- Home
- Equipment
- sweden
- waste recycling
- industrial shredders
Show results for
Refine by
Applications
- High-end baling and waste compacting solutions for cardboard sector
- High-end baling and waste compacting solutions for hollow containers and plastic bottles sector
- High-end baling and waste compacting solutions for mixed paper sector
- High-end baling and waste compacting solutions for plastic film sector
- High-end baling and waste compacting solutions for newspaper sector
- High-end baling and waste compacting solutions for print and plastic waste sector
- High-end baling and waste compacting solutions for RDF, SRF and MSW sector
- High-end baling and waste compacting solutions for aluminium/tin cans sector
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use - Construction and Demolition Waste
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Commercial and Industrial Waste, Plastics
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Side streams: Mattresses
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Cables & Wires
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Side Streams: Ragger Wire
- Industrial Waste Shredders for Waste to energy
- TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Life Tyres, Waste Tyres
- Waste to energy solutions for tire recycling industries
- Shredding machines for various applications
- Crushers, Hook Shredders, Screening and Equipment for Metal Separation
- Workplace Noise Monitoring
- Waste shredding for municipal waste plants
- Paper shredding for the paper recycling industry
- Plastic shredding for the plastic recycling industry
- Recycling plants design for the cable scrap recycling industry
Waste Recycling Equipment Supplied In Sweden
160 equipment items found
Manufactured by:Cellwood Machinery AB based inNässjö, SWEDEN
The CDS is the only non-pressurized system. This principle allows for a more compact design: a conveyor can be used to replace both the plug screw and the shredder, and there is no need for pressure vessels or sealings for HC discharge. The non-pressurized concept gives a low steam consumption, and the design also allows for existing dewatering equipment to be used. Retention time is 20-30 ...
Manufactured by:BMH Technology Oy based inRauma, FINLAND
The biggest waste shredder in the world. Shreds any combustible material. Produces uniform 80 mm particle size in
one single phase. Protected by MIPS. Hydraulic drive. Low operating and maintenance cost. Superb capacity and ...
Manufactured by:BMH Technology Oy based inRauma, FINLAND
The slow-speed TYRANNOSAURUS Biocrusher is our latest development for reducing untreated material in crushing stations. Since the first generation introduced in 1984 under the brand name of ECO-Crusher, it has proved to be economical and efficient in reducing combustible raw materials like: wood-based waste, logging residues & stumps, stalky plant and vegetable-based residues, packaging ...
Manufactured by:BMH Technology Oy based inRauma, FINLAND
TYRANNOSAURUS Biocrusher (oversize crusher) has been developed by BMH for reducing the oversize fractions after screening to maximize the use of combustible raw materials as fuel. Combined with a TYRANNOSAURUS Bioscreen it forms a dusttight,entirely enclosed ...
Manufactured by:TerraSource Global based inSt. Louis, MISSOURI (USA)
The Jeffrey Rader Mark III Elbow for pneumatic conveyor applications reduces wear, lowers energy consumption and helps eliminate fiber damage. The Mark III flat back elbow is specially designed to reduce energy consumption, reduce wear and help eliminate fiber damage. Material moves smoothly through the elbow without bouncing. First at the impact area, then guided as it changes direction and ...
Manufactured by:TerraSource Global based inSt. Louis, MISSOURI (USA)
Cage-Paktor Cage Mills feature an impactor design that needs no screens. They're designed to crush only the over-size material. The multiple stages of crushing inside the Cage-Paktor minimize product oversize, achieving greater crushing efficiency and producing more product in the size range ...
Manufactured by:Fredrik Mogensen AB based inHjo, SWEDEN
Mogensen-G is a patented compact machine with high screening efficiency within a wide range of very different and often demanding branches. The system offers high flexibility concerning the shape of inlet and outlets. Servicing is simple: large, easy-to-open inspection ports with secure fastening and dust covers available in 0.5 m wide modules with only 2 quick-release fasteners each. The system ...
Manufactured by:Saxwerk AB based inVästerhaninge, SWEDEN
Custom design. Material customized. Long experience of different materials. Efficient, simple and robust design. Low power consumption, Low maintenance ...
Manufactured by:Presona AB based inTomelilla, SWEDEN
The DH and XH balers are all equipped with Presona’s unique two-step pre-press system. This system allows a feed opening of 2200 mm – all the way from the feed opening down to the bottom of the press chamber. The powerful XH balers with a combined press force of 210 tons, channel format 1100 x 1100 and a power pack of 2 x 75 kW can produce up to 50 tph or over 800 cbmh. These balers ...
Manufactured by:Hydria Water AB based inBorås, SWEDEN
Sludge Receiver EX is a complete system for separation of debrie & rubbish from sludge & water. Sludge trucks can connect directly to the ...
Manufactured by:TerraSource Global based inSt. Louis, MISSOURI (USA)
The efficiency and safety of the EZ Access technology is now available for new wood hogs and as a retrofit to existing Jeffrey Rader machines. The Model WBE wood hogs have been redesigned with Jeffrey Rader's exclusive EZ Access technology, which allows safe, fast, and easy access to the hammers, rotor, and liners. Now maintenance operators can safely and quickly clear plugged chutes to minimize ...
Manufactured by:Presona AB based inTomelilla, SWEDEN
The baler: Robust design with highest possible reliability. User and service friendly. Optimized bale size and big feed opening. Unique pressure control of friction channel by means of two heavy duty pulling cylinders. All exposed zones in high-tensile steel. Press chamber floor in 20 mm high-tensile steel. Exchangeable high-tensile steel plates in press chamber and friction channel (option). ...
Manufactured by:BMH Technology Oy based inRauma, FINLAND
TYRANNOSAURUS Feeders are an excellent solution for optimizing feeding process to the shredder when continuous flow of material is needed. Feeder works as a buffer and a feeder for the process and lengthens the loading intervals. The feeding capacity of the Feeder is adjusted according to the level of measurement taken from the shredders hopper. TYRANNOSAURUS® Feeders are designed to have ...
Manufactured by:BMH Technology Oy based inRauma, FINLAND
TYRANNOSAURUS 8800 shredders are designed to handle Municipal Solid Waste with superior usability, easy maintenance and low running costs. Intelligent control system chooses an optimal shredding speed according to the waste type. Through large service hatches the knives are easily replaceable without any welding or grinding and the screen of the shredder is easily changeable for optimized ...
Manufactured by:Lyndex Recycling Systems Limited based inTelford, UNITED KINGDOM
Lyndex Recycling Systems Limited design and development team looked to develop a multi-purpose baler that could process all types of material without problems. The result was the development of the Meggabite. The Meggabite contains all of the developments from the Bimax shearing press with the addition of two pre-compression ...
Manufactured by:Lyndex Recycling Systems Limited based inTelford, UNITED KINGDOM
The Lyndex PZA confidential shredder is ideal for shredding entire files; all confidential papers; bundled, glues or lose without problems. In short: the PZA will shred confidential documents of all grades into any of three preselected particle sizes. By the manually operated valve control one can hydraulically adjust the desired shred size even while the machine is running. With this ...
Manufactured by:Lyndex Recycling Systems Limited based inTelford, UNITED KINGDOM
Lyndex PCZ paper shredders are designed not only to loosen up and tear open the input materials but also to shred them. All advantages are retained, i.e. low energy costs, minimum dust emission, and minimum destruction of fibre structure. The material is only shredded to the extent to achieve bales of stable shape and high density. As with the PC paper conditioner, the PCZ increases the infeed ...
Manufactured by:Redoma Recycling AB based inMalmö, SWEDEN
Motor for rotor: 22. Rotor length: 350. Rotor diameter: 350. Rotor knives: 5. Fixed knives: 2. Overall length: 1280. Overall width: 840. Overall height: *960. Weight, approx.: 1630. Max. capacity ("): 300. Max. capacity (***): 450. Installed in Redoma plants: ...
Manufactured by:Redoma Recycling AB based inMalmö, SWEDEN
Motor for rotor: 37. Rotor length: 500. Rotor diameter: 350. Rotor knives: 5. Fixed knives: 2. Overall length: 1370. Overall width: 1080. Overall height: 2100. Weight, approx.: 2250. Max. capacity (**): 550. Max. capacity (***): 800. Installed in Redoma plants: ...
Manufactured by:Redoma Recycling AB based inMalmö, SWEDEN
Motor for rotor: 45. Rotor length: 660. Rotor diameter: 400. Rotor knives: 2x5. Fixed knives: 2. Overall length: 1400. Overall width: 1400. Overall height: 2850. Weight, approx.: 2550. Max. capacity (**): 700. Max. capacity (***): 1000. Installed in Redoma plants: Powerkat ...