Teledyne API

50 products found

Teledyne API Products

  • Sulfur Compound Instruments

    Teledyne API's Sulfur compound analyzers utilize familiar UV Fluorescence technology to produce reliable and accurate gas measurements. All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. All of our instruments are designed meet the rigorous demands of ambient air quality, stack, or industrial process gas monitoring.

  • TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer

    TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer

    The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring.  The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing applications.

  • TAPI - Model T100U - Trace-Level UV Fluorescence SO2 Analyzer

    TAPI - Model T100U - Trace-Level UV Fluorescence SO2 Analyzer

    The Model T100U Trace-level SO2 analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. It uses the proven UV fluorescence principle, and is designed to allow ultra-sensitive SO2 measurements while still meeting the requirements for use as a US EPA compliance analyzer.

  • TAPI - Model T101 - UV Fluorescence H2S Analyzer

    TAPI - Model T101 - UV Fluorescence H2S Analyzer

    The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring. The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H2S to SO2. A switching mode alternately measures H2S and SO2 while showing both readings concurrently on the front display.

  • TAPI - Model T102 - UV Fluorescence TRS Analyzer

    TAPI - Model T102 - UV Fluorescence TRS Analyzer

    The Model T102 TRS analyzer uses the proven UV fluorescence principle to measure Total Reduced Sulfur at levels commonly required for ambient air monitoring. The Model T102 uses a high temperature external converter set at 850°C to allow conversion of H2S, methyl mercaptan, dimethyldisulfide, and methyl-disulfide to SO2 at this temperature with efficiency greater than 98%. A switching option alternately measures TRS and SO2 while showing both...

  • TAPI - Model T108 - Total Sulfur Analyzer

    TAPI - Model T108 - Total Sulfur Analyzer

    The Model T108 Total Sulfur analyzer is designed to measure mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2.

  • Nitrogen Compound Instruments

    Teledyne API produces a wide range of instruments for the measurement of Nitrogen compounds, including those that measure 'True NO2'. All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. All of our instruments are designed meet the rigorous demands of ambient air quality, stack, or industrial process gas monitoring.

  • TAPI - Model T200 - Chemiluminescence NO/NO2/NOX Analyzer

    TAPI - Model T200 - Chemiluminescence NO/NO2/NOX Analyzer

    The Model T200 NO/NO2/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of-the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS monitor.

  • TAPI - Model T200U - Trace-level Chemiluminescence NO/NO2/NOx Analyzer

    TAPI - Model T200U - Trace-level Chemiluminescence NO/NO2/NOx Analyzer

    The Model T200U Trace-level NO/NO2/NOx analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. It uses the proven chemiluminescence principle and is designed to allow ultra-sensitive measurements with a lower detectable limit of 50 ppt while still meeting the requirements for use as a US EPA compliance analyzer.

  • TAPI - Model T200H - High Range Chemiluminescence NO/NO2/NOx Analyzer

    TAPI - Model T200H - High Range Chemiluminescence NO/NO2/NOx Analyzer

    The Model T200H combines the proven chemiluminescence principle with a number of innovative features to provide reliable and repeatable NO, NO2, and NOx measurements for extractive type CEM systems. A high-efficiency stainless steel thermal NO2 converter provides durable and consistent operation under the harshest conditions (other converter options also available).

  • TAPI - Model T200M - Mid-Range Chemiluminescence Range NO/NO2/NOx Analyzer

    TAPI - Model T200M - Mid-Range Chemiluminescence Range NO/NO2/NOx Analyzer

    The Model T200M combines the proven chemiluminescence principle with a number of innovative features to provide reliable and repeatable NO, NO2, and NOx measurements for extractive type CEM systems. The option of either a molybdenum converter or a high-efficiency stainless steel thermal NO2 converter allows the T200M to be used in a variety of extractive CEM systems, from gas turbines to coal-fired boilers. The T200M may be fitted with an optional,...

  • TAPI - Model T200P - Photolytic True NO/NO2/NOX Analyzer

    TAPI - Model T200P - Photolytic True NO/NO2/NOX Analyzer

    The Model T200P provides measurements of NO and NO2 using our Model T200 NOx analyzer combined with a patented high efficiency photolytic converter. Even low temperature molybdenum converters transform other nitrogen-containing compounds such as HNO3, PAN, etc. to a considerable extent. Simultaneous measurements of NO2 performed with molybdenum and photolytic converters have shown significantly different results in the presence of such compounds.

  • TAPI - Model T200UP - Trace-level, Photolytic, True NO2/NO/NOx Analyzer

    TAPI - Model T200UP - Trace-level, Photolytic, True NO2/NO/NOx Analyzer

    The Model T200UP provides trace level measurements of NO and NO2 using our Model T200U NOx analyzer combined with a patented high efficiency photolytic converter. Even low temperature molybdenum converters transform other nitrogen-containing compounds such as HNO3, PAN, etc. to a considerable extent. Simultaneous measurements of NO2 performed with molybdenum and photolytic converters have shown significantly different results in the presence of such...

  • TAPI - Model T200U NOy - Trace Level Chemiluminescence NO-NOy Analyzer

    TAPI - Model T200U NOy - Trace Level Chemiluminescence NO-NOy Analyzer

    The Model T200U NOy analyzer has been developed and refined specifically to address the challenges of NOy monitoring as required, for example, in the US NCore network. It uses the proven chemiluminescence principle and is coupled with a remote NOy converter via umbilical to allow measurements with a lower detectable limit of 50 ppt.

  • TAPI - Model T201 - Chemiluminescence NH3 Analyzer

    TAPI - Model T201 - Chemiluminescence NH3 Analyzer

    The Model T201 combines a specially configured chemiluminescence analyzer with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as in clean rooms and make-up air units. Optional zero and span valves allow automatic, unattended...

  • TAPI - Model N500 - CAPS True NO2-NOX-NO Analyzer

    TAPI - Model N500 - CAPS True NO2-NOX-NO Analyzer

    The Model N500 CAPS NOX analyzer uses superior Cavity Attenuated Phase Shift (CAPS) Spectroscopy to measure True NO2, NOX, and NO gases. The instrument combines direct NO2 measurements with highly efficient gas phase titration (GPT) to convert and measure the NO gas component. An automatic baseline reference cycle accounts and compensates for any potential baseline drift due to varying environmental conditions. CAPS technology is inherently accurate...

  • TAPI - Model T500U - CAPS Trace-level NO2 Analyzer with NumaView™ Software

    TAPI - Model T500U - CAPS Trace-level NO2 Analyzer with NumaView™ Software

    The T500U CAPS NO2 Analyzer represents the next generation of criteria pollutant monitoring technology for the direct measurement of Nitrogen Dioxide (NO2) in air. The instrument utilizes a patented Cavity Attenuated Phase Shift (CAPS) technique to provide an extremely sensitive, fast and accurate NO2 measurement in a cost effective and low maintenance instrument package.

  • Carbon Compound Instruments

    Teledyne API's Carbon compound analyzers utilize Gas Filter Correlation combined with reliable NDIR (non-dispersed infrared) technology to produce very stable and accurate gas measurements. All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. All of our instruments are designed meet the rigorous demands of ambient air q

  • TAPI - Model T300U - Gas Filter Correlation CO Analyzer

    TAPI - Model T300U - Gas Filter Correlation CO Analyzer

    The Model T300U Trace-level CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network.  Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use as a US EPA compliance analyzer.

  • TAPI - Model T300M - Mid-Range Gas Filter Correlation CO Analyzer

    TAPI - Model T300M - Mid-Range Gas Filter Correlation CO Analyzer

    The Model T300M CO analyzer measures low to mid ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law.  Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO filled chamber and a chamber with no CO present.  The light path then travels through the sample cell, which has a folded path of 2.56 meters.

  • TAPI - Model T360 - Gas Filter Correlation CO2 Analyzer

    TAPI - Model T360 - Gas Filter Correlation CO2 Analyzer

    The Model T360 CO2 analyzer measures Carbon Dioxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law.  Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO2 filled chamber and a chamber with no CO2 present.  The light path then travels through the sample cell, which has a folded path...

  • TAPI - Model T360M - Mid-Range Gas Filter Correlation CO2 Analyzer

    TAPI - Model T360M - Mid-Range Gas Filter Correlation CO2 Analyzer

    Using a gas filter correlation wheel, the Model T360M Mid-Range CO2 Analyzer measures carbon dioxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This design produces excellent zero and span stability and high signal-to-noise ratio, allowing excellent performance over a wide concentration range, making this instrument an ideal choice for CO2 reporting requirements associated...

  • Oxygen Compound Instruments

    Teledyne API’s range of instruments for Oxygen compounds utilize advanced technology to produce some of the most accurate measurements available. All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. All of our instruments are designed meet the rigorous demands of ambient air quality, stack, or industrial process g

  • TAPI - Model T265 - Chemiluminescence O3 Analyzer

    TAPI - Model T265 - Chemiluminescence O3 Analyzer

    The Model T265 is the only commercially available US EPA Federal Reference Method for Ambient Ozone Monitoring according to the latest US EPA regulatory rules for O3. The instrument uses Chemiluminescence with Nitric Oxide (NO) as a reagent, making it safe, stable, and effective for all applications. The NO-CL method for Ozone has several advantages over the conventional UV absorption technology, including the avoidance of positive and...

  • TAPI - Model T802 - Paramagnetic O2 Analyzer with Optional CO2 Sensor

    TAPI - Model T802 - Paramagnetic O2 Analyzer with Optional CO2 Sensor

    The Model T802 O2 analyzer uses the proven paramagnetic measurement principle, coupled with state of the art microprocessor technology, to provide accurate and dependable measurements of Percent-Level O2. The Model T802 can also be equipped with an optional CO2 sensor, using the robust non-dispersed infrared (NDIR) measurement principle.

  • Gas Calibrators & Zero Air Generators

    All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. Teledyne API offers an extensive line of high quality gas calibrators and zero air generators to meet even the most demanding applications.

  • TAPI - Model T700 - Dynamic Dilution Calibrator

    TAPI - Model T700 - Dynamic Dilution Calibrator

    The Model T700 is a microprocessor based calibrator for precision gas analyzers.  Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

  • TAPI - Model T700U - Trace-Level Dilution Calibrator

    TAPI - Model T700U - Trace-Level Dilution Calibrator

    The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers.  Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero checks using up to 4 gas sources.

  • TAPI - Model T701 - Zero Air System

    TAPI - Model T701 - Zero Air System

    The T701 adds Modbus TCP/IP connectivity to the proven reliability and performance of our zero air systems. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature, and output pressure. Additionally, this digital access provides the ability to remotely disable the internal pump, allowing longer service intervals and less power consumption. The user can also remotely start instrument...

  • TAPI - Model T701H - High Performance Zero Air System

    TAPI - Model T701H - High Performance Zero Air System

    The T701H adds Modbus TCP/IP connectivity to the proven reliability and performance of our high purity zero air system. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature and output pressure.  Additionally, this digital access provides the ability to remotely disable the internal pump, allowing longer service intervals and less power consumption.  The user can also...

  • TAPI - Model T703 - Photometric Ozone Calibrator

    TAPI - Model T703 - Photometric Ozone Calibrator

    The Model T703 Photometric O3 calibrator combines an ozone generating device and photometer to provide a specified ozone concentration by volume for precision gas analyzers. The Model T703 can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 LPM.

  • TAPI - Model T703U - Trace-Level Photometric Ozone Calibrator

    TAPI - Model T703U - Trace-Level Photometric Ozone Calibrator

    The Model T703U is a microprocessor controlled ozone calibrator for precision gas analyzers.  Expanded ozone audit levels have created a need for precise ozone calibration well below the capabilities of standard calibrators.  The Model T703U is designed to meet the requirements of ultra-low ozone production.

  • TAPI - Model T750 - Portable Gas Calibrator

    TAPI - Model T750 - Portable Gas Calibrator

    The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use in the field.

  • TAPI - Model T750U - Trace Level Portable Gas Calibrator

    TAPI - Model T750U - Trace Level Portable Gas Calibrator

    The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750U is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use in the field.

  • TAPI - Model 751H - Portable Zero Air System

    TAPI - Model 751H - Portable Zero Air System

    The Model 751H is a portable, fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with sensitive analyzers in ambient background and trace level applications. Packaged in a wheeled, high density plastic case, the Model 751H provides ultra-high purity output with a warm-up time of 30 minutes.

  • TAPI - Model T753U - Portable Trace-Level O3 Calibrator

    TAPI - Model T753U - Portable Trace-Level O3 Calibrator

    The Model T753U is a portable, microprocessor based precision Calibrator for Ozone gas instruments and sensors. Using a sophisticated Ozone generation system, combined with a sensitive photometer and pneumatic design, the T753U produces stable and reliable concentrations of Ozone in a convenient and rugged package based on our popular T750U Portable Multigas Calibrator platform. The T753U is housed in a high-density, molded travel case which includes...

  • Particulate Instruments

    Teledyne API offers a combination of particulate matter measurements to meet a variety of data quality objectives for regulatory ambient air quality monitoring. All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support.

  • TAPI - Model T640 - Particulate Matter Mass Monitor

    TAPI - Model T640 - Particulate Matter Mass Monitor

    The Model T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. The T640 delivers 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of operation.

  • Process Ozone Instruments

    All of our instruments are designed meet the rigorous demands of ambient air quality, stack, or industrial process gas monitoring. Below is a list of a range of Teledyne API process ozone instruments.

  • TAPI - Model 430 - Compact Ozone Monitor

    TAPI - Model 430 - Compact Ozone Monitor

    Teledyne API, a recognized leader in Ozone measurements, is pleased to offer the Model 430 O3 Monitor. The 430 is a compact instrument that uses the proven UV-absorption principle. The small footprint and robust design make it ideal for a variety of applications where portability and accuracy are both necessary.

  • TAPI - Model 465M - Process Ozone Monitor

    TAPI - Model 465M - Process Ozone Monitor

    The Model 465M is a microprocessor based medium range ozone monitor for measuring process ozone concentrations in water treatment, food processing, and research applications. The design has been specifically optimized for applications requiring the measurement of ozone at near-ambient pressure such as water treatment contactor off-gas measurement. The Model 465M has been designed to give accurate and stable readings over long time periods with little...

  • TAPI - Model 465H - Process Ozone Monitor

    TAPI - Model 465H - Process Ozone Monitor

    The Model 465H is a microprocessor based high concentration ozone monitor for measuring ozone in process gas streams in water treatment, food processing, and research applications.  The 465H has been designed to give accurate and stable readings over long time periods with little or no maintenance or calibration.  The Model 465H is available in a NEMA 4X wall mount enclosure.

  • TAPI - Model 452 - Process Ozone Sensor

    TAPI - Model 452 - Process Ozone Sensor

    The Model 452 is a microprocessor based gas sensor for measuring high concentrations of ozone in oxygen or air with accuracy and dependability. The measurement principle is based on the absorption of UV light at 254nm. Readings are available in % by weight, or grams/Normal cubic meter. Temperature and pressure compensation up to 3 Bar Absolute is a standard feature.

  • TAPI - Model 454 - Process Ozone Monitor

    TAPI - Model 454 - Process Ozone Monitor

    The Model 454 is a microprocessor based gas monitor for measuring mid to high concentrations of ozone in oxygen or air. Available in a standard DIN panel mount configuration with a 4-digit LED display, the compact design provides ease of mounting and installation.

  • Dissolved Ozone Instruments

    For measuring dissolved ozone concentrations in water a microprocessor controlled instrument can be used for automatic and continuous measurement by means of an disinfectant sensor. All of our instruments are designed meet the rigorous demands of ambient air quality, stack, or industrial process gas monitoring.

  • TAPI - Model 470 - Dissolved Ozone Analyzer

    TAPI - Model 470 - Dissolved Ozone Analyzer

    The Model 470 is a state-of-the-art Dissolved Ozone Sensor designed for semiconductor Wet Bench tools and many other industrial processes. It provides continuous measurement of dissolved ozone in deionized water or sulfuric baths with concentrations above 150 mg/L. The Model 470 is “clean-ready” for high purity...

  • TAPI - Model W1 + 465L - Dissolved Ozone Analyzer

    TAPI - Model W1 + 465L - Dissolved Ozone Analyzer

    The Model W1, combined with a Model 465L Ozone Analyzer, continuously measures dissolved ozone concentrations in the liquid phase. It uses the stripping column method with advanced electronics design, to deliver highly accurate and stable readings of dissolved ozone. This dissolved ozone analyzer is typically used in measuring dissolved ozone in drinking water, wastewater and DI water applications in a wide range of industries.

  • Ozone Generators & Controllers

    Teledyne API's Ozone Generators are designed to produce ultra clean, high purity and very high concentration ozone that can be ideal for a wide range of process applications.

  • TAPI - Model AC Series - Air Cooled Ozone Generators

    TAPI - Model AC Series - Air Cooled Ozone Generators

    The AC series of ozone generators offers silent corona discharge technology in a very compact package. The ceramic-based, industrial grade ozone generators are capable of producing concentrations of ozone in excess of 200 g/Nm3 or 14% w/w. The AC series generators are available in a 19 inch rack-mount enclosure or a rugged, wall-mount enclosure designed for harsh and demanding industrial environments. For ease of use, each AC series ozone generator...

  • TAPI - Model OG-5000 Series - High Purity Water Cooled Ozone Generator

    TAPI - Model OG-5000 Series - High Purity Water Cooled Ozone Generator

    The OG-5000 series of ozone generators is designed to produce high concentrations of ultra clean ozone gas for use in semiconductor applications including CVD, ALD thin film, oxide growth and wet bench cleaning processes. The OG-5000 series has a compact, water cooled design that can be easily integrated with Teledyne API's ozone system controller, ozone leak detectors, ozone concentration monitors and ozone destructs. Its proven technology makes it...

  • TAPI - Model ODS Series - High Concentration High Purity Ozone Delivery System

    TAPI - Model ODS Series - High Concentration High Purity Ozone Delivery System

    The ODS series of High Concentration High Purity Ozone Gas Delivery Systems is designed for use in the most demanding semiconductor applications. This highly reliable ODS is ideal for applications requiring high concentration ozone at a wide range of flow rates. The ODS system is a complete turnkey solution that is custom configured to plug and play with most semiconductor tools. Its microprocessor based controller is designed to servo control the...

  • TAPI - Model Mini ODS - Compact High-Purity Ozone Delivery System

    TAPI - Model Mini ODS - Compact High-Purity Ozone Delivery System

    The Mini ODS is a compact, integrated ozone delivery system designed to produce ozone concentrations of 21% w/w, 320g/Nm3 for a wide range of wafer processing applications. It is a very compact yet complete ozone delivery system, including: a high purity ozone generator, high concentration ozone monitor, microprocessor based controller, and all the required regulators and pneumatics. The Mini ODS is expandable to support additional ozone generators...

  • TAPI - Model SCI-552 - Ozonator Controller

    TAPI - Model SCI-552 - Ozonator Controller

    The SCI-552 is a system controller for ozone delivery systems that provides electronic control interfaces for a number of typical system components, including: ozone generators, EV valves, mass flow controllers, back-pressure controllers, Teledyne API 452 ozone sensors, Teledyne API 470 dissolved ozone sensors, and a water chiller. The SCI-552 features hardware and software support for a number of system interlock functions. The SCI-552 provides...

  • Specialty Process Gas Monitors

  • TAPI - Model OPTI-Sense Series - Non-Dispersive Infrared (NDIR) Monitors

    TAPI - Model OPTI-Sense Series - Non-Dispersive Infrared (NDIR) Monitors

    The OPTI-Sense series of sensors is based on Non-Dispersive Infrared (NDIR) technology. They are designed to precisely measure the absorbance in the infrared spectrum of specialty gases typically found in semiconductor applications. They are very compact and designed with no moving parts, making the OPTI-Sense robust and ideal for continuous in-situ gas monitoring of semiconductor processes. Built-in diagnostics are included in the embedded software....

  • Catalytic Ozone Destructs

  • TAPI - Model CAT-O3 Series - Catalytic Ozone Destructs

    TAPI - Model CAT-O3 Series - Catalytic Ozone Destructs

    The CAT-O3 series of ozone destructs safely decompose high concentrations of ozone gas to sub-ppm levels that are below recommended ozone safety limits. The catalytic method of decomposition uses a metal oxide catalyst to passively convert the ozone to oxygen. The CAT-O3 series of ozone destructs are made from a welded stainless steel enclosure protected with a heat shield. They are carefully designed to meet the industry’s stringent safety...