Somat - Model SP-75S -High Tank (HT) Pulper

As much as 8 to 1 (87.5%) volume reduction

• Reduced labor cost
• Better sanitation
• Water conservation
• Improved operator morale
• Reduced silverware loss

Processes a wide variety of waste

Foodservice waste enters the pulping tank via the feed tray where it mixes with water, is processed and made into a slurry. The slurry, consisting of 5% solids and 95% water, is automatically transported through a pipeline to the Hydra-Extractor, where water is removed and the resultant semi-dry pulp is discharged into a haul-away container. The extracted water is recovered and returned to the pulping tank for re-use.

Somat equipment provides an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling. Manufactured by Somat Company of Lancaster, Pennsylvania, originators of waste pulping systems and specialists in waste reduction technology.

Pulper: 30” diameter, 39.5” high polished stainless steel tank with water flushed feed tray, hinged lid with limit switch, 3/8” thick stainless steel slurry chamber, 7 ½ HP TEFC direct drive motor, internal junk box and cutting mechanism, HyPoint cutting mechanism, stainless steel, consists of 1 piece security ring with 4 stationary, replaceable top cutters and impeller with 2 replaceable rotating cutters.

Valve Package: All valves required for proper operation (fresh water, tray flush and drain lines).

Som-A-Trol (Electrical Control Panel): UL approved. Includes all necessary electrical components prewired to a terminal strip; water level control and push button station, in a NEMA 4 stainless steel enclosure.

• Feed Trough Connection
• Feed Tray Cover
• Prison Package
• Under Dish Table Unit

• Dual water level control and motor operated valve with controls. Required if more than one pulper operating with a single Hydra-Extractor.
• Stainless Steel Dam. Required when pulper is located higher (one level minimum) than the Hydra-Extractor.

• Electrical Characteristics: 208/230/460 volt, 3 phase, 60 Hz.
• Capacity: 1250 pounds per hour of foodservice waste mix, consisting of food scraps, plastics, milk cartons, paper, aluminum foil and cardboard.
• Finish: All exterior surfaces are polished stainless steel.