Only show results in Virginia? Ok

Water Gates equipment for Water and Wastewater

  • Premium

    Rotork - Model IS Series - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spurgearboxes suitable for the most demanding motorisedapplications where the gearbox input shaft needs to beparallel with the valve stem for globe and gate valves andsluice gates.Torque range up to 43,386 Nm (32,000 lbf.ft).Thrust range up to 2,900 kN (652,000 lbf).20 sizes. Ratios from 1:1 to ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Motorised Multi-Turn Gearboxes Product line

  • Premium

    Rotork - Model MTW Range - Multi-Turn Worm Gearboxes

    The multi-turn worm gearboxes are used for applications such as sluice gates and dampers.Torque range up to 162,000 Nm (119,000 lbf.ft).11 sizes. Ratios from 40:1 to 5,760:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Multi-Turn Worm Gearboxes Product line

  • Premium

    Rotork - Model HOB/MPR - Bevel Gear Operators

    Hand operated bevel gears suited for sluice gates, gate, and globe valves.Torque range up to 8,018 Nm (5,914 lbf.ft).Thrust range up to 1,557 kN (350,028 lbf).12 sizes. Ratios from 2:1 to 81:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Bevel Gear Operators Product line

  • Premium

    Matergear - Model SS Bevel Range - Stainless Steel Bevel Gear Operators

    Heavy-duty stainless steel 316 housing multi-turn gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Stainless Steel Bevel Gear Operators Product line

  • Premium

    Rotork - Model IB Series - Multi-Turn Bevel Rotary Devices

    Complete range of heavy-duty cast iron multi-turn bevel gearboxes suitable for the most demanding motorized applications for cast and fabricated sluice gates, gate valves and globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Multi-Turn Bevel Rotary Devices Product line

  • Premium

    Model HOB/MPR Range - Bevel Gear Operators

    Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to 81:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Bevel Gear Operators Product line

  • Premium

    Model IS Range - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice gates.

    By Rotork plc based in Bath, UNITED KINGDOM. from Motorised Multi-Turn Gearboxes Product line

  • Premium

    Model MTW Range - Worm Gearboxes

    The multi-turn worm gearboxes are used for applications such as sluice gates and dampers. Torque range up to 162,000 Nm (119,000 lbf.ft). 11 sizes. Ratios from 40:1 to 5,760:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Worm Gearboxes Product line

  • Premium

    Rotork - Mastergear Large Bevel Gear Range

    Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Mastergear Large Bevel Gear Range Product line

  • Premium

    Model DSB Range - Dual Shaft Bevel Gear Operators

    Complete range of multi-turn bevel gearboxes with two shafts for use with dual stem sluice gates and penstocks. Torque range up to 8,135 Nm (6,000 lbf.ft). Thrust range up to 1,320 kN (296,750 lbf). 13 sizes. Ratios from 1:1 to 120:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Dual Shaft Bevel Gear Operators Product line

  • Premium

    Grande - Model ACU-GATE - Flushing Gate System

    The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Flushing Gate System Product line

  • Model Big Tex 7x14 - Dump Trailer

    Our Big Tex Dump Trailers come with grommet mount sealed LED lights, tandem 7000 lb axles with brakes, 24' sides, adjustable coupler, slide in ramps, dual gate, ez lube hubs, 45° dump angle and a tarp (not shown). For more on these Big Tex Dumps give us a call or stop by today. 

    By Wholesale Trailers of Alberta Ltd (WTA Trailers) based in Nisku, ALBERTA (CANADA).

  • Titan - Model TIT4837 - Dump Trailer

    This trailer comes with a spare tire, 10,000lb jack, adjustable coupler, with a 2 5/16 ball (or can be switched to pintle), two way spreader gate, and rear ramps that slide under the belly of the trailer. It comes with stake pockets, tie rings, two 7000lb Dexter torsion tube axles, Goodyear tires, an on-board battery charger, all LED lighting, and ...

    By DLMR Trailer Company based in Chardon, OHIO (USA).

  • Bumper Pull Trailers

    The bumper pull trailer comes in lengths of 12’, 14’ or 16’ and in widths of 6’ or 6’6”. They are equipped with high quality Dexter axles, with GVWR from 7,000 lbs to 10,400 lbs.

    By Stoll Trailers Inc based in Abbeville, SOUTH CAROLINA (USA).

  • Jet-Flow Gates

    Jet-flow gates are similar to high pressure bonneted slide gates and are used as regulating gates under free or submerged discharge conditions. The combination of a circular seat ring and floating seal ring upstream of the gate leaf concentrate the discharge flow into a jet with minimal cavitation or vibration. Jet Flow Gates are typically ...

    By Steel-Fab, Inc. based in Fitchburg, MASSACHUSETTS (USA).

  • Gilson - Heavy Duty 1/16 Sample Reducer

    SP-52 features a hopper with four times more sample capacity than traditional reducer models. A spring-loaded positive-locking knob quickly adjusts the flow table to 45° or 60° dividing positions. The 1.0ft³ (28L) hopper has a fully-adjustable sliding gate for precise control of flow rate. The gate can also be locked open for ...

    By Gilson Company, Inc. based in Lewis Center, OHIO (USA). from Heavy Duty 1/16 Sample Reducer Product line

  • Flap Valve

    Flap valves are used for end closure of outfall lines, or in manholes, to prevent entrance of backwater. They swing open under direct pressure to release the outfall fluid and close when direct pressure is relieved. The valve disc is offset from vertical to ensure positive closing.Flap valves are used in filtration and sewage disposal plants and ...

    By M&H Valve Company based in Anniston, ALABAMA (USA). from Flap Valve Product line

  • Ductive Iron Flap Valve

    Available in size range 80mm – 600mm as standard (larger sizes available). Pressure range 6m on.

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

  • AHS - Chain Link Fence

    Chain link fence, also known by some as cyclone fence, is one of the most popular choices of fence for both light residential to heavy commercial fence applications. Chain link fence is one of the most practical styles of fence, relatively easy to install, and very cost effective.http://www.filter-wiremesh.com/wire_mesh_html/chainlinkfence.html

    By Anping County Anhesheng Hardware Mesh Products Co.,Ltd. based in Hengshui,, CHINA. from Chain Link Fence Product line

  • Model AG-500 - Spreaders

    Our adjustable wheel track spreaders provide years of rugged use. The AG-500 (5 ton) features unitized, one-piece stainless steel body construction. Conveyor trough, meter gate, rear skid section and roller chains are also constructed of stainless steel. The rear safety bumper, tarp and supports are standard equipment. You also have a choice of a ...

    By Agro-Chem, Inc. based in Wabash, INDIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you