- Home
- Equipment
- austria
- health safety
- spill control
Show results for
Refine by
Applications
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for aerospace & defense industry
- Air pollution, emission and process monitoring systems for food & pharma
- Air pollution, emission and process monitoring systems for metals
- Air pollution, emission and process monitoring systems for agriculture
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Oil sampling for the environmental industry
- Air pollution, emission and process monitoring systems for chemicals
Health Safety Equipment Supplied In Austria
57 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
Premium
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
Skimming of slow sand filters without emptying has long been a request from the water market. Weda is now launching a remote-controlled robot that can run on the sand bed and remove the so-called schmutzdecke and pump it to the desired landfill. The machine sucks in 1- 3 cm of schmutzdecke and the sand that is pumped out of the slow filter. The method also works on facilities with infiltration ...
Manufactured by:Probig GmbH based inVöcklamarkt, AUSTRIA
Top quality-certified worldwide for the petrochemical industry. PROBIG® creates worldwide innovative solutions for the most diverse API applications to remove bottom sludge and floating scum. Our API scrapers are designed according to norm 421 of the API (American Petroleum Institute). With their great energy efficiency, functionality, reliability and durability, PROBIG® systems, ...
Manufactured by:WWS Wasserkraft GmbH based inNeufelden, AUSTRIA
In the event of repairs to the turbines or in the event of flooding, it is necessary to divert the water flow and some of the water must also be routed past the turbine in controlled operation. Sluice gates and roller gates control the flow of ...
Manufactured by:WWS Wasserkraft GmbH based inNeufelden, AUSTRIA
Flap gates are also well known as crest gates are an important component for regulating the water level in front of the power plant. Especially in the event of a flood, a reliable flap gate is essential to avoid backwater and thus ...
Manufactured by:NCH (UK) Ltd. based inBilston, UNITED KINGDOM
Excellent absorption strength to remove the entire spill; Cleans and absorbs in one operation. Absorbs both solvent and water based spills. Non-dusty. Suitable for all floor types. Chemically ...
Manufactured by:Depac based inEschen, LIECHTENSTEIN
Fully-automatic seal. Split or continuous. No adjustment necessary. Stable lip design. Permanent self-lubrication. No extruding. Non-absorbent polymer material. Minimum friction. Available in mm and inches. Pressure up to 500 ...
Manufactured by:Enviroflex GmbH based inVienna, AUSTRIA
The Distilled Oil Polishing Unit (DOPU) from Enviroflex GmbH is a sophisticated technology designed for refining and enhancing black distilled lube oil and other hydrocarbons. Utilizing a unique process, the unit employs activated sorbent within a series of up to 144 long columns to effectively reduce the color index, sulfur content, acidity, and odor of the distilled oil. This unit is capable of ...
Manufactured by:Kässbohrer Geländefahrzeug AG based inLaupheim, GERMANY
When cleaning oil-contaminated beaches, time does matter. It's important to keep the oil from penetrating deeper layers of sand, that are not affected. Therefore, BeachTech beach cleaning machines gently scrape the contaminated sand surface with the pick-up blade. The screening technology and particularly fine screening belts are used to separate the oil from the sand. BeachTech beach cleaners ...
Manufactured by:SEDA-Umwelttechnik GmbH based inKössen, AUSTRIA
The SEDA-Double station for improved efficiency and power. Up to 100 end of life vehicles per day without operator idle or waiting times. The SEDA-Double station combines two state-of-art SEDA-Single stations resulting in a doubled capacity and an optimized workflow. Some of the countless advantages derive from the use of powerful suction pumps in combination with the certified SEDA-Tank drilling ...
Manufactured by:SEDA-Umwelttechnik GmbH based inKössen, AUSTRIA
Powerful and efficient, the SEDA Gearbox drilling machine is the high efficiency solution to drain waste oils from engines, transmissions and rear differentials.The SEDA Gearbox drilling machine evacuates waste oils from engines, transmissions and rear differentials by drilling into the oil casings or pans. The height adjustment and drill speed are achieved by means of a gas spring and the foot ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Products for reliable sludge level measurement in sedimentation tanks. Sludge level sensors and transmitters help you to pump sludge, not water. They continuously monitor the separation and transition zones of the clarification and settling phases, so that you can operate your process efficiently. Typical installations are at the primary and secondary clarifier of wastewater treatment plants to ...
Manufactured by:Freylit Umwelttechnik GmbH based inVienna, AUSTRIA
The FREYLIT modular plate-pack system the perfect solution for oil separation in large scale industrial oil sperarators. In many industries process waters are contaminated with oil which needs to be removed before returning the water into the process cycle for example in steel mills. Coalescent plate pack seperators are the most economic method of treating such process wateres efficiently. Large ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
HSLIS M65 ANSI/ISA-compatible particle counters allow continuous real-time monitoring of fluid particle contamination levels in Class I, Div 2 environments. Easily integrates into Facility Net soware (or existing SCADA system) to provide an economical way to monitor multiple flow ...
Manufactured by:NCH (UK) Ltd. based inBilston, UNITED KINGDOM
Spill management response tool; Help comply with ADR 2009 Directive on Hazardous Waste Transportation. Versatile kit, can be used in any vehicle or ...
Manufactured by:MTA Messtechnik GmbH based inSt. Veit an der Glan, AUSTRIA
The MTA Pool Scan is used to check pools for leaks when filled. Accordingly, you no longer have to drain your pool to be checked or wait until the water level has lowered to the leak. On the contrary – the MTA Pool Scan measures the tightness of the pool and its connections when filled. With the help of the probe, you can check inlet and outlet pipes, as well as skimmer nozzles for leaks ...
Manufactured by:Freylit Umwelttechnik GmbH based inVienna, AUSTRIA
Floating oil separator with integrated dirt basket for the collection of floating garbage. The floating oil separator is a compact, low-maintenance system for preventing oil from spreading on water surfaces in the event of oil accidents at Marinas, Harbours & Fuel stations for ...
Manufactured by:Freylit Umwelttechnik GmbH based inVienna, AUSTRIA
FREYLIT Oil separators are designed to the exact specification and requirements of our client.The modular plate-pack system is the perfect solution for oil/water separation.FREYLIT coalescent plate separators are the most economic method of treating process water efficiently. FREYLIT has been producing and installing a wide range of oil/water ...
Manufactured by:Krickl Waagen Systeme GmbH based inStockerau, AUSTRIA
Vehicle-mounted weighing systems are often a deeply integrated part and can only be installed during the construction of the vehicle in a cost-optimized manner. In addition, there are weighing applications on moving parts, some of which are subject to high mechanical loads, such as Cranes and skimmers. Solutions in which power supply and signal lines have to be wired often lead to regular service ...
Manufactured by:WWS Wasserkraft GmbH based inNeufelden, AUSTRIA
Coarse rakes, fine rake fields and trash rake cleaning systems are used to keep branches and other floating material away from the turbine ...