- Home
- Companies
- Teledyne Hanson Research
- Products
- Media-Mate Plus - Dissolution Media ...
Media-Mate Plus - Dissolution Media Prep System
The Media-Mate Plus™ is the perfect media-prep system for a busy dissolution lab that demands both speed and accuracy. It delivers pre-heated, filtered, deaerated, and volumetrically dispensed media to 6 or 7 dissolution vessels simultaneously in less than five minutes. Built on a unique ergonomic cart, the Media-Mate Plus offers maximum portability for easy servicing of many dissolution test stations. The Media-Mate Plus exceeds USP / US FDA recommended media deaeration specifications making it one of the most effective tools in ensuring successful Performance Verification Tests (PVT). By significantly reducing dissolved oxygen levels and dispensing media simultaneously into 6 or 7 vessels, the MediaMate Plus eliminates the variable caused by Prednisone tablets that are highly sensitive to dissolved oxygen levels, thus facilitating successful passage of PVT tests.
Simple Operation
Operational panel provides easy-to-use controls. One simple button initiates complete media measurement/deaeration/dispense cycle. Fills dissolution vessels in less than 5 minutes.
Volume Adjustment
Volume change adjustments provide quick and easy volume settings from 250 mL to 1,000 mL in 50 mL increments. Fill 6 or 7 vessels in Hanson, Agilent, VanKel, Distek, Erweka, or other dissolution testers.
- Preheats, filters, deaerates, and volumetrically dispenses media in less than 5 minutes
- Delivers media to 6 or 7 vessels simultaneously
- Easy adjustments for precise volumetric dispensing with ±1% accuracy
- Mobile, ergonomic cart for easy use around the lab
- Convenient retractable power cord
- Measuring vessels made with corrosion-resistant parts
- Compatible with nearly all dissolution testers
- Interchangeable pre-heat tanks (10-40 L) can be conveniently dedicated to different media and buffers
- USPandcompliant
- Full compliance to USP Toolkit (dissolved oxygen below 6 ppm)
- The most important tool for ensuring successful PVT tests
-
Interchangeable pre-heat tanks (10-40 L) can be conveniently dedicated to different media and buffers. Order an extra tank, heater, and temperature control for this purpose.
AutoPlus
- Weight:
- Without media: 67 kg (148 lbs.)
- With 40 liters of media: 107 kg (236 lbs.)
- Dimensions (H x W x D): 114.0 cm (44.8 in.) x 53.4 cm (21.0 in.) x 80.9 cm (31.9 in.)
- Electrical:
- Voltage: 115 VAC or 230 VAC ± 10%
- Frequency: 50/60 Hz
- Current: 13 Amp (115 VAC) or 8 Amp (230 VAC)
- Phase: single
Environment: Maximum ambient temperature: 5 °C below temperature set point Maximum humidity: < 85 %
Performance
- Cycle time: less than 5 minutes
- Pre-heat temperature range: 30 °C to 45 °C
- Pre-heat temperature control accuracy: ± 0.5 °C
- Pre-heat temperature readout accuracy: ± 0.2 °C
- Pre-heat time (21 to 37 deg C): 60 minutes
- Delivery volume range: 250 mL to 1000 mL
- Delivery volume accuracy: ± 1.0 %
- Deaeration: 95% saturation maximum
- Filtration: 5 micron nominal
Tank capacities:
- Media tank volume (usable): 40 liters (10.5 gal)
- Media tank volume (unusable): 2 liters (0.53 gal)
- Media volume to top of filter: 8 liters (2.1 gal)
- Low water level sensor volume: ~18 liters (4.8 gal)
Wetted Materials
- Tank: High density polyethylene
- Heater: Teflon coated
- Filter: Polyethylene
- Vessel: SAN (styrene/acrylonitrile)
- Fittings and fill hose: PVC
- Tubing: Stainless steel and Tygon