Teledyne API

- Model T200M - Mid-Range Chemiluminescence Range NO/NO2/NOx Analyzer

From

0

The Model T200M combines the proven chemiluminescence principle with a number of innovative features to provide reliable and repeatable NO, NO2, and NOx measurements for extractive type CEM systems. The option of either a molybdenum converter or a high-efficiency stainless steel thermal NO2 converter allows the T200M to be used in a variety of extractive CEM systems, from gas turbines to coal-fired boilers. The T200M may be fitted with an optional, internal paramagnetic O2 sensor or an infrared absorption CO2 sensor, reducing integration and operating costs significantly.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability.  All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.

The Model T200M comes with NumaView™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView™ Software.

  • Ranges: 0-1 ppm to 0-200 ppm, user selectable
  • Independent ranges
  • Optional ​​internal O2 or CO2 sensor
  • Large, vivid, and durable color graphics display with touch screen interface
  • Ethernet, RS-232, and (optional) USB com ports
  • Front panel USB connections for peripheral devices and firmware upgrades
  • 8 analog inputs (optional)
  • Adaptive signal filtering optimizes response time
  • Temperature & pressure compensation
  • Comprehensive internal data logging with programmable averaging periods
  • Ability to log virtually any operating parameter
  • Two-year warranty​

  • Ranges :
    • Min: 0 - 1 ppm full scale
    • Max: 0 - 200 ppm full scale (selectable, independent NO, NO2, NOX ranges with dual range supported)
  • Measurement Units : ppm, mg/m3 (selectable)
  • Zero Noise : < 20 ppb (RMS)
  • Span Noise : < 0.2% of reading (RMS) above 20 ppm
  • Lower Detectable Limit : 40 ppb
  • Zero Drift : < 20 ppb/24 hours
  • Span Drift : < 0.5% of reading/24 hours
  • Lag Time : 20 seconds
  • Rise/Fall Time : < 60 seconds to 95% (in switching mode)
  • Linearity : 1% of full scale
  • Precision : 0.5% of reading above 5 ppm
  • Sample Flow Rate : 250 cc/min ±10%
  • Power Requirements : 100V-120V, 220V-240V, 50/60 Hz
  • Analog Output Ranges : 10V, 5V, 1V, 0.1V (selectable)
  • Recorder Offset : ±10%
  • Included I/O :
    • 1 x Ethernet: 10/100Base-T
    • 2 x RS232 (300-115,200 baud)
    • 2 x USB device ports
    • 8 x opto-isolated digital outputs
    • 6 x opto-isolated digital inputs
    • 4 x analog outputs
  • Optional I/O :
    • 1 x USB com port
    • 1 x RS485
    • 8 x analog inputs (0 - 10V, 12-bit)
    • 4 x digital alarm outputs
    • Multidrop RS232
    • 3 x 4 - 20mA current outputs
  • Operating Temperature Range : 5 - 40ºC
  • Dimensions (HxWxD) : 7” x 17” x 23.5” (178 x 432 x 597 mm)
  • Weight :
    • Analyzer: 40 lbs (18 kg)
    • External pump: 15 lbs (7 kg)

Customer reviews

No reviews were found for TAPI - Model T200M - Mid-Range Chemiluminescence Range NO/NO2/NOx Analyzer. Be the first to review!