Only show results in Massachusetts? Ok

Soil & Groundwater Applications

  • Premium

    Oxygen monitoring from aerobic and anaerobic for biodegradation tests

    Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.

    By Respirometer Systems and Applications, LLC based in Fayetteville, ARKANSAS (USA).

  • Premium

    Mercury monitoring for aircraft research measurement

    An examination of the literature shows that the Tekran 2537 is the choice for measurements of mercury aboard research aircraft. Several research groups in Europe and North America have used the Tekran 2537 on an aircraft platform for point source plume studies, free troposphere speciation characterization, vertical profiles, characterizing emission source regions and even the stratosphere (http://www.caribic-atmospheric.com/instrum/hg.html). Normally, the Tekran 2537 requires simple modifications for aircraft...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Gas detectors for consultancy industry

    Our instruments are capable of detecting VOC at low levels and can log data with ease. They can also be used with incredibly humid soil samples so the effects of moisture are massively reduced. Once logged, the data can be extracted at a later date which can then be built into a report. Producing a report has never been easier with our intuitive data management software package.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Boroscope for Remote Visual Inspections in NDT

    Boroscopes (aka Borescopes) are useful and valuable NDT tools in any industry where remote visual inspections are essential. Traditional, non-video techniques for tracking an object, do not work as well within the environment a boroscope typically encounters. Using these devices you can get clear visual access to many hard-to-reach places without a complete tear-down of the components. There are two main types of boroscopes - rigid and flexible. You can get flexible ones with two way and four way tip articulation,...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Radon Monitoring for Radon Calibration

    Radon monitoring for Radon calibration labs, research and expertise, specific applications (seismic survey, and so on)

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Visual inspection solutions for the borescope for engine inspection

    Visual inspections of engines and other hard to visualize places are an important part of ongoing automotive maintenance. Rigid and flexible borescopes are a great way to visually inspect engines without having to dismantle the engine block, as they allow you to remotely visualize dark, small, and hard to reach places. Routine inspection with a borescope will allow you identify problem areas and to replace or repair parts before they are causing problem. Flexible borescopes can also be used to track through parts...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Radon Monitoring Equipment for Radon Risk Assessment

    Radon monitoring equipment for Radon risk assessment in NORM and nuclear industries (mining, nuclear waste disposals, oil and gas industry, and so on).

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Visual inspection solutions for the SeeSnake alternative

    At the present moment products from RIDGIT are quite popular on the market. People like them for their ruggedness, good design, and wide selection of options. Here at Fiberscope.net we offer a very good selection of different devices for remote visual inspections. In most of cases our cameras have comparable quality, with the same or even better technical characteristics as SeeSnake tools, but at more competitive prices.

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Visual inspection solutions for the borescope for casting inspections

    Casting is a manufacturing process that is used to make countless metal objects every day. Many of these metal pieces are extremely intricate and used as parts to make up larger complex machines, systems or units, such as engines, turbines, medical equipment etc. Inspecting these casting, before and during use is beneficial to maintaining the systems they make up. A rigid or flexible borescope is often the easiest, most efficient and fastest way to inspect the finer details inside of metal castings.

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Visual inspection solutions for the duct HVAC inspections

    Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Unattended Ground Sensor system for Civilian Areas surveillance and protection

    Critical infrastructure requires installation of security applications inside and outside the facility perimeter. The Flexnet networked sensor platform offers a flexible and quickly deployable 24/7 protection solution using a combination of intelligent and autonomous sensors and cameras.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Industrial Meshes for Sand Control Screens

    Modern petroleum exploration technologies operate with filtration technologies that are actually put through in the well. As a basic component of these sand control screens, SolidWEAVE stainless steel mesh is used for the filtration because they meet the most extreme requirements.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Water monitoring equipment for aquifer characterization industry

    Our durable water level sensors help you collect high quality, meaningful data. Increase efficiency and cost-effectiveness of your pumping and slug tests, reducing field time with longer lasting equipment. In-Situ’s Virtual HERMIT Aquifer Testing Kit lets you monitor an entire well field with one system. Simultaneously configure, start, view, step, or stop all connected data loggers, or set up equipment to run tests at a pre-set time. Aquifer testing has never been so easy, simplifying data collection even...

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Gas analysis & monitoring systems for greenhouse gases analysis

    The rising levels of manmade greenhouse gases (GHGs) in the atmosphere and their resulting impact on climate is now one of the single biggest technological and environmental challenges facing the world. This makes intensified monitoring of these gases more critical than ever in order to better quantify the role of the numerous natural and manmade sources, sinks and buffers involved in the cycles of GHGs. It also enables us to objectively audit GHG fluxes at the factory, city, country and continental level. Such...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Tunnel solutions for the gaseous pollutants

    The TunnelTech 200 series are primarily gas monitors with optional Visibility capability. Most use Infra-red absorption technology to monitor gaseous pollutants and those with a visibility channel use optical attenuation for that application. All TunnelTech 200 analysers except the TunnelTech 205 use the same rugged corrosion resistant enclosures and have an optional Data Display unit. As there is only one moving part so reliability levels are very high and maintenance levels very low.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Cultural Heritage

    From the experience gained by supplying systems to the immense Italian artistic heritage and from the technical collaborations with the most prestigious research institutes in the sector, LSI LASTEM is able to propose complete solutions for the monitoring of conservation, restoration, movement and fruition of the works art. Museums, places of restoration and discovery, museum display cases, warehouses, archaeological sites and caves must be monitored for their preventive conservation. The dynamics of the deteriora...

    By LSI-LASTEM srl based in Milano, ITALY.

  • Unmanned Aerial System for Surveying and Spatial Sciences

    The purpose of surveying has remained somewhat the same over time: establishing boundaries, creating maps for navigation, and developing land. However, while the purposes remain constant, the survey tools used over time have progressed alongside human technology, and with each advancement, they improve the accuracy and speed at which surveying can be done. In recent years, the Geomatics industry has been captivated by the possibilities of working with unmanned aerial systems (UAS). Survey companies are actively...

    By Infinite Jib Inc based in Shomberg, ONTARIO (CANADA).

  • Online benzene and BTEX analyzers solutions for emission of toxic hydrocarbons sector

    Gas chromatograph for monitoring of emissions from industry: toxic hydrocarbons in air, water and soil.

    By Synspec BV based in Groningen, NETHERLANDS.

  • Multi-Sensor for Internet of Everything [IoE]

    Moving towards multi-sensor platforms that incorporate several sensing elements motivates many companies and organizations to seek for solutions in the fields of Internet of Things (IoT) and Machine-to-Machine (M2M). All these "things" having Internet wireless connection, need an available and reliable source of energy to operate. They are not working continuously.

    By Sol Chip Ltd. based in Haifa, ISRAEL.

  • Automated System for High Throughput PCR Setup

    Modern genomics labs are looking for high-throughput, quality-data workstations to perform PCR reactions at a reduced cost. PCR reaction setup is a tedious and time consuming process as it requires mixing multiple reagents in specific ratios to achieve the proper master mix for amplification. Moreover, the exact volumes of the reagents and buffers depend upon the total number of samples to be amplified and the desired final concentration of sample DNA. Automation of such procedures eliminates both human error and...

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you