Monitoring Wells Applications

18 Results found
Only show results in Virginia?
OK
  • Category: Soil & Groundwater ×

  • Subcategory: Monitoring Wells ×

Monitoring Well Inspection With 3/4-inch Video Camera

by Allegheny Instruments, Inc.     based in Williamsville, VIRGINIA (USA)

Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

Data analysis and visualization tools for monitoring well decommissioning

by C Tech Development Corporation     based in Henderson, NEVADA (USA)

Contaminated groundwater sites worldwide are engaged in regular sampling of monitoring wells at a typical cost of $1,500 per well-sampling event. On most sites, many wells are redundant or geostatistically insignificant and can be decommissioned.
EVS-PRO and MVS`s Well Decommission module analyses all available data and quantifies the impact on site assessment quality associated with removing each well. The impact of removing a well is quantified in terms of its impact on the geostatistical plume extent.
During remediation plumes are shrinking and may drift. This can necessitate decommissioning of some wells and adding new wells. C Tech`s well decommissioning and DrillGuide© technology provide the tools to properly monitor and guide the remediation efforts at the lowest possible cost.

Continuous Monitoring of Wastewater

by SORBISENSE     based in Tjele, DENMARK

The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

CCTV surveillance & Access control

by Scantronic Africa Ltd     based in Nairobi, KENYA

Residential and office premises can be monitored by CCTV systems ans well as restriction in entry to unauthorized persons/vehicles etc

Contaminated Soils with Diesel Fuel and Heating Oils

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

Sampling and drilling equipments for the mining industry

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

Flow and analysis measurement for food industry

by NIVUS GmbH     based in Eppingen, GERMANY

Application: Pipe with 0.3 m diameter. Part filled. Pipe made of HDPE. Shift production. Heavy flow fluctuation. Low sedimentation.

Offshore Oil Drilling and Production Project

by Boode Waterwell Systems     based in Zevenhuizen, NETHERLANDS

PROJECT OVERVIEW: The re-lining of 12 seawater supply wells to a depth of 45 metres with Boode Select PVC screen and casing. The supply wells support an offshore oil drilling and production platform and were re-lined following the failure of existing stainless steel screen and casing due to sand ingress and corrosion.

Casting Inspection

by Geomorph Instruments     based in Piraeus, GREECE

Non destructive test methods are highly effective in the detection of casting defects which are not always visible on the surface. X-ray is a well-known tool for casting quality control. Digital radiography technology takes these tests to the next level. Excellent resolution and dynamic range enable NDT technicians to see the smallest bubbles and the tiniest of cracks. Non destructive test methods employing portable Digital Radiography systems can serve as an efficient solution in facilities that require both laboratory and onsite inspection.

Video Inspection of Monitoring Wells

by Allegheny Instruments, Inc.     based in Monterey, VIRGINIA (USA)

GeoVISION borehole video camera systems are used to visually inspect monitoring wells.

Deep well level measurement for ground water industry

by NIVUS GmbH     based in Eppingen, GERMANY

Application: Deep drilling 150 m. Bore diameter 30 mm.

Industrial Weighing - Counting

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

When verifying inventory, packing parts in containers, or confirming production quantities, every part is important. METTLER TOLEDO is the leader in precision parts counting technology ensuring that only the right number of parts are delivered to you or your customer. Our super-precise solutions such as BBK4xx counting scales or the IND690count terminal offer unprecedented counting accuracy.

Emissions Monitoring for Sulphuric Acid Production

by Opsis AB     based in Furulund, SWEDEN

Opsis offers complete system packages for on-line measurements in sulphuric acid plants. A system may be used in order to increase plant efficiency as well as monitoring the emissions.

Remote level monitoring

by Banner Engineering Corp.     based in Diegem, BELGIUM

Leachate level control is a primary function in landfills. Although different types of pumps are used, all pumps need to be installed with a totalizing counter mounted at the top of the well head to monitor the pump cycles and to calculate the total volume of leachate removed from the well. Instead of manually monitoring the leachate level and collecting the pump count data, use FlexPower™ Counter Nodes to wirelessly send data from the pumps back to a central control location to save time and eliminate errors.

Microbial testing in food & beverage industry

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water treatment and distribution systems used in the food and beverage industry, and aids with disinfection practices and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in food & beverage water management!

Real-time In-situ Effluent Monitoring

by Chelsea Technologies Group     based in West Molesey, UNITED KINGDOM

The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in air. We investigated the performance of the LC-MS and LC-MS-MS methods in the analysis of isocyanates using the new ASSET™ EZ4-NCO Dry Sampler. We found that the analytical method can successfully reach the quantitation limit for most isocyanates of 5 ng/mL in the final sample when LC-MS-MS analysis was used and the quantitation limit of 10 ng/mL when LC-MS analysis was used. All 11 compounds were well-resolved chromatographically using a 15 cm Ascentis Express C18 column.

Need help finding the right suppliers?

Let the XPRTs do the work for you