Show results for
Refine by
Applications
- Tunnel solutions for the gaseous pollutants
- Tunnel solutions for the extractive areas
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Monitors, gas analyzers solutions for aerospace & defense industry
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Potassium Extraction from Soil
- Flame Photometer for Recommended Sample Handling Techniques & Considerations
- Flame Photometer for Measurement of Calcium in Serum & Urine
- Flame Photometer for Measurement Of Lithium In Saliva Sector
- Flame Photometer for Measurement of Calcium in DNA and DNP
- Flame Photometer for Measurement of Potassium in Unashed Plant Leaves
- Flame Photometer for Calcium in Unashed Plant Leaves
- Flame Photometer for Measurement of Trace Elements in Biodiesel
- Flame Photometer for Units of Concentration
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Flame Photometer for Measurement of Sodium and Potassium in Cheese
- Flame Photometer for Measurement of Potassium and Sodium in Bread
- Flame Photometer for Measurement of Potassium and Sodium in Meat
- Flame Photometer for Measurement of Calcium in Fresh Fruit
- Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
- Flame Photometer for Salinity in Processed Foods
- Flame Photometer for Determination of Sodium in Biodiesel by Flame Atomic
- Flame Photometer for Measurement of Low Concentrations of Sodium in Cement
- Flame Photometer for Measurement of Lithium in Minerals
- By design, In-Situ equipment works together
- Pit Lake Monitoring - Monitoring the quality, level and flow of water in a flooded open mine pit.
- Gas detection for the oil and gas industry
- Tunnel solutions for the visibility monitor areas
- Water monitoring instruments for surface water monitoring
- Water monitoring instruments for groundwater monitoring
- Water monitoring equipment for aquifer characterization industry
- Water monitoring equipment for mining
Scada Systems Equipment Supplied In Singapore
54 equipment items found
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
SCOPE provides a secure platform for monitoring and controlling a diverse range of assets including critical national infrastructure, from small plant installations through to the management of entire organisations’ networks. SCOPE Intuition extends SCOPE’s core alarm system and provides advanced features to efficiently manage and track all reported alarms from notification to ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The FloSerie3 FloSI card provides an SDI-12 or ModBus output to interface an XCi device to SCADA systems and radio ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
HSLIS M65 ANSI/ISA-compatible particle counters allow continuous real-time monitoring of fluid particle contamination levels in Class I, Div 2 environments. Easily integrates into Facility Net soware (or existing SCADA system) to provide an economical way to monitor multiple flow ...
Manufactured by:TTK S.A.S. based inParis, FRANCE
The FG-ALS4-OD, Four Zones Alarm & Locating System Unit is designed to be used with FG-OD hydrocarbon range of products, to give instant detection and location of liquid (non-conductive hydrocarbon liquids and solvent). In the event of liquid leak or default on the sense cables for each zone, the responses from the FG-ALS4-OD alarm & locating unit: An audible alarm is triggered ...
Manufactured by:Aquaread Ltd, Part of the NKE Group based inBroadstairs, UNITED KINGDOM
The LeveLine is compatible with SDI-12 and Modbus communication protocols, integrating seamlessly with telemetry, SCADA systems, and additional telemetry devices. It requires minimal power, supports external power sources, and is complemented by intuitive PC software for setup and data ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The TROLL Net Hub is a networking device that connects up to four or eight instruments into your telemetry or SCADA/PLC system. The hub is ideal for long-term remote site monitoring and process control, including applications like aquifer characterization and nested well monitoring. You can customize the system by linking a variety of In-Situ ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
Whether you need to measure flow as well as conductivity, pH and rainfall, or utilize a downward looking ultrasonic depth sensor to measure pond levels, the FloPro is fully expandable for your needs. FloPro is easily interfaced to SCADA/telemetry systems and HydroVu Data Services for remote data ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Standard Configuration: The MCG 3200 Field Interface Card Enclosure is a powerful, flexible interface that accepts data from standard serial devices via TTL, current loop, RS232C, or RS 485 and outputs Tankway regulated field power and proper signal voltage levels. Moreover, since each field wiring branch can be isolated using the MCG 3200, a complete cable failure in one branch will not affect ...
Manufactured by:Online Electronics Ltd. (OEL) based inAberdeen, UNITED KINGDOM
Online Electronics range of compact magnetic signallers detect magnetic pigs in any pipeline medium, removing any uncertainty over pig passage allowing operations to continue on schedule. Minimal set up is required ensuring that time is not wasted setting up various parameters. Events are signalled as they occur via a graphical display and high brightness LEDs positioned around the perimeter of ...
Manufactured by:Westermo Teleindustri AB based inStora Sundby, SWEDEN
Remote access removes boundaries, eliminates the need for time consuming site visits and provide a network infrastructure suitable for today’s “always-on” ...
Manufactured by:Westermo Teleindustri AB based inStora Sundby, SWEDEN
Remote access removes boundaries, eliminates the need for time consuming site visits and provides a network infrastructure suitable for today’s “always-on” society. The MRD-305-DIN industrial M2M/3G gateway/router uses the Internet to cost effectively inter-connect systems, allowing HMI, PLCs, sensors etc to communicate with each other. A compact case design with a power input ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
Use the Rugged TROLL Direct-Read Cable to connect your Rugged TROLL 200 Data Logger or Rugged BaroTROLL Data Logger directly to a controller or ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Peace of Mind: The MCG 7030 Touch Panel Alarm Monitor offers complete remote checking of alarm probes through cutting-edge technology that makes the system accurate, extremely reliable and fully compatible with the MCG 1090 and the MCG 1095 Level Alarm ...
Manufactured by:Fluke Process Instruments based inEverett, WASHINGTON (USA)
The ES Thermal Imaging System for Sheet Extrusion from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated ...
Manufactured by:Crowcon Detection Instruments Ltd based inMilton Park, UNITED KINGDOM
Vortex FP and Vortex FP Compact are ATEX certified Exd Flameproof control panels for use in Zone 1 or Zone 2 hazardous areas such as on offshore production platforms or within refineries. Both offer all of the standard Vortex features, as well as a display fitted with magnetic switches which enable the system to be interrogated or inhibited without opening the system ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 1200M Series Transmitter is an extremely flexible microprocessor based RTU. Receiving an analog input it converts the analog signal to digital, displays the data, and transmits the data via the L&J 4-wire data highway or other digital protocols to the system computer. The MCG 1200M can also provide the loop power for 24VDC loop powered ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Field gateway for tank sensor operation and monitoring and integration into inventory control system. The Tank Side Monitor NRF590 is a sensor integration and monitoring unit for bulk storage tank gauging applications. It can be used with Micropilot radar or Proservo level gauges and can be combined with other HART compatible devices to communicate tank sensor data to a control host. Various ...
Manufactured by:Pem-Tech, Inc. based inSugar Land, TEXAS (USA)
PemTech's PT605-CO2 process analyzer has been designed for the detection of carbon dioxide in process streams and natural gas pipeline. The CO2 analyzer is not only cost effective, but highly accurate and reliable. An industry standard 4-20mA output and three programmable alarm relay contacts are provided (these relay contacts can be used to control shut in valves). A large LCD display along with ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The Level TROLL 500 is In-Situ’s most popular water level data logger. A cost-effective option suited to a wide variety of projects, the Level TROLL 500 logs continuous measurements of water level, water pressure, and temperature. Titanium construction offers durability and long-lasting performance in fresh or saline groundwater environments. Available in vented (gauged) pressure ranges up ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Accurate and Reliable: The construction of this probe makes it ideal for severe service installation where reliable performance is essential. The explosion-proof housing is approved for use in Class I, Division 1, Group C and D environments, allowing the MCG 1030 to be used in application where the distance from the probe to the receiver is too great to utilize an intrinsically-safe ...