Only show results in Michigan? Ok

Waste & Recycling Applications

  • Premium

    Sludge reduction for industrial wastewater treatment

    The wide range of Pieralisi decanters is in fact successfully used by over 15,000 customers around the world for the volume reduction of biological and physical/chemical sludge of both Municipal and Industrial origin.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment and mixing equipment for Industrial water

    In wastewater treatment, the aeration system is often the largest energy consumer. It seems the age-old answer for every problem was to increase horsepower and add more aeration. When you analyze aeration, only 20% to 50% of the energy consumed is needed for production of dissolved oxygen (DO) for processing BOD and nitrifying bacteria. The remaining energy is used just for the mixing effect.

    By Medora Corporation based in Dickinson, NORTH DAKOTA (USA).

  • Premium

    Electrochemical solutions and water technologies for marine industry

    In the marine market, ocean-going vessels and fresh water or inner coastal boats require water treatment technologies to meet drinking water, process water and wastewater requirements. Offshore oil and gas operations and ocean-going vessels generate sewage that can contain contaminants which have a detrimental effect on water quality and the overall marine environment. As a result, marine sewage treatment systems are required to lessen the environmental impact. The MEPC.227(64) effluent standards, adopted by the...

  • Premium

    UV fluorescence technology for Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Municipal wastewater solutions for combined sewer overflow industry

    WesTech offers combined sewer overflow (CSO) equipment, which greatly helps communities where excessive rain events cause the sewer system to be overwhelmed. WesTech provides multiple solutions that will optimize your collection and retention facilities and reduce the contaminants released during CSO events.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Industrial water and wastewater solution for the marine parks sector

    Large marine parks handle millions of gallons of freshwater and salt water. Effective fluid handling and filtration is required and aquariums require corrosion-resistant pumps and valves that are clean, safe and efficient.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Wastewater treatment management for domestic waste water reuse industry

    Increasing population growth and urbanization rates across the world are placing increasing stress on clean water resources and making it more imperative to treat domestic waste water. Additionally, rising water costs due to increasing water scarcity and implementation of tighter environmental regulations to reduce waste water discharge limits are requiring municipal domestic wastewater treatment operators to seek innovative and efficient domestic wastewater treatment solutions. Genesis Water Technologies...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Ceramic membranes and pressure vessels for environmental protection / waste water technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Mineral sorting for the mineral industry

    The processing of minerals places a high demand on the sorting process. REDWAVE offers flexible sorting systems which are highly effective in separating impurities from valuable minerals. The separation occurs on the basis of colour, shape, structure or material property. REDWAVE guarantees high throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Geosynthetic Lining for Canals, Stormwater Impoundments and Wetlands

    Composite laminated GCLs offer puncture and tensile strengths beyond conventional geomembranes. These GCLs offer the low permeability of a geomembrane combined with the high swelling and self healing characteristics of a traditional GCL. With their ease of installation, cost-effectiveness and resilience to physical and climate issues, GCLs are often specified in canals, stormwater impoundments or wetlands to control seepage and conserve valuable water where native soils are too permeable.

    By CETCO based in Wallasey, UNITED KINGDOM.

  • Premium

    Storm water flushing for sewage wastewater treatment

    With the increased use of storm water retention tanks, the need arises to routinely clean the tanks. Regular cleaning maintains combined sewer overflow (CSO) capacity and prevents septicity and odor problems associated with stagnant effluent. PWTech® Tipping Buckets provide a simple yet robust solution for flushing retention tanks.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA).

  • Premium

    Sludge removal for sedimentation tanks

    VA Teknik is a Swedish Company whose name is well known on the Water & Waste Water Treatment market. VA Teknik are specialized within sludge scraping and other equipment for sludge removal at Water and Waste Water Treatment Plants. - Non Metallic Chain & Flight scrapers for Clarifiers, API and DAF. - Trickling filter solutions, media and Rotating Distributors. VA Teknik has delivered equipment all over the world to more than 4000 applications during the last 40 years. VA Teknik are certified according to...

    By Hydria Water AB based in BorĂ¥s, SWEDEN.

  • Premium

    Hose and tube pumps for Water and wastewater industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic® or Kalkmilch), caustic soda, powder activated carbon and polymers. Sludge transfer. Filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Electrochemical solutions and water technologies for professional cleaning

    Reducing the risk of infection transmission. In a world where high-density living in urban areas is increasing, and healthcare and the spreading of pandemics are among top concerns, the role of the cleaning industry is of great importance, though often underestimated.

  • Premium

    Industrial water and wastewater solution for the aquariums sector

    Large public aquariums handle millions of gallons of freshwater and salt water and house large aquatic species such as whales, sharks and dolphins. Effective fluid handling and filtration is required and aquariums require corrosion-resistant pumps and valves that are clean, safe and efficient.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Sustainable Plant Solutions for the Recycling of Water and Resources

    Water is one of the most important raw materials for industrial production. For this reason, processes are now used in water treatment that not only produce the required water quality, but also allow for recycling. The treated water can either be fed back into the process, or reused for other purposes. Water recycling plants lead to a significant reduction in operational costs for production.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you