Parts cleaning in the automotive industry; In view of the growing variety, shorter delivery times and continuously rising output volumes, short cycle times ensure both manufacturers and suppliers in the automotive industry remain competitive on the international market while safeguarding high parts quality and manufacturing precision at the same time.
We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic...
Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to hazards.
Problem: Ceramic shells are typically chipped away from investment castings, a process that is not only tedious and labor-intensive, but can damage the casting inside. The more intricate the casting shape, the bigger the problem.
Problem: Highway and runway markings must be removed and repainted regularly, and runways face the additional problem of rubber build-up every time an airplane lands. Grinding it away can damage the pavement, and sandblasting generates a lot of dust.
Problem: A burr left on a metal part – or flash on a molded one – not only sends a message of poor quality, it can cause serious problems down the road. If it breaks off later inside a fuel injector or other critical part, it can cause clogs or damage that can affect performance.
Problem: The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the noise and the dust.
Problem: Heat exchanger systems lose efficiency when deposits build up in, and on, tube bundles. High-pressure water jetting cleans both I.D. and O.D. very effectively, but manual methods clean a limited area at a time and expose operators to strain and risk.