Refine by
Applications
- Environmental monitoring solutions for the site remediation industry
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
- Portable and fixed gas analysers for remediation and groundwater
- Environmental monitoring solutions for the oil refineries & petrochemical industry
Water Wastewater Equipment Supplied In Puerto Rico
9 equipment items found
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
The Eliminator is a high capacity bladder pump designed for LNAPL and DNAPL removal in 2” (50 mm) and 4” (100 mm) wells. The Eliminator is also used to handle viscous contaminants, such as crude oil. The Eliminator uses a bladder of PTFE or elastomer to isolate the pump air supply from the pumped liquid. As a result, there is no contact between the drive air and the contaminated ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Genie skimmers are safe, reliable and complete systems for removing floating LNAPL layers from wells. The SPG and SOS Programmable Genie skimmers are air-operated selective LNAPL removal systems with a high suction pump and a floating inlet designed to follow the LNAPL layer as the ground water level fluctuates. The SPG version uses a specific gravity float and the SOS version uses a hydrophobic ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Passive and active Skimmers used for all types of free-phase hydrocarbon removal in a wide range of ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
The AutoSkimmer Pump System automatically recovers LNAPL layers and pumps on demand when the pump is filled. Combining the industry-leading AutoPump with the rugged SPG floating inlet, the AutoSkimmer delivers higher LNAPL flows for wells with very high floating layer recovery rates. The system can then be switched to even higher flow, total fluids pumping by removing the floating inlet. When ...
Manufactured by:ClearStream Environmental Inc. based inSandy, UTAH (USA)
Dissolved Air Flotation Units are used in water and wastewater applications to take solids from other liquid solids separation processes and thicken the solids prior to further dewatering. The drive is mounted on the walkway or bridge. The rotating portion of the drive turns a structural torque tube or shaft, which in turn rotates the solids removal mechanism. The saturation system receives ...
Manufactured by:ClearStream Environmental Inc. based inSandy, UTAH (USA)
Just like its namesake, the spiral blades of the ClearStream Nautilus™ Spiral Blade Clarifiers are designed for function and strength and the precise sludge transportation rate required by the application and the clarifier sizing. Because of the high rate of sludge removal with spiral blades, there is practically no less risk of denitrification or secondary phosphorus release due to sludge ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
The FRP Rotating Scum Skimmer is designed for rectangular basins. Typical sizes range from 6 ft. to 20 ft. in length, and 6 inches to 18 inches in diameter. Most are manually operated with a lever arm. A handwheel or electric operator are available options. Normal maintenance consists of routine plant washdown. Typical applications include: grease and scum in primary basins; surface oil in ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Genie skimmers are safe, reliable and complete systems for removing floating LNAPL layers from wells. The SPG and SOS AutoGenie Genie skimmers are air-operated selective LNAPL removal systems with a high suction pump and a floating inlet designed to follow the LNAPL layer as the ground water level fluctuates. The SPG version uses a specific gravity float and the SOS version uses a hydrophobic ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
The QED family of Passive Skimmers has been designed for product only (LNAPL) recovery applications in sites where active pumping systems are not applicable due to existing conditions or extreme low permeable formations. The floating intake head follows the groundwater fluctuations in the recovery well, allowing only the free-floating phase (LNAPL) to be captured, without taking water, and stored ...