Wastewater Evaporation Applications

33 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Wastewater Evaporation ×

Industrial Meshes for Distillation

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

Evaporators technology for graphic arts, pulp & paper & textile industries

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

Different industries with many different challenges to face. All of them have to find efficient and effective solutions to optimize the available resources for an ever more high competitiveness and, contextually, to comply with the most stringent regulations about the protection of the environment.

Evaporators technology for food and beverage industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

The food & beverage industry uses water for containers’ and plants’ rinsing, raw materials and plants’ washing, and for boilers feeding. All the effluents coming from the production process can be reused a second time allowing water saving and matter recovery (when needed).

Desalination Thermal Multiple Effect Distillation (MED)

by Aquatech International Corporation     based in Canonsburg, PENNSYLVANIA (USA)

Aquatech’s Multiple Effect Distillation (MED) Desalination technology, using a spray film™ design, has been developed and improved over decades of in- house research and onsite experience of such systems worldwide to provide an environmentally friendly system to meet the global challenges of a reduced carbon footprint. Production capacity up to 10 MIGD (45,500 m3/day) in a single unit: Significantly lowers electrical consumption Design flexibility to use low to medium pressure supply steam Minimum down time and therefore a higher plant availability factor High purity product water Operates at a low top brine temperature (<70 °C) to minimize scaling and to prevent corrosion Allows use of lower cost but reliable and proven metallurgy Use of Thermo Vapor Compressor to increase efficiency

Mechanical Evaporation

by EmiControls     based in Bolzano, ITALY

Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of time.

Pure drinking water solutions for dental offices

by Pure & Secure, LLC.     based in Lincoln, NEBRASKA (USA)

Pure Water premium water distillers allow dentists to take control of their own supply of distilled water so they can ensure patient safety and protect their expensive dental equipment. Distilled water is water that has been boiled, sterilized and purified. Distilled water is an important key in preventing bacteria and biofilm build up in your water lines so you can provide a safe water supply for your patients. Pure distilled water also allows for optimum operation, reduced maintenance and increased lifespan for your autoclaves.

Pure drinking water solutions for day care & preschools

by Pure & Secure, LLC.     based in Lincoln, NEBRASKA (USA)

CHILDREN ARE ESPECIALLY SENSITIVE TO TOXINS IN WATER. Children are much more sensitive to chemicals in the water supply than adults. A child’s brain continues to grow after birth, and this development process is very sensitive to chemical interference. Research now suggests that a single small dose of a chemical on a critical day of development can cause permanent learning disorders*. Now you can show parents that your preschool is the market leader in protecting their children from toxins that could be present in your tap water. Our premium water distillers allow you to provide your children with fresh, distilled water, the safest drinking and cooking water available.

Industrial solutions for cooling water contamination

by Real Tech Inc.     based in Whitby, ONTARIO (CANADA)

Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

Vacuum excavation solutions for lateral clean out – Jettings

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Vac-Tron Industrial Vacuum Equipment makes manhole clean out easy and efficient for municipal public works departments. Our Mini Combo Series can clean out a manhole in seconds, allowing a reduction in man-hours for this type of job, helping reduce overhead and accomplishing more for the taxpayer’s money.

Vacuum excavation solutions for grain elevators sector

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Vac-Tron - Wet/Dry Industrial Vacuum Excavation System models are used widely in the Grain Industry. Grain Elevators and/or Silo’s are the main focus. The Maintenance Department deals with `Housekeeping`. The Vac-Tron - Wet/Dry Industrial Vacuum Excavation System can be used to clean the bottom of the elevator or to clean up spills. They can also be used to free up a stuck elevator without losing product.

Vacuum excavation solutions for micro-tunneling / foundation stabilization sector

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Vac‐Tron vacuum excavation equipment can be used for the application of Micro‐Tunneling and/or Foundation Stabilization. Microtunneling is used to construct small tunnels. This process enables access to plumbing, electrical wiring, termite repair, flooding, crawl space and historical restoration without compromising the integrity of the foundation. By using the “soft‐dig” technique under the foundation or slab, there is no risk of damaging any previous utilities or structural damage to the building. The debris removed will only have to be handled one time. This process would be best served with the Vac‐Tron AIR855 model to accommodate the volume of debris, as well as having the flexibility of back‐filling with the dirt that was removed after the process has been completed.

Industrial wastewater treatment

by H2O GmbH     based in Steinen, GERMANY

Your customized wastewater treatment system – based on the VACUDEST Modular-System An integral part of H2O´s philosophy is the development of customized system solutions. Every industrial wastewater is different. The varity of applications requires a customized wastewater treatment system. Thus we don't have the VACUDEST wastewater treatment system "off the shelf". To ensure that a customized solution is affordable for our customers we developed the VACUDEST Modular-System. Continuous innovation for more cost efficiency We continuously improve our high quality VACUDEST wastewater treatment systems. We have made it our obligation to create genuine benefits through innovation: Self-cleaning heat exchangers, low maintenance systems and a reliable machine control system guarantee reliable processes. As a result, you receive a crystal clear distillate which meets the highest standards. The top quality, efficient and environment friendly VACUDEST vacuum distillation systems are the ri

Evaporators technology for power industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

Evaporators technology for chemical industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

Water is one of the most important solvent or component in the chemicals production industry. From the production of water as a solvent for formulas, to the water used for mixers and reactors washing operations, the management of the whole water cycle from inlet to final discharge is a primary importance issue to face.

Evaporators technology for mining & primary metals industries

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove heavy metals, arsenic and other contaminants for safe discharge into sensitive environment.

Evaporators technology for photovoltaic & Microelectronics industries

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

Spent coolant wastewater solution

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be disposed of.

Parts cleaning wastewater solution

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Parts cleaning wastewater is a common application for ENCON Wastewater Evaporators. Parts cleaning is almost entirely water-based since the Montreal Protocol forced companies to abandon chlorinated fluorocarbons (CFC’s) and solvent degreasers. The wastewater is generally brownish gray and translucent with a soapy appearance. It may have trace settled solids and floating oil.

Dye penetrant wastewater treatment

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Dye penetrant wastewater includes the presence of a fluorescent dye at about 2-3% in the wastewater. Dye penetrants are used as a method of testing weld integrity to confirm there are no leaks. Dye Penetrant wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however, can become quite expensive.

Air scrubber wastewater solution

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Air Scrubbers strip out contaminants from exhaust stacks typically by trickling a stream of salt solution through a bed of media to extract contaminants by putting them into solution. The salts found in these solutions are typically sulfates, chlorides, and carbonates. Air Scrubber wastewater tends to have high total dissolved solids (TDS) or salts. Air Scrubber Wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however, can become quite expensive.

Need help finding the right suppliers?

Let the XPRTs do the work for you