- Home
- Equipment
Refine by
Vapor Environmental Equipment & Supplies
30 equipment items found
Manufactured by:Vapor Pin based in, UNITED KINGDOM
Forms the seal between the VAPOR PIN® sampling device and the slab. ...
Manufactured by:Westmoor Ltd. based inSherrill, NEW YORK (USA)
Kits include vanes (blades), bearings, oil seals, O-Rings or Gaskets, Shims, Bearing Covers, Bearing Cover screws and shaft ...
Manufactured by:VAPOR-NOVA based inCameri, ITALY
Blades and grinders for shredders with both standard and on request profiles. Complete set of spacers and cleaning sectors for shredder. Sharpening and grinding used and worn blades. Blades and knives for mills and scrap shears. Repair and overhaul shredders - revised used shredders. ...
Manufactured by:Calgon Carbon Corporation based inMoon Township, PENNSYLVANIA (USA)
Calgon Carbon's VAPOR-PAC carbon adsorption service meets industrial and remediation needs for cost-effective removal of volatile organic compounds (VOCs) at air emission sources. ...
Manufactured by:Calgon Carbon Corporation based inMoon Township, PENNSYLVANIA (USA)
Steel adsorber designed similarly to a roll-off box used to treat flows up to 10,000 cfm. When the carbon is exhausted, the vessel is returned to Calgon Carbon. The increasing emphasis on cleaner air presents the industry with new challenges to control and reduce toxic volatile organic compounds (VOCs) at air emission sources. To help facilities comply with current and future VOC regulations, ...
Manufactured by:Daimer Industries Inc. based inLawrence, MASSACHUSETTS (USA)
The Vapor-Flo 8550 is a powerful, mobile pressure washer that is powered and heated by ...
Manufactured by:Daimer Industries Inc. based inLawrence, MASSACHUSETTS (USA)
The Vapor-Flo 8910 is a fully electricity powered and heated pressure cleaner that offers both hot and cold temperature options for wider cleaning ...
Manufactured by:Daimer Industries Inc. based inLawrence, MASSACHUSETTS (USA)
The Vapor-Flo 8970 is a completely electric pressure cleaning system designed for commercial and industrial cleaning needs. This electric pressure washer offers a cold water cleaning option for lighter cleaning applications and hot water for tough ...
Manufactured by:Daimer Industries Inc. based inLawrence, MASSACHUSETTS (USA)
The Vapor-Flo 8210 is a mobile, all electric pressure wash machine with hot and cold water temperature ...
Manufactured by:VAPOR-NOVA based inCameri, ITALY
Vertical heating boiler equipped with an electric motor independent from that of the water pump in order to allow cold operation without involving the diesel pump. Air conveyance cavity that allows both the cooling of the combustion chamber and the preheating of the combustion air Coil in seamless steel tube. Three ceramic piston pump flanged directly to the electric motor. Automatic pressure ...
Manufactured by:LATICRETE International, Inc. based inWaterloo, ONTARIO (CANADA)
VAPOR BAN™ E protects moisture/pH sensitive floor coverings such as most resinous coatings, vinyl, rubber, VCT, carpet, wood, ceramic tile and stone. It can also be used a floor primer for slabs contaminated by petroleum, vegetable oil, and other chemicals. VAPOR BAN E concrete vapor barrier exceeds the ASTM F3010 standard. It can be pigmented with SPARTACOTE® Universal Pigments (a line ...
Manufactured by:VAPOR-NOVA based inCameri, ITALY
Three ceramic piston pump. High efficiency boiler with seamless steel tube coil ø l7 mm having a development of 28 meters which allows to reach high temperatures with low consumption of diesel. Burner motor independent from that of the water pump to allow cold operation without the risk of damaging the diesel pump in the absence of ...
Manufactured by:ErtelAlsop based inKingston, NEW YORK (USA)
The ErtelAlsop Vapor-Master enclosed plate and frame filter press permits filtration of harmful fluids in a completely sealed, vapor-tight environment for both venting and the safe disposal or recovery of filtrate or cake residue. This patented design eliminates exposure of workers to toxic vapors from solvents used in cake washing during the extraction process. Filtration units can be custom ...
Manufactured by:Vapor Power International based in
Vapor Power electric hot water generators are designed to provide fast, efficient, and economical hot water for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired water temperature. All boilers utilize ASME pressure vessels and all electrical components are UL listed and are wired ...
Manufactured by:Falmouth Products Inc. based inButner, NORTH CAROLINA (USA)
Falmouth Products Vapor Control Valve (VCV) is installed inline on the vacuum side of the extraction blower. The VCV enables the FALCO to start up, operate automatically, and cooperate with the temperature controllers to regulate input vapors. The VCV minimizes power use by accurately maintaining maximum input concentration consistent with the heat recovery ...
Manufactured by:Benzaco Scientific, Inc., part of LSC Environmental Products based inWashington, DISTRICT OF COLUMBIA (USA)
Benzaco’s forced air linear diffuser vapor systems employ a patent-pending process to produce a uniform and consistent release of an odor control solution as sub-micron vapor. The dry odor control vapor provides an increased opportunity for collision with nuisance odor compounds where a series of chemical reactions to counteract the odor in the air. Our systems are commonly used to treat ...
Manufactured by:Vapor Pin based in, UNITED KINGDOM
Used to close sampling port when not in use. Vapor Pin® Caps are placed on top of any type of Vapor Pins equipped with barb fittings or quick connects, and prevent soil gas from escaping between sample events. Caps should be replaced each time the Vapor Pin® sampling device is installed. ...
Distributed by:Innodys S.a.r.l. based inMennecy, FRANCE
The ACCUDRY uses the difference between the surface tension of deionized water and isopropyl alcohol (IPA) vapor to produce a gradient that generates fast and effective drying of substrates. Also know as an IPA ...
Manufactured by:VAPOR-NOVA based inCameri, ITALY
The models of F2 & F3 cold water high pressure cleaners have three ceramic piston pumps flanged directly to the electric motor at 1400 rpm. Automatic pressure regulation valve. Predisposition for TOTAL STOP device. On F2 detergent tank with adjustable device on the lance for drawing additives in low pressure. STANDARD EQUIPMENT: athermic lance with gun control, high pressure hose mt. 10 (on ...
Manufactured by:LATICRETE International, Inc. based inWaterloo, ONTARIO (CANADA)
VAPOR BAN™ ER is a rapid curing, single-coat moisture vapor barrier designed for controlling the moisture vapor emission rate from new or existing concrete slabs. A two-part, 100% solids epoxy, it exceeds ASTM F3010 standard with a perm rating of 0.094 grains/h/ft2 /in. Hg (5.4 ng/h • m2 • Pa). VAPOR BAN ER is oil tolerant and can be applied by squeegee or roller. For decorative ...