Only show results available in Virginia? Ok

Hydrocarbon Contamination Applications

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Monitoring of hydrocarbons in bilge water

    The Situation

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    MPP water purification systems for groundwater remediation application

    Toxic hydrocarbons in groundwater can be found dissolved in water diffused over the area. At higher concentrations they can be present as DNAPLs (dense non-aqueous-phase liquids) or LNAPLS (light non-aqueous-phase liquids) creating an enduring source of toxic contaminant supply to the water phase.

  • Premium

    Product and services for industrial - refineres industry

    For industrial customers, we offer cost-effective and environmentally attractive alternatives to oxidize, precipitate, segregate and remove unwanted pollutants, contaminants and by-products from waste streams and industrial processes. Whether using our time-proven CAIROX®, AQUOX®, and LIQUOX® permanganate-based products, our manganese based CARULITE® catalyst, or any of our other newly developed technologies, our long history and unmatched experience and environmentally friendly expertise provides customer specific solutions to many diverse industries.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Oil vapour removal for the manufacturing industry

    The mist eliminator prevents oil mist from contaminating air or soil, helping facilities to comply with environmental regulations. It also makes for a cleaner safer work environment by eliminating oil residue built-up on engine room floors, enclosure and stairwells, while improving indoor/outdoor air quality and reducing fire hazards. 

  • Premium

    Several waste gas streams: Highly contaminated oxygen-free waste gas,|and medium waste gas stream

    Explosive oxygen-free waste gases are disposed of and contribute to the oxidation process of the contaminants.

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for oil in water/soil

    Overview

    Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste streams.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Treatment of industrial wastewater with high oil content

    This type of waste water is characterised by high oil and grease loads from hydrocarbons.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Reverse Osmosis - Pretreatment and Clarification - Wils ElectroWaveTM Conditioning

    Wilsa ElectorWaveTM Conditioning can be used to pretreat water for reverse osmosis. The Wilsa Effect breaks emulsions, enhances separation to remove hydrocarbons and clarify solids before entering RO treatment. The effect also substantially lowers the viscosity of the water which allows it to pass through membranes with less effort.

    By Hudson Industries based in Warren, OHIO (USA).

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Pure drinking water solutions for organic food processing industry

    You go all out to produce only the best culinary creations, so how pure is your water? Water purity can have a huge impact on the flavor, aroma, visual appearance, healthfulness and even shelf life of your foods. Many beverages such as coffee and teas can be up to 99% water, so is it any wonder that water purity makes it taste so much better? When made with our pure water, alcoholic drinks don’t have the oil slick floating on the surface. Sushi masters in Japan love how our water makes sushi rice ‘pop’ in their mouth. When you boil pasta you will notice the lack of foam in the water. Ice tea stays good for weeks instead of days. Soup not only tastes better, but it’s healthier because it’s free of the contaminants present in your tap water. This is how food is supposed to taste!

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Warren, OHIO (USA).

  • Rugged Mobile Technology for Contaminated Sites

    These handhelds use precise GPS information to speed cleanup of oil spill sites.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • ASTM Color (0-7) #3070

    ASTM color is an important product quality measurement for many refinery and petrochemical processes. The purpose of this application note is to determine ASTM (D1500) color with the ClearView db fiber optic photometer for real-time ASTM color measurement from 0-7. Quantify yellowness for product quality measurement for many refinery and petrochemical processes. Get results in real-time (seconds). Use for ASTM and other parameters in complex streams. Detect potential cross-over contamination in fill or supply lines in real-time. Gain significant improvements in process control. Guided Wave's in-process NIR analyzer will determine ASTM (D1500) color in real time helping operators improve process control 24/7.

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Determine Saybolt Color #3067

    Accurate online saybolt measurements from zero to +36. - Quantify yellowness for manufacturing control and product uniformity. - Ensure your product meets customer expectations - Detect potential cross-over contamination in fill or supply lines in real-time - Take the guess work our of product appearance standards - Application Note #3067

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you