- Home
- Equipment
- united kingdom
- soil groundwater
- groundwater sampling
Refine by
Applications
- Environmental monitoring solutions for the groundwater sampling
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
- Environmental monitoring solutions for the oil refineries & petrochemical industry
- Environmental monitoring solutions for the mining sites industry
- Environmental monitoring solutions for the site remediation industry
- Environmental monitoring solutions for the landfill industry
- Landfill lining
- Geosynthetic Lining for Mining Industry
- Coal Combustion Residuals Disposal for Power Plants
- Geosynthetic Lining for Ponds
- Geosynthetic Lining for Secondary Containment
- Geosynthetic Lining for Canals, Stormwater Impoundments and Wetlands
- Geosynthetic Lining for Highway and Civil Applications
- Environmental technology solution for landfill lining systems sector
- Portable and fixed gas analysers for remediation and groundwater
Soil Groundwater Equipment Supplied In United Kingdom
190 equipment items found
Manufactured by:CETCO based inNew York, NEW YORK (USA)
PUREGOLD GROUT is an easy mixing, organic-free, high-solids bentonite grout engineered to form a contaminant resistant seal without affecting groundwater chemistry. PUREGOLD GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma’s insitu bladder pump water sampler allows for a groundwater sample to be taken using CPT equipment in as little as an hour. When compared with conventional water sampling in boreholes, our CPT push water sampler is not only faster but also ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
GROUNDING GROUT is a high-solids, single-component bentonite grout. GROUNDING GROUT is specially formulated to provide a conductive seal around grounding rods. When used to seal drilled boreholes in which vertical grounding rods are placed, GROUNDING GROUT increases the grounding system’s conductivity by lowering the resistivity from 300 ohms/meter with normal soil to 0.76 ohms/meter. ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The Aqua TROLL 400 Low-Flow Pelican Case is a field-ready, waterproof, protective case that holds everything you need to perform Low-Flow groundwater sampling with the Aqua TROLL 400 Multiparameter Probe. The case includes a foam insert with cutouts to hold the Aqua TROLL 400 Instrument, cable, battery pack, mobile device, calibration solutions, flow cell, flow cell fittings, and base plate. The ...
Manufactured by:RainCatcher Products & Services based inWirral, UNITED KINGDOM
Reinforcing slopes and embankments with a reliable system for protection against erosion has always been a central talking point in road construction and landscaping. The fundamental requirements for use in this area are optimally fulfilled by ECOGRID®. When installed, an ECOGRID® surface permanently holds back the forces of erosion with its self-stabilising safety locking ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
PUREGOLD GEL is a minimum 80 - 90 bbl yield, organic-free, untreated, high quality bentonite drilling fluid designed for the groundwater monitoring industry. It complies with API 13A Section 10, Specifications for Drilling Fluid Materials and is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
QED PurgeScan Technology provides an easier and more accurate assurance of purge stabilization, automatically signaling when stabilization has been achieved for selected water quality parameters and saving your data file with stabilization noted. MicroPurge MP25 Flow Cell purge water quality monitor leads the field in performance, convenience, completeness and ...
by:Cornelsen Umwelttechnologie GmbH based inEssen, GERMANY
For low-flow ground water purging and sampling. The pneumatic Mini Bladder Pumps are designed to obtain a representative ground water sample with the assistance of a controller to provide variable flow rates. The controller allows the user to match the pumping rate to the well recharge rate, limiting the stress on the formation. With the small volume per cycle, the fluid velocity at the pump ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
This combination water temperature sensor and water conductivity sensor is compatible with the Aqua TROLL 500 and Aqua Troll 600 multiparameter sondes providing: Water temperature measurement, Actual and specific conductivity, Salinity, Total dissolved solids (TDS), Resistivity, Density, Cleanable conductivity water ...
Manufactured by:Harwil Corp. based inOxnard, CALIFORNIA (USA)
In Line Flow Switch 1/2 Inch. Designed for extreme, long-term reliability. Detects and signals flow change. Continuously adjustable while in operation. 6 interchangeable orifices plus 2:1 continuous switch adjustment with each orifice. Calibrated independent of line pressure and temperature. Maintains calibration limits when subjected to reasonable line hydraulic hammer or surge pulses. ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The smarTROLL Multiparameter Low-Flow Kit contains everything you need to conduct low-flow groundwater sampling with the smarTROLL Multiparameter Handheld. Low-Flow Sampling equipment is used to direct the flow of water past the sensors of the smarTROLL instrument during purging and low-flow sample tests. The seal between the instrument and the flow cell prevents water oxygenation prior to ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The Aqua TROLL 400 Low-Flow Fittings Kit contains all the tubing fittings needed to conduct low-flow groundwater sampling with the Aqua TROLL 400 Multiparameter Probe. Low-Flow Sampling equipment is used to direct the flow of water past the sensors of the Aqua TROLL 400 Instrument during purging and low-flow sample tests. The seal between the instrument and the flow cell prevents water ...
Manufactured by:In-Situ Environmental based inFort Collins, COLORADO (USA)
The Aqua TROLL Low-Flow Kit contains everything you need to conduct low-flow groundwater sampling with the Aqua TROLL 500 and the Aqua TROLL 600 Multiparameter Sondes. Low-Flow sampling equipment is used to direct the flow of water past the sensors of the Aqua TROLL during purging and groundwater low-flow sample tests. The seal between the instrument and the flow cell prevents water oxygenation ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
RESISTEX Geosynthetic Clay Liners are a polymer-modified bentonite GCL that are engineered to provide the highest level of chemical compatibility for hydraulic barrier performance in extremely aggressive leachate environments. Our RESISTEX family of GCLs offer compatibility with a wide range of pH, electrical conductivity, and ionic strengths that are common to mining liquids. CETCO recommends ...
Manufactured by:Regenesis based inSan Clemente, CALIFORNIA (USA)
When Oxygen Release Compound (ORC) was first commercialized in 1994, it was emplaced into groundwater wells using ORC Filter Socks. Filter socks are permeable, fabric sleeves filled with pure ORC or ORC Advanced® controlled-release oxygen material. Each filter sock is inserted into a colored, Naltex™ Flex-Guard for ease-of-application and maximum durability. When placed into groundwater ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
Well Wizard Bladder Pumps: The Original, Low-Flow Sampling Standard. Well Wizard pumps for MicroPurge low-flow groundwater sampling systems come in an unsurpassed range of sizes, materials, and capabilities, including models for deep sampling wells, narrow or obstructed casings, and small-volume pumps for low-yield monitoring wells. Together with MicroPurge controllers, flow cells, and ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
The Sample Pro XD Portable Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps. Pneumatic design can be operated with compressed air or compressed gas cylinder for complete ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
The Snap Sampler dedicated passive sampling system is the easiest way to collect samples for VOCs, SVOCs, PFAS metals and more. The Snap Sampler system has several advantages over other passive and no-purge sampling devices. Unlike passive diffusion bags that are limited to sampling for a small set of volatile organic compounds (VOCs), the Snap Sampler system collects a whole water sample that ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
The MicroPurge basicsTM MP10 Controller revolutionizes low-flow sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow, driving a microprocessor to re-create expert techniques for low-flow adjustment. Then, optimized settings are identified for recall in the next round of sampling. The MP10 also offers an easy way to ...
Manufactured by:QED Environmental Systems based inDexter, MICHIGAN (USA)
The MP15 MicroPurge® basics™ Sample Pack combines advanced lowflow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use. The simplified flow and drawdown control features of basics control are housed in a molded case along with a lightweight CO2 cylinder, putting everything you need to operate a bladder pump into one easily ...