- Home
- Equipment
- canada nova scotia
- waste recycling
- waste and recycling vehicles
Show results for
Refine by
Waste Recycling Equipment Supplied In Nova Scotia
6 equipment items found
Distributed by:Joe Johnson Equipment (JJE) based inConcord, ONTARIO (CANADA)
The Labrie Automizer Versa-Hand Side Loader is a straight-frame side loading vehicle manufactured to the highest standards. It is designed to fully automate the collection of residential and commercial refuse and recycling materials in narrow streets and alleys. The Labrie Automizer Versa-Hand is a straight-frame side loading vehicle manufactured to the highest standards It is designed to fully ...
Manufactured by:Gardner Denver based inQuincy, ILLINOIS (USA)
Vacuum Blowers. Vacuum up to 100 mbar (a) - Capacity up to 10,500 m³/h. The RB-DV series consists of 3 lobe rotary blower used as exhauster, without overheating thanks to a Robuschi patented atmospheric air injection device. It can reach vacuum levels of up to 93% on a dead head - 28" Hg without the need to water inject or heat ...
Manufactured by:Gardner Denver based inQuincy, ILLINOIS (USA)
The WITTIG RFL 102 is a lightweight, air cooled waste vacuum pump designed for the collection and discharge of waste liquids from your vacuum and combined jetting/vacuum tankers. Highly efficient, the RFL 102 provides maximum flow rates at superior vacuum levels to shorten your loading times and reduce costs. The newly designed RFL 102 offers the same advantages as its classic predecessor but its ...
Manufactured by:P. Henkel GmbH based inKreuztal, GERMANY
The MGBround waste container by P. HENKEL GmbH introduces an innovative spherical base design, offering optimal emptying and ease of handling. These containers are constructed with hygiene, stability, and cost efficiency in mind, making them suitable for food, domestic, and organic waste disposal. Their corner-free, edge-free design enhances cleanliness, while their robust construction ensures ...
Manufactured by:Big Dipper - Thermaco Inc. based inAsheboro, NORTH CAROLINA (USA)
Thermaco Trapzilla TZ-400 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 75 gallons per minute peak flow, 400+ pounds of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for vacuum access for removal of solids, and including as ...
Manufactured by:Big Dipper - Thermaco Inc. based inAsheboro, NORTH CAROLINA (USA)
Thermaco Trapzilla TZ-160 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 35 gallons (2.21 l/s) per minute peak flow, 160+ pounds (72.57+ kg) of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for vacuum access for removal of ...