- Home
- Equipment
Refine by
Tideflex Environmental Equipment & Supplies
12 equipment items found
Manufactured by:DeZURIK, Inc. based inSartell, MINNESOTA (USA)
Tideflex Duckbill Check Valves have low head loss and achieve the tightest possible seal for backflow operations, especially at low flow rates. The flexibility of the Tideflex Check Valve allows the valve to compress around trapped solids, providing a much better seal than flap gates. The sealing capabilities were further improved with the patented Curved Bill which is more flexible than the rest ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CheckMate UltraFlex In-Line Check Valve is the valve of choice for municipal and industrial applications such as stormwater, wastewater, highway run-off, CSO, SSO and flood control. CheckMate UltraFlex Valves have become the specified solution for residential and commercial areas where complete, dependable backflow prevention is necessary to prevent surcharging and ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CTF - Series TF-1 Duckbill Check Valve has become the preferred Tideflex® Check Valve configuration for outfalls. Designed for in-structure and end-of-pipe installations, the TF-1 features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. This is especially important in low-lying ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
In some applications, a Slip-on Tideflex Duckbill Check Valve (TF-1) is not feasible because of an existing mating flange or wall thimble, or a flanged connection is preferred, or it is desired to mount the valve directly to a concrete wall. In these cases, the CTF - Series 35-1 Flanged Duckbill Check Valve is the ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CIL - Series 37G In-Line Check Valve is a special adaptation of the Series 37. The 37G can be completely inserted into a pipe which effectively gives it a zero face-to-face dimension. The outside diameter of the 37G’s cuff is fabricated to precisely match the inside diameter of the pipe, providing a press-fit. The valve is supplied with an internal expansion clamp to provide compression ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The Tideflex Technologies Series 39 Slurry Duckbill Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. At the heart of the Series 39 Duckbill Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure drop across the valve at all times. Forward pressure opens the valve automatically; reverse pressure seals ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The large-diameter CIL - Series 39F In-Line Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. The valve’s operation is silent and non-slamming, just like the smaller Series ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CTF - Series TF-2 Duckbill Check Valve was the first duckbill check valve introduced by Tideflex. The TF-2 was developed based on a United States Environmental Protection Agency (EPA) grant in the 1980s to overcome excessive costs in maintenance and replacement of non-performing flapgates. The TF-2's flared top and bottom design has been enhanced by the Series TF-1 Duckbill Check Valve. The ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CTF - Series 35 Flanged Duckbill Check Valve is manufactured similarly to the Series TF-2, with the addition of an integral elastomeric flange. The Series 35 can be mounted to mating flanges or wall thimbles or directly to concrete walls. The Series 35's design has been enhanced by the flat-bottom design pf the Series 35-1 Flanged Duckbill Check Valve. The 35-1 requires minimal bottom ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CIL - Series 37 In-Line Flanged Check Valve is a simple, reliable, cost-effective solution for backflow prevention. The revolutionary design of the 37 is similar to the Series 35, but the Series 37 bill does not flare and is designed to be inserted into the downstream pipe and fastened between two mating flanges, eliminating the need for a valve body. Because most of the valve is inserted ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
The CWF - Waterflex Check Valve is specifically designed for potable water and clean water applications with low suspended solids. The valves are NSF61 Certified for potable water applications. The Waterflex comprises a rod-guided ply-reinforced membrane and perforated disc. The Waterflex is available in a wafer style (WF-2) and full-faced wafer style with ASME, DIN or other standard drilling ...
Manufactured by:Tideflex Technologies - a Division of Red Valve Company, Inc. based inPittsburgh, PENNSYLVANIA (USA)
Manufactured on the same principle as the revolutionary all-rubber Tideflex Check Valve, the CIL - Series 2633 In-Line Check Valve is a simple in-line check valve for threaded end pipelines. Simple in design, the Series 2633 consists of a body, two endcaps and the working element - the Tideflex elastomer check sleeve. In the open position, the sleeve creates a wide, free passage proportional to ...