- Home
- Companies
- UAB "VILTRUS ELECTRONICS"
- Products
- Viltrus - Model MX-5 - Data Logger
Viltrus - Model MX-5 -Data Logger
The MX-5 data logger allows reading of Modbus and M-Bus devices, and send the data to remote users / server through Modbus GPRS modem or Ethernet. It also provides SMS sending services for alarm events. Data logger can read Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr and other meters (like exotic meters / industrial meters).
- Possibility to choose interfaces: M-Bus, RS232, RS485, Current Loop, Data/Req, USB, GSM/GPRS, Ethernet
- Reading data from any kind of meters (water, electricity, heat, gas, cooling ...) and controllers
- Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, MQTT, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 and transparent
- Independent data log with real time stamp (Real Time Clock)
- Remote communication and updates through GSM/GPRS or Ethernet
- Galvanically isolated interfaces and power supply
- SMS sending for alarm events
- Additional special transparent protocol data transfer
- Power supply for external powering of meters
- Memory expansion: up to 8 GB using micro SD card
- MQTT internet of things (IoT) protocol
Data Logger MX-5 is dedicated for real time logging and analyzing of data. Using GPRS/GSM or Ethernet, logger sends data to remote users / server. MX-5 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for telemetry/monitoring, control and smart metering.
- Water metering
- Sensor monitoring
- Electricity metering
- Renewable energy monitoring
- Gas metering
- Industrial metering and control
- Heat substation metering
- Agro monitoring
- Smart house
- Commercial metering
If client needs custom made application or special functions, our R&D department ready to help. We can adjust our devices, include special protocols or interfaces to meet client application`s needs. Also we are ready to adjust our device for working with various meters, flow meters (even exotic ones). If you are not sure if our device can satisfy your needs, feel free to contact us anytime.
MX-5 can read: Kamstrup, Sensus, Danfoss, L+G, Itron, Diehl, Apataor and other manufacturer`s meters. Also MX-5 can read and controll other controllers, like Danfoss ECL 300.
Application examples
Below indicated few samples how MX-5 collects the data from meters / sensors and controllers and sends the data to local or remote users using Modbus protocol via GPRS / GSM or Ethernet. There is so many ways to use our MX-5. Starting from smart metering, heating substation metering, data acquisition from temperature, pressure sensors, data acquisition from weather stations and sensors, agro monitoring, chemical monitoring and telemetry, to smart house telemetry, and scientific device monitoring and telemetry.
- CPU ARM7
- Flash archive storage up to 8 MB, independent data storage without power about 5 years
- RS232 (4 ports) distance up to 15 m, speed up to 19,2Kbit/s
- RS485 (3 ports) distance up to 1,2 km, max 32 transivers, speed up to 19.2 Kbits/s
- M-Bus (2 ports) up to 16 M-Bus devices (up to 8 M-Bus devices for each M-bus port)
- Data/Req (2 ports) (KAMSTRUP) data transfer interface
- Current Loop (2 ports) 25-27V, 14-20mA, up to 6km, speed up to 19,2Kbit/s
- GSM/GPRS 4 band 850/900/1800/1900 MHz
- Ethernet 10/100 Mbps, RJ45, distance up to 100 m
- SD card support micro SD card up to 8 GB
- USB type B, ver. 2,0
- Protocols Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:2000, DynDNS, FTP server, FTP client, DNS client
- Power supply 9-36 VDC
- Over-voltage protection >1000V
- Capacity 300mA max
- Power for external devices 3,7/5/6/8/10 VDC (20mA)
- Dimensions 147x128x50 mm
- Weight 400 g
- Mounting type on DIN rail
- Protection type IP20
- Operating temperature -25 to +60oC
- Real time clock Yes
- M-Bus auto setup Yes
- Certifications CE, Rohs
- Warranty period 2 years