- Home
- Companies
- Ingenjorsfirman Geotech AB
- Products
- GEORIG - Model 220 - Rig
GEORIG - Model 220 -Rig
GEORIG 220 is designed for CPT/CPTU and static penetration and has a pushing capacity of 200 kN. With optional equipment it is also possible to perform dynamic sounding/SPT, vane testing and sampling. The feed force is adjustable from 0 up to 200 kN. Equipped with an overload control unit it is also possible to pre-set a maximum resistance when the hydraulics should be shut off, this is collected from the point resistance in the probe. The main cylinders who are used for pushing and pulling is controlled by two valves which one is adjustable for pre-setting to appropriate speed (eg. 20mm/sec for CPT) and the other is "full" speed.
Georig 220 carries all equipment on board. Rod quiver, anchor rack and storage box are standard equipment so you have everything in one place and don`t need to carry equipment separately.
Depending on soil conditions reaction force will appear and the rig needs to be anchored. This can be done with up to four anchors.
- Engine: 25 kW Diesel, 3 cylinder
- Stroke: 1500 mm
- Push force, max: 200 kN
- Pull force, max: 200 kN
- Weight: 2 000 - 2 500 kg depending on equipment
- Length: 2650 mm
- Width: 1660 mm
- Height: 1790 mm