Only show results in Virginia? Ok

Water Wells Applications

  • Tunnels

    The geotextile performs two primary functions when used in the construction of tunnels:- 1. Protection of the linear from abrasion and puncture by protrusions from the base surface of the tunnel well. 2.Drainage of water seeping through the rock and sprayed concrete layer. The in-plane oermeability of the geotextile enables the water to flow to a subsurface drainage collection system. where it is directed awa from the tunne

    By Manas Geo Tech India Pvt. Ltd. based in New Delhi, INDIA.

  • CCTV surveillance & Access control

    Residential and office premises can be monitored by CCTV systems ans well as restriction in entry to unauthorized persons/vehicles etc

    By Scantronic Africa Ltd based in Nairobi, KENYA.

  • Pulsair`s industrial mixers for asphalt industry

    Pulsair Systems is the leading provider of industrial pneumatic mixing and air agitation equipment for the asphalt industry. Our industrial asphalt tank mixing system are efficient, cost-effective and well suited for mixing sealcoat, asphalt emulsions, coal tar and other asphalt based sealers.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Monitoring Well Inspection With 3/4-inch Video Camera

    Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Data analysis and visualization tools for monitoring well decommissioning

    Contaminated groundwater sites worldwide are engaged in regular sampling of monitoring wells at a typical cost of $1,500 per well-sampling event. On most sites, many wells are redundant or geostatistically insignificant and can be decommissioned.
    EVS-PRO and MVS`s Well Decommission module analyses all available data and quantifies the impact on site assessment quality associated with removing each well. The impact of removing a well is quantified in terms of its impact on the geostatistical plume extent.
    During remediation plumes are shrinking and may drift. This can necessitate decommissioning of some wells and adding new wells. C Tech`s well decommissioning and DrillGuide© technology provide the tools to properly monitor and guide the remediation efforts at the lowest possible cost.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Sialex Private Household Application

    Our products are installed on many industrial areas and in the private household. We have also experience with fluids other than water, which will receive more attention in the future. In the home “Scaling” and “Corrosion” of water pipes and appliances is not simply an inconvenience it is an expensive problem (replacing pipes and equipment (washing machines, showers, boilers etc.).

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Vacuum excavation solutions for diamond saw slurry

    Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Investment services for infrastructure industry

    McHewel’s Infrastructure Practice works closely with clients to meet their most pressing needs across transport, energy, social infrastructure (e.g. healthcare and education), and real estate. We are a global network of experts who help deliver practical and cost-effective solutions. In the last 3 years we have executed more than 300 client engagements serving 100 different clients in emerging as well as developed markets across the infrastructure industry.

    By McHewel Investment Group based in Toronto, ONTARIO (CANADA).

  • Wireless industrial I/O applications for wastewater industries

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these example wireless applications for wastewater, landfills, and biomass processes.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Residential and Commercial, Underground Thermal Energy Storage

    PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Water Treatment for Personal Care / Water Treatment for Cosmetics

    B & V Effluent Services has been helping the cosmetics and personal care industry with their waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip companies within this industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Civil engineering applications

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The harder the conditions are, the greater Watermaster`s advantages compared to other technologies. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Mandatory GHG Reporting

    Our Impacts can help companies listed on the London Stock exchange to comply with their new Mandatory Carbon Reporting duties, laid out in The Companies Act 2006 (Strategic Report and Directors’ Report) Regulations 2013, which requires around 1,100 of the UK’s largest listed companies to report their greenhouse gas emissions every year.

    By Ecometrica based in London, UNITED KINGDOM.

  • Environmental Solutions for Airlines

    Governments the world over are now working on regulations that will require Airlines to monitor and manage their GHG emissions. The UK is leading this effort with requirements for 2010 - 2012, and other countries are soon to follow. Implementation of GHGWARE and the VisionMonitor Real-Time Environmental Performance Suite allows proactive GHG emissions and compliance data management in real-time as well as predictive modeling tools for planning of future regulatory compliance.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Premium

    Water oxidation for private an public drinking water

    Carus permanganates have been used in private and public drinking water applications for more than 40 years. Municipal drinking water plants use CAIROX® and AQUOX® potassium permanganates, and CARUSOL® liquid permanganate in both ground water (well) and surface water for Pretreatment, Pre-oxidation and Organics Removal. Today, municipal water providers face increased challenges as more stringent regulations are enacted and public awareness regarding water quality becomes heightened.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Industrial shredders system for plastic shredding sector

    Plastic is a versatile material. Characteristics range from tough polymer structures to extra-firm high-tech materials. Efficient size reduction requires experience and know-how. We are able to customise our machine designs to be suit your requirements, for example; process configuration, footprint and throughput, thereby creating the optimum solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you