Only show results in Virginia? Ok

Glass Recycling Applications

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L Company Ultrameter II™ 4P or 6P, a suitable container, and a mixture of Dl (deionized) water and alcohol.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Thermal oxidation for the glass industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Products for aggregates and glass recycling

    Mini mobile jaw crushers, diesel or electric for crushing stone, concrete, glass, ceramics, etc.

    By Guidetti Recycling S.r.l. based in Renazzo (FE), ITALY.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) and Auto fluff or just fluff.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Glass sorting for the glass recycling industry

    Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colors.

    By REDWAVE - a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Waste recovery for glass manufacturing

    Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Shredding and baling for the glass/rock and mineral wool industry

    Complete waste handling installations containing conveyors,shredders and specialized balers for waste handling of waste matts of glasswool. Large size straight from production lines.

    By Valvan Baling Systems NV based in Menen, BELGIUM.

  • Premium

    Application package FLUXANA Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package glass can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Crushing of glass and glass fibers with Mercodor crushing systems

    The crushing of glass and glass fibers serves, on the one hand, for volume reduction purposes and, on the other hand, for recycling of raw materials. The recycling of glass fibers, glass fiber insulating mats, glass tubes as well as laminated glass helps for bettering our environment. The Mercodor crushers are best suitable for the crushing of glass fibers, glass fiber insulating mats, glass tubes as well as laminated glass.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding and crushing systems for crushing bottles

    Mercodor crushing plants for crushing bottles are widely used. Firstly you contribute to reducing the volume of waste, but you also make a major contribution by economically crushing glass and PET bottles.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Application package FLUXANA RAW- Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package raw materials can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 6x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Shredding of glass with liquids with Mercodor shredding systems

    Mercodor shredding machine for crushing glass with liquids are used for reducing the volume of waste. The crushing of glass continues to make a significant contribution to the economic recovery of raw materials. Mercodor special engineering is your partner for professional shredding of glass with liquids.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    EDXRF spectrometers for plastic, polymers & rubber industry

    Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into plaques.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Hydrocyclones for pulp and paper applications

    Krebs high density stock cleaners (cyclones) are designed to withstand corrosion, high temperatures, and heavy loads of abrasive materials such as glass, staples, and wire.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you