InduMar Products, Inc.
- Home
- Companies
- InduMar Products, Inc.
- Products
- InduMar - Model Stop It AP 125 - ...
InduMar - Model Stop It AP 125 -Adhesion Promoter
Better adhesion for plastic and fiberglass pipes. Our adhesion promoter is a two-part acrylic-based adhesive (1:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and TPOs without special surface preparation. It enhances the bond between STOP IT resin and plastic or fiberglass pipes and will be required for applications involving these substrates.
Most popular related searches
pipe repair system
fiberglass pipe
surface preparation
leak sealing
pipe repair
plastic pipe
plastic piping
pipe system
mixing system
- Ability to bond dissimilar substrates
- Ability to structurally bond polyolefins
- Room temperature cure
- Excellent water and humidity resistance
- Very good chemical resistance
- One-step Process - no pre-treatment of the polyolefin substrates needed
- Solvent-free adhesive system
- Convenient hand-held applicator system
- Available in 8ulk
- One-person application
- Minimum surface preparation
- Short cure time
- Fully compatible with STOP IT® PIPE Repair System
- Shelf Life: 12 months when stored @ 55°F to 75°F (12°C to 24°C)
- Physical Form: Two-part, solvent-free resin system
- Mixing Ratio: 1:1
- Working Time: 6-8 minutes
- Mixed Viscosity: 50,000 cps
- Application Thickness: <0.02n
- Coverage: Each 50 ml_ cartridge coats 250 ina at the recommended thickness; 400 ml cartridge coats ~2000 in2
- Water Resistance: High
- Chemical Resistance: Very Good