Only show results available in Virginia? Ok

Remediation Systems Applications

  • US Peroxide Total Chemical Management

    US Peroxide (USP) provides turn-key chemical management and field service programs to engineering companies and remediation technology applicators using In-Situ Chemical Oxidation (ISCO) or other technologies requiring chemical storage and handling. USP programs have proven to be cost effective and highly efficient using custom-designed chemical handling and management programs deployed by highly skilled field service teams. Advantages USP can supply a wide range of chemicals such as hydrogen peroxide, ferrous sulfate, sodium persulfate, acids and others commonly used for ISCO or other remediation technologies. USP works with remediation companies to develop a cost effective, logistically optimized and reliable chemical management program based on project specific chemicals, quantities, usage rates and other project constraints. We can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Thermal Remediation Inside & Near Buildings & Infrastructure

    In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Remedial Construction for Airports and Terminals

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Remedial Construction for Rail Systems

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    MPP water purification systems for groundwater remediation application

    Toxic hydrocarbons in groundwater can be found dissolved in water diffused over the area. At higher concentrations they can be present as DNAPLs (dense non-aqueous-phase liquids) or LNAPLS (light non-aqueous-phase liquids) creating an enduring source of toxic contaminant supply to the water phase.

    By VWT Techno Center Netherlands B.V. - MPP Systems based in Ede, NETHERLANDS.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Equipment and Suit Decontamination for Site Remediation

    By Fast-ACT based in Fort Myers, FLORIDA (USA).

  • Air pollution control for soil remediation

    Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Remedial Construction for Ports

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Brownfield Remediation

    Maximize ROI and Market Value of Brownfields Properties

    TerraTherm provides rapid, thorough, and predictable remediation of Brownfields property. Our in situ thermal processes can ensure rapid closure, avoid delays, eliminate uncertainty, avoid excavation, and optimize property value. In situ thermal remediation is a reliable, lower risk, and less disruptive way to achieve your remediation goals.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Demolition Work

    Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work is completed.

    By EmiControls based in Bolzano, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you