Landfill Management Applications

43 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Landfill Management ×

Air monitoring equipments for soil contamination monitoring

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Previous land uses or accidental spills can result in Volatile Organic Compound (VOC) contamination of soils. Volatile and semi-volatile compounds can then permeate through the soil and may persist for several years. This contamination can be traced and measured using our Soil Probes in conjunction with our VOC sorbent tubes. Soil probes are also useful in checking the effectiveness of remediation actions. This monitoring technique provides a cost-effective identification of hazardous gases.

Air pollution control for the landfill methane remediation industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Methane gases used for electric generation or pipeline gas synthesis via membrane or pressure swing adsorption (PSA) processes – commonly use incinerators for air pollution control needs.

Lime and Limestone solutions for remediation of soils, industrial sludge and animal waste

by Carmeuse Lime     based in Pittsburgh, PENNSYLVANIA (USA)

Lime treatment has several beneficial effects on soils and industrial sludge wastes that in turn provide benefits to other commercial sectors such as agriculture, landfill operations and land development.

Tunnels

by Manas Geo Tech India Pvt. Ltd.     based in New Delhi, INDIA

The geotextile performs two primary functions when used in the construction of tunnels:- 1. Protection of the linear from abrasion and puncture by protrusions from the base surface of the tunnel well. 2.Drainage of water seeping through the rock and sprayed concrete layer. The in-plane oermeability of the geotextile enables the water to flow to a subsurface drainage collection system. where it is directed awa from the tunne

Geosynthetic Lining for Secondary Containment

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

Waste shredding for the landfill industry

by Metso Recycling Equipment     based in Duesseldorf, GERMANY

However enormous a landfill site first appears, it is surprising how quickly - and how ineffectively - it can become full. Regardless of how bulky, resilient or abrasive the waste may be, effective shredding makes best use of the space available by considerably reducing the volume of waste. Metso shredder equipment includes three sizes of mobile shredders with a variety of mounts, all capable of providing a range of grain sizes. This makes it easy to select the most efficient and cost effective shredding solution for a wide variety of landfills.

Flaring Solutions for the Landfill Industry - Leachate Evaporation

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

Flaring Solutions for Gas Processing Facilities

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

Flaring Solutions for the Petrochemical & Refinery Industry

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

Geosynthetic Lining for Mining Industry

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

Geosynthetics are used in construction of various components of modern mining facilities, including process solution ponds, heap leach pads, stormwater containment, wastewater treatment ponds and closures. Harsh environmental conditions provide a challenge to engineers designing the projects. In addition, increasing environmental and cost pressures are requiring lining systems to achieve greater performance levels than ever. GCLs are rapidly becoming a desired component of mining liner systems because of the benefits they provide in cost effective construction, environmental compliance and process solution leak reduction. In weather-sensitive remote or high-altitude locations, GCLs offer far greater installation efficiencies than compacted clay.

Odour & emission control for muncipal landfills

by Rusmar Inc.     based in West Chester, PENNSYLVANIA (USA)

Mechanical barriers that seal in odors, volatile organic compounds (VOCs), volatile nitrogen compounds (such as ammonia), volatile sulfur compounds (such as H2S) and, of course, fugitive dusts in municipal landfills.

Foam covering of landfills

by Rusmar Inc.     based in West Chester, PENNSYLVANIA (USA)

Rusmar lowers your risks, protects your workers and improves your profit where it counts, at the landfill site. We do this by providing you the most comprehensive daily cover program, highly engineered and field proven application equipment and world class technical service.

Measurement solution for siloxane monitoring in biogas and landfill

by Protea Limited     based in Middlewich, UNITED KINGDOM

The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas can allow for a form of renewable energy. Organosilicon compounds often find their way into land-fill or digester gases as siloxanes. Siloxanes are low-level hazards to the atmosphere in terms of their emissions, however when they are combusted in gas engines the hard silica that is produced is very harsh to the moving parts of the gas engine.

Odor Control for Municipal Waste

by OMI Industries (OMI)     based in Long Grove, ILLINOIS (USA)

Eliminating Industrial Odors Naturally Is Our Civic Duty

To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI® odor neutralizing product. Similar in many ways to its siblings in the Ecosorb® products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni® product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

PEHD membrane sealing systems for basins

by ELD Environmental Leak Detection GmbH     based in Berlin, GERMANY

For reasons of environmental protection, basins often need to be leakproof, e.g. seepage basins on landfill sites. However, it can also be important to ensure, for example, that valuable water does not escape into the subsoil undetected.

Laboratory analysis for environmental consulting

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ormantine USA works closely with consultants, engineers, and other environmental professionals on a daily basis to help find the best solutions to meet individual needs. Ormantine air and soil samplers can be used in: Remediation Performance; Soil Gas Monitoring; Site Assessments; Brownfield Redevelopment; Landfill / Waste Management; Decontamination; Hazardous Material Investigations; Emission Monitoring & Testing; Exposure Assessment; Industrial Hygiene and Risk Management

Recycling equipments for shredding scrap metals

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

Recycling Equipment for Municipal Solid Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

Geosynthetic Lining for Highway and Civil Applications

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater contamination. Another example of using GCL in civil and highway applications is using the liner to contain acid rock and prevent runoff from entering the local water supply.

Need help finding the right suppliers?

Let the XPRTs do the work for you