Noise Pollution Equipment in Cameroon

Serving Cameroon | Near Cameroon
353 Results found
  • Category: Health & Safety ×

  • Subcategory: Noise Pollution ×

  • Location: Africa ×

  • Location: Cameroon ×

Optimic 4130 Microphone - Contact Microphone

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Fiber optical contact microphone for structure-borne sound. Fiber optical contact microphone for indoor/outdoor remote monitoring of structure-borne sound signals.

Acoustic Enclosures

by Wakefield Acoustics Ltd     based in Cleckheaton, UNITED KINGDOM

Wakefield Acoustics designs, manufactures and installs a wide range of acoustic enclosures. From standard proprietary models through to custom designed full turn key solutions, we work closely with OEM’s, end users, contractors and consultants to address complex noise problems across a wide range of industries. Each acoustic enclosure is ...

Sound Absorber

by Colasit     based in Spiez, SWITZERLAND

Sound-proofing enclosure with casing made of approx. 1.2 mm thick, sendzimir-galvanised steel sheeting. Self-supporting frame made from aluminium profile with a closely-fitting edge-protection seal. Non-imflammable mineral wool filling covered with perforated steel sheeting. Removable side panels. Wall thickness 45mm. Convection cooling or forced ...

Model Bs 14 Series - Pod Silencers for Rotary Positive Blowers

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

Pod silencers for rotary positive blowers are particularly designed and manufactured for fast assembly and functioning of blower packages. At the same time, it provides maximum silencing and reduced pulsation on blower discharge for the ones functioning above the specified transition speed. At EI Williams, we combine the silencer pod for blower ...

Model Bs 44 Series - Pod Silencers for Rotary Positive Blowers

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

The Bs 44 Series Chamber absorption type pod silencers for rotary positive blowers are similar to that Bs 14, but with the only difference that the former is based on chamber absorption type silencer mechanism while the latter is only based on chamber construction type pod silencing mechanism. The chamber absorption pod silencers are particularly ...

Silencers for Centrifugal Compressor

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

Centrifugal compressors are noisy and require noise control. Just as a pump raises the pressure on a liquid, a compressor raises air or gas pressure. Centrifugal compressor noise is produced primarily by blade-tip turbulance which is a function of horse power, speed, discharge pressure, piping velocities, number of stages of compression, type ...

Vent Silencers for Pipelines

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

A vent silencer or a blow off silencer is a device used to reduce unwanted noise created by gas or steam flow in a pipeline discharging directly into the atmosphere. This noise can be generated due to the high velocity flow through the valve and turbulence created around any obstacle in the line that suddenly restricts or changes the direction of ...

AirmoQuality - Cabinet System

by Chromatotec Group     based in Saint Antoine, FRANCE

Specific sulfur control by our cabinet airmoQUALITY. The volatile sulphur compounds demand a continuous control at low levels. The GC with double flame photometric detector enables to separate H2S and COS as well as to delete any interference with methane. The high signal to noise output makes the monitoring at low/mid ppb levels possible. This ...

BULLETIN - Model 1940-9 - Vent Silencer

by Burgess Manning, Inc.     based in Orchard Park, NEW YORK (USA)

This new, patented design utilizes a two or more step silencing treatment, with each step accomplishing a diffusion and smoothing of the flow and an overall absorption of sound. The first stage provides a sturdy shock absorbing cushion to receive and mitigate rough blasts; the additional stages moderate and smooth the flow while absorbing sound ...

BULLETIN -LCV - Model 1950-9 - Vent Silencer

by Burgess Manning, Inc.     based in Orchard Park, NEW YORK (USA)

Silencer is of all-welded steel construction. Exterior surfaces are prime coated. Acoustic absorptive material is fiberglass.Gas flow passes through an inlet diffuser and then past a perforated tube, surrounded by deep layers of sound absorbing material which attenuates vent noise particularly in the high frequency range with a minimum pressure ...

Need help finding the right suppliers?

Let the XPRTs do the work for you