Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.
You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...
Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...
There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...
Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.
Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.
Oil and gas companies, whether in coastal or offshore settings, use water in various stages of production and for drinking and sanitary purposes. Process water, feed water and wastewater requires disinfection and filtration treatment prior to use, reclamination or discharge. De Nora Water Technologies has been providing water and wastewater treatment solutions to the oil and gas markets for more than 25 years.
With more than 2000 electrolytic disinfection systems globally for oil and gas applications, De Nora understands the requirements that operators have to ensure they operate safely, effectively and as efficiently as possible.
In Fluid Catalytic Cracking (FCC)processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn`t represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the...
Genesis Water Technologies understands the consistently evolving and increasing demands to treat flowback produced water in the oil & gas industry. In addition, we understand the necessity for sustainable produced water treatment solutions to handle the evolving regulatory, fiscal and environmental challenges faced by this industry. Decreased availability of water and increased environmental regulations relating to produced water from unconventional shale gas exploration “hydraulic fracking” and...
"Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).
As a result of global industrialisation and increasing mobility, the demand for crude oil and natural gas continues to grow. As the amount of oil and gas produced increases, so too does the need for transportation and further processing facilities.
Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.
The business of exploration, transportation and refining of oil and gas involves heavy equipment and transportation at each step - equipment that is costly to maintain and to repair. A proper condition based maintenance program enabled predictive maintenance, saving time, money and preventing costly downtime.
With vast experience in the Oil & Gas sector, we help you to perform, comply and thrive. Although energy flows around the world can be volatile and unpredictable, your operation cannot be. Whether upstream or downstream, you need a partner who understands that you must maintain and maximize plant availability - and do it with ever-tighter resources.
Envirotac line of polymers are the perfect solution for oil roads, oil pads, storage areas, and even frac pond lining. When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced, so you can start work immediately.
We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of applications.
Mantec has filtration and separation solutions to meet increasing production and processing needs. Our products have been designed to meet requirements for efficiency, reliability, economy, and size. We have provided many progressive solutions from oil water separation to high temperature gas filtration.