Industrial Waste Applications

84 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Industrial Waste ×

Handling hospital waste and laundry

by Envac AB     based in Stockholm, SWEDEN

Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

Waste shredding for the landfill industry

by Metso Recycling Equipment     based in Duesseldorf, GERMANY

However enormous a landfill site first appears, it is surprising how quickly - and how ineffectively - it can become full. Regardless of how bulky, resilient or abrasive the waste may be, effective shredding makes best use of the space available by considerably reducing the volume of waste. Metso shredder equipment includes three sizes of mobile shredders with a variety of mounts, all capable of providing a range of grain sizes. This makes it easy to select the most efficient and cost effective shredding solution for a wide variety of landfills.

Waste shredding for the waste-to-energy industry

by Metso Recycling Equipment     based in Duesseldorf, GERMANY

With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

Environmental technology for chilling - crystallisation industry

by Körting Hannover AG     based in Hannover, GERMANY

For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

Solutions for recovering metals

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

The mining industry relies on Calgon Carbon’s Granular Activated Carbon (GAC) to recover gold and other precious metals. Calgon Carbon’s ISEP® Technology is used to recover precious, rare earth and base metals, uranium, copper, nickel and zinc from ore, waste and reclaim streams. Our high-quality activated carbons have been developed and successfully proven to maximize efficiency by reducing the loss of precious metals and the consumption of carbon in three precious metal extraction techniques: Carbon-in-Leach (CIL), Carbon-in-Pulp (CIP) and Carbon-in-Column (CIC). When Ion Exchange is employed for metal recovery in leach and waste streams, Calgon Carbon’s ISEP ® system provides a continuous, consistent and high purity concentrated product while minimizing the use of chemicals, resin and wastes. Calgon Carbon’s continuous ion exchange systems are the most flexible, robust, and accepted in the industry.

Energy from biogas and natural gas for the waste to energy industry

by Dreyer & Bosse Kraftwerke GmbH     based in Gorleben, GERMANY

You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

Automated solutions for the industrial lagoon / pond dredging

by Liquid Waste Technology LLC (LWT LLC)     based in New Richmond, WISCONSIN (USA)

Liquid Waste Technology’s dredging systems are widely used for industrial lagoon dredging applications. Electric driven or diesel engine driven dredges are used for removing mine tailings, dredging chemical processing waste ponds, and slag recovery. Automation can be added to make dredging industrial lagoons more efficient and productive.

Waste dewatering for waste management industry

by BELLMER KUFFERATH Machinery GmbH     based in Düren, GERMANY

Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

Reliable Shredding Technology for Metal-processing Industry

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

Chemical filtration in lacquers for the recycling industry

by atech innovations gmbh     based in Gladbeck, GERMANY

In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers

Environmental testing & compliance screening for energy/environmental sector

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

Industrial Weighing - Tank/Vessel/Hopper Weighing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Liquids, powders, solids, and gases are captured, stored, and processed in many different types of vessels, tanks, hoppers, and unique containers. Whether managing inventory, ensuring product consistency, or eliminating waste, there are numerous requirements for integrating weighing into these structures.

Online Monitoring for the Food & Beverage Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Several on-line monitoring technologies such as non-destructive types have become increasingly important due to the increasing automation and the incorporation of new and more efficient processes in the food industry. Food quality and safety of food are the main points of interest. AppliTek builds and supplies the necessary analytical tools that will allow for a high throughput and a short response time to increase process efficiency and reduce waste, with seamless integration in the existing infrastructure.

Waste recovery for metal manufacturing

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

Solutions for the waste sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

There is an increasing global awareness that the waste problem needs to be solved in a sustainable way. New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective, how to best use or reuse certain products, and where to create new markets and demands.

Need help finding the right suppliers?

Let the XPRTs do the work for you