Vesta - Single Stage Centrifugal Pumps

Operation Details

• Suction Flange : DN 50... DN 300
• Discharge Flange : DN 32... DN 250 mm
• Q (Flow) : 1700 m3/h (max.)
• H (Head) : 110 m (max.)
• Motor (Rotation Per Minute) : 1450 rpm. from 2900 rpm up to 3600 rpm.
• t (Operating Temperature) : from -10 °C (min.) to +140 °C (max.)
• Pd (Body Pressure Pmax) : 10-16 bars
• Direction of Rotation (Motor) : Clockwise (Right)

(Pmax: Suction Pressure + Pump Head in Closed Vlave)

(*) The pump material varies depending on te type of fluid, operating temperature and pressure.
For more information, please refer to our company.

• Centrifugal pumps with horizontal shaft, single-stage, end suction, closed impeller volute.
• Body sizes conform to TS EN 733 standards.
• Maintenance-free sealed type ball bearings are used in SNSP type of pumps.
• Shaft sealing is provided by soft seal, optionally and according to the type of the fluid pumped pumps with mechanical seals can also be manufacured.
• In addition to 29 models according to according to EN 733 standard, 25 pieces of non-standard models.
• The sizes of non-standard models may be different from the models of other manufacturers.
• Suction and discharge flanges conform to EN 1092-2 / PN 16.
• Bearing group, seal bearing, pump shaft and impeller can be dismantled without separating the volute off the piping installation thanks to design that can be dismantled from the back.
• All of the impellers have been dynamically balanced according to ISO 1940 class 6.3.
• Axial force has been balanced by back wear ring balancing holes system.

• Pump Name : SNSP
• Discarge Flange DN (mm) : 32
• Impeller Nominal Diameter (mm) : 160