- Home
- Companies
- S&G Enterprises, Inc.
- Products
- RAM FLAT - Model 55SC - Drum Crusher
RAM FLAT - Model 55SC -Drum Crusher
For low-volume drum crushing. When you are looking to crush a few dozen drums a month, look no further than the Model 55SC. At 40,000 pounds, this powerful machine will crush a drum flat to 6.5 inches tall. Yet, it is still economically priced. The Model 55SC is available in a “standard” electrical version as well as two explosion-proof configurations. Both the Model 55SC and the 55SC-EX use 3-phase electrical power to drive the hydraulic cylinder and controls.
The Model 55SC-P unit uses no electrical power at all, but rather uses standard compressed air to drive a pneumatic air motor. This air motor in turn drives the same hydraulic circuitry that is used on the 55SC-EX. With the exception of the power source, all three versions are identical in operation and specification.
- 40,000 lbs. hydraulic force for inside drum compaction/drum crushing
- 55SC features clearance above drum for drum overfill
- Single Hydraulic Control Lever, semi automatic cycle
- 4″ NFPA cylinder with 2.5″ chrome rod
- Reinforced steel Crushing Chamber with 1″ thick base plate
- 1″ Steel Compaction Head with drum crushing plate included
- Two stage gear pump
- Drum Handling : Move drums to and from the compactor
- Alternate Compaction Head – (CH) : Crush empty drums with the same machine
- NEMA 4 Water Tight Enclosures : A must for outside installations
- PAK-MORE Hold-down Disk : Improve volume reduction
- Air Filtration and Ventilation : Control dust & vapors
- Liquid Containment : Control spills or leftover residue
- Special Custom Options
- Model: 55SC
- Drum/Container Crushing: *
- Inside Drum Compaction: *
- Compaction Chamber Height: 43.0″ / 109.0 cm
- Compaction Chamber Width: 27.0″ / 69.0 cm
- Door Opening Width: 26″ / 66.0 cm
- Full Cycle Time: 115 sec.
- Machine Depth: 31.25″ / 79.0 cm
- Machine Width: 30.25″ / 77.0 cm
- Overall Machine Height: 107.0″ / 272.0 cm
- Electric Motor: 3 HP / 2.2 kW
- Ship Weight Including Oil: 1800 Lb. / 817 kg
- Air Motor for 55SC-P: 130-SCFM @ 90-PSI
Model 55SC
- 3-HP TEFC motor
- Motor Starter housed in a NEMA 1 UL Listed enclosure
- Electric door interlock
- Hydraulic directional cylinder control
Model 55SC-EX
- 3-HP Class 1, Division 1, Group D explosion-proof pump motor
- Non-sparking hydraulic door interlock
- Hydraulic directional cylinder control
Model 55SC-P
- 3-HP Air driven pump motor
- Non-sparking hydraulic door interlock
- Hydraulic directional cylinder control