks with NSF approved liners and primers, or filament wound polyglass tanks for caustic environments are both available. Special steel tanks with ...
by:SWater-saas based in, ITALY
ALT ( ALTernating aeration cycles ) - Calculation / Verification / Simulation Procedure for Denitro / Nitro Purifiers with Intermittent Aeration Cycles (in a single tank). It is a technological scheme very similar to the traditional CAS , where the nitrification and denitrification cycles are obtained through intermittent aeration cycles (ALTernati). The ALT scheme is often used to upgrade / ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
SWT’s Countertop Water Filtration Unit (P/N CT-10) is designed to conveniently and economically provide fresh, filtered water directly from your own tap. It comes with a special diverter valve to replace the aerator currently on your faucet. When filtered water is desired (for drinking, cooking, etc.), simply turn on your faucet and pull the diverter valve’s piston knob to the ...
Manufactured by:Southern Water Treatment, Inc (SWT) based inGreenville, SOUTH CAROLINA (USA)
The Metal-Rec line of precipitants have been formulated to remove heavy metals from the effluents of plating baths, etching solutions, and rinses containing soluble metals. MR-500C is especially effective at treating strongly chelated nickel solutions. MR-500C is able to treat: ...
by:SWater-saas based in, ITALY
The SBRs (Sequencing Batch Reactors) represent discontinuous flow biological treatment systems, consisting of a basin in which biological oxidation and sedimentation processes develop and from which both the purified effluent and the sludge are extracted. I overcome. These processes are carried out at different times, cyclically varying the operating conditions of the plant; by appropriately ...
Manufactured by:Safe Water Technologies, Inc. based inElgin, ILLINOIS (USA)
SWT’s Inline Filters offer a wide range of products to meet your most challenging needs. They are an ideal choice for post-RO, under-sink, icemaker, and food service applications. All inline filters feature a durable, injection molded polypropylene body and cap, are pressure rated to 125 psi (8.62 bar), include a pre- and post-filter, and are available with a variety of inlet/outlet ...