Only show results in Virginia? Ok

Water Intake Structures Applications

  • Premium

    Monitoring drinking water quality

    Drinking water supply and distribution systems around the world (a critical and interdependent component of a nation’s infrastructure) are vulnerable to both intentional and accidental contamination. Unusual water quality may serve as a warning of potential contamination. The available physico-chemical sensors utilize general water quality parameters, such as free chlorine, oxidation reduction potential (ORP), total organic carbon (TOC), turbidity, pH, dissolved oxygen, chloride, ammonia, nitrate to detect the contamination. Generally, one or more of these water quality parameters will change due to the injection of a contaminant. However, no single chemical sensor responds to all possible contaminants nor can they give any indication of the potential toxicity of complex mixtures.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Monitoring of raw water intake

    The Situation:

    Hydrocarbons in municipal water supplies,  including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of hydrocarbons. Continuous monitoring of water source intakes can prevent system contamination and subsequent damage.  Accurate, low maintenance monitoring systems such as the TD-4100 XD and XDC have been protecting water intakes worldwide for over 20 years.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Sea Water Intakes & Outfalls

    Desalinated sea water is a major water source for many countries. These facilities are often built with power generation plant and a major factor for all installations is reliability. This reliability starts with the sea water intake and regardless of the desalination technology (MSF, MED, RO) unplanned plant shut downs due to the ingress of hydrocarbons or a sudden jelly fish attack are absolutely unacceptable. The DESMI Oil Spill Response segment have many years experience in the design, manufacture, installation and commissioning of permanent oil boom and jelly fish net systems for a vast range of sea water intake systems. We have an impressive history of proven oil spill technology at various locations around the world including the harsh Middle East environment.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Cleaning process for water intake

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Odor control solutions for wastewater industry

    Municipal wastewater treatment plants (wwtp) provide an essential community service that is vital for the protection of public health and the environment in which we live. Without affordable wastewater services, the quality of life within a community or municipality can be drastically diminished. Most cities, towns and communities in the US and Cananda provide wastewater treatment services, unfortunately these services and plants come with many undesirable off gasses and odors. There are a number of challenges that currently face the wastewater treatment industry including, global urban population growth, more stringent discharge regulations for industries, and demand for water conservation through wastewater reuse.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Industrial and commercial water filtration for bore-hole intake

    When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Trislot wedge wire screens for water intakes

    Users of large volume of surface water know already the advantages of the Trislot® wedge wire screens: high open area, no clogging, large filtration surfaces, long service life.

    By Trislot N.V. based in Waregem, BELGIUM.

  • LITTER PICKER Applications

    The Litter Picker litter collection machine can perform many litter-picking application with ease. By adapting the same patented tine raking technology that made Barber`s SURF RAKE beach cleaners famous, the LP1`s raking conveyor is capable of picking both small and large materials. While it has the power to collect car bumpers, large rocks, full bags of trash, and tire retreads, its rows of offset tines capture cigarette butts and bottle caps with similar ease.

    By H. Barber & Sons, Inc. based in Naugatuck, CONNECTICUT (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you