- Home
- Equipment
Refine by
Indumar Environmental Equipment & Supplies
23 equipment items found
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The Flat Patch Tank Repair Kit is a carbon-epoxy composite repair system designed for active sealing applications where localized repair is needed or full pipe wraps are impractical. The system combines a preformed carbon sheet with advanced adhesives to enable working pressures up to 1,000 PSI (70 kg/cm2) and operating temperatures ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
This field-mixed novolac epoxy resin and advanced-weave fiberglass combine to provide high-strength reinforcing composite layers, demonstrated to build back wall thickness and corresponding strength. ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The Load Transfer Filler Compound (LTF5) is a fast setting, no VOC, /high compression strength epoxy composite designed for filling and sealing pipe surface defects and voids. The LTF5 Compound is field-mixed, steel- and ceramic-filled, two-part epoxy supplied in pre-measured quantities. The cured compound exhibits superior mechanical properties and high adhesion to both ferrous and nonferrous ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Bore Shield ARO GW is a field-applied abrasion resistant outerwrap (ARO) consisting of a unique, heavy duty fiberglass reinforcement and water-activated urethane resin, designed for impact and abrasion resistance when installed over pipeline girth ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
XCorr SA provides a composite repair solution specifically for sulfuric acid piping. A two-part novolac epoxy is paired with with fiberglass reinforcements to create an acid resistant pipe wrap able to seal leaks and withstand high internal ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The SaddleWrap" system is a fast curing, in-field composite wrap system, ideal for joint reinforcement and abrasion resistance in saddle support ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
XCorr HP is a multi-component epoxy composite repair system designed for high-pressure sealing applications. The repair system provides a built in 4:1 safety margin. XCorr® HP utilizes a premeasured 2-part epoxy system combined with high performance fiberglass reinforcement fabrics and a technical felt to provide superior leak sealing capacity with strong interfacial ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Better adhesion for plastic and fiberglass pipes. Our adhesion promoter is a two-part acrylic-based adhesive (1:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and TPOs without special surface preparation. It enhances the bond between STOP IT resin and plastic or fiberglass pipes and will be required for applications ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Designed to quickly respond to leaks in straight runs of piping. Simply snap the clamp around the pipe, drop bolt head through open-slotted lug, and tighten nuts. Versatile clamps respond to water, wastewater, fuel, chemical, air and gas ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Covers a large hole, crack, or gash in a large vessel or tank with a patch that conforms to the curvature of the vessel. The patch uses a variety of T-bolts to support itself directly to the hole. The leak is then sealed by tightening the compression bolts around the frame, conforming the patch to the ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
A leaking pipe can shut down production for hours, costing you valuable lost production. STOP IT can have you back up and running in about 30 minutes. The STOP IT® Pipe Repair System fixes cracks and leaks in carbon steel, stainless, aluminum, copper, galvanized, PVC, CPVC, PVDF, polyethylene, polypropylene, fiberglass, and other pipes so you don’t have to face the consequences of a ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
This high performance epoxy resin and advanced-weave fiberglass reinforcement create a PCC-2 compliant composite, which is easy to install, yet provides superior mechanical strength and high chemical resistance. ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Bore Shield ARO I System is a field-applied abrasion resistant outerwrap (ARO) consisting of a unique, heavy duty fiberglass reinforcement and water-activated urethane resin, designed for impact and abrasion resistance in weld seam, small pipeline, and riser applications. The BoreShield ARO™ I System provides protection from external wear, abrasion, and impact events. The composite system ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Bore Shield ARO II System is a field-applied abrasion resistant outerwrap (ARO) consisting of a unique, heavy duty fiberglass reinforcement and water-activated urethane resin, designed for impact and abrasion resistance in weld seam, pipeline, directional drilling and piling applications. The Bore Shield ARO II System provides protection from external wear, abrasion, and impact events. The ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
FIX STIX epoxy is a hand-mold able, industrial-strength, steel-reinforced epoxy that seals leaks, plugs holes, and fills cracks. The versatile epoxy forms strong bonds to steel surfaces and is useful for a wide range of ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Combines a proprietary epoxy sealant with a durable composite overwrap to accomplish field repair of leaks to systems with operating pressures up to 2500 psi. The STOP IT PSX Repair System derives its high-pressure capabilities from the use of a field-mixed, two-part epoxy primary sealant and a fiberglass/urethane composite ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The STOP IT Gas Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4" and 1" standard anodeless risers. It is comprised of a strong knitted fiberglass tape coated with fast setting, water-activated urethane resins. The STOP IT Gas Riser Rehabilitation Kit also includes FIX STIX®. a steel filled hand moldable epoxy ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Fusion Tape won't crack or separate with a sudden shock, vibration, expansion or contraction, making it an easy, secure long-term solution to tears and rips in wires, pipes, and ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
While our specialty is providing composite-based solutions for pipe leaks and remediation, our product line also features universal clamp couplings, bolted couplings, flanged adapters, service saddles, tapping sleeves, expansion joints and ...
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Quickly plugs open-ended pipes, allowing you to instantly plug knocked-off pipes carrying water, fuel, chemicals and gas. Great for knocked-off gas meters and tank truck discharge ...