Air Blowers Articles

  • We purify our waste­ water optimally

    Holzkirchen wastewater treatment plant achieves a new milestone in energy efficiency with AERsmart The Holzkirchen wastewater treatment plant has a clearly stated objective: “We purify our wastewater optimally.” For the municipal wastewater treatment plant, located 40 kilometres south of Munich, there is a requirement to operate in a way that is as resource-efficient as ...

  • Case study - Increased capacity & stringent effluent limits met in a small footprint

    This Idaho Wastewater Treatment plant’s two existing single-ring oxidation ditches were facing increased flows and a new tougher phosphorus limit of less than 2.3 kg (5 lb) of total phosphorus per day. In addition to a tight budget, the small amount of land available also hampered the city’s options. The consultant’s evaluation confirmed fine-bubble aeration “would ...

  • Case study - Cheese manufacturer gets aeration upgrade

    Largest Cheese Manufacturer in the UK Gets Aeration Upgrade Dairy Crest Davidstow Creamery in Camelford is the largest cheddar cheese manufacturer in the UK. The process of collecting and processing milk is a 24/7 operation, generating effluent round the clock and needing to be treated and disposed of continuously. Effluent from the cheese-making process contains high fat content and ...

  • The Key To Controlling Airborne Contamination In Food Processing

    In the food and beverage industry, contamination is always a high priority concern. Small mistakes in handling, preparation, and even in the cleaning of the environment where food comes into contact with surfaces can cause disastrous results that can potentially affect hundreds of thousands of people. Often overlooked is the threat from another source of food contact: air. ...


    By Camfil Ltd

  • Case study - Aeration retrofit in Troy, Alabama

    Troy Alabama’s Wastewater Treatment Plant was faced with broken discs causing dropping dissolved oxygen (DO) levels in their oxidation ditch. Aeration Industries International was called to help improve DO. The plant rented a 40hp Aire-O2 Triton®.  As rotors continued to break,  an additional Triton was rented. After seeing the performance of the rental equipment, six ...

  • The Major Components of Heat Exchangers

    Heat exchangers are not only one of the most common pieces of equipment found on industrial sites, they are also one of the most important. Despite the name, heat exchangers are used for both heating and cooling and are actually used more often for cooling, especially on industrial sites such as refineries or processing plants. These pieces of equipment are not “one size fits all.” In ...


    By STI Group, Inc.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Deep Thoughts

    In viewing a presentation for a conventional jet aeration system or a Slot Injector™ aeration system, typically there will be a list of life cycle benefits which include energy savings, capital cost savings, and small plant footprint to name ...


    By KLa Systems, Inc.

  • A venturi device reduces membrane fouling in a submerged membrane bioreactor

    In this study, for the first time, a venturi device was integrated into a submerged membrane bioreactor (MBR) to improve membrane surface cleaning and bioreactor oxygenation. The performances of a blower and the venturi device were compared in terms of membrane fouling and bioreactor oxygenation. Upon comparing membrane fouling, the performances were similar for a low operation flux (18 ...


    By IWA Publishing

  • Case Study - TCE Source Area Remediation at a Former Manufacturing Facility Confidential Client – Western Connecticut

    Project Summary TRS Group, Inc. (TRS), as a subcontractor to AECOM, completed a Standard Fixed Price Remediation (SFPR) of trichloroethene (TCE) in groundwater in Western Connecticut using Electrical Resistance Heating (ERH). The objective of the ERH project was to achieve the prescribed remediation goal for dissolved TCE in groundwater within the treatment volume. The system ...


    By TRS Group, Inc.

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Automotive: Scrubber system removes HCL from Exhaust case study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • Chemical Industry: Ammonia Emergency Plan Calls on Packed Tower to Scrub Released Chemicals Case Study

    A few years ago Union Camp turned a corner. Management decided that advance planning would take the place of reacting after the fact to an emergency or regulatory agency demands. At Union Camp’s Dover, OH. facility, byproducts of the paper industry are converted into usable specialty chemicals for cosmetics, adhesives and other industries. Crystallization is a process used intensively with ...


    By CR Clean Air Group, LLC

  • Pulp & Paper: Ammonia Emergency Plan calls on Packed Tower Case Study

    A few years ago Union Camp turned a corner. Management decided that advance planning would take the place of reacting after the fact to an emergency or regulatory agency demands. At Union Camp’s Dover, OH. facility, byproducts of the paper industry are converted into usable specialty chemicals for cosmetics, adhesives and other industries. Crystallization is a process used intensively ...


    By CR Clean Air Group, LLC

  • Metals: Scrubber System Removes HCL from Exhaust Case Study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • AERZEN is helping a WWTP to reduce its energy usage

    Intelligent air supply for wastewater treatment plants The wastewater treatment plant at Rheda-Wiedenbrück is currently testing a brandnew control concept for AERZEN blower technology - the AERsmart control combination. Modernisation work at the wastewater plant began in 2013. The citizens of the Rheda-Wiedenbrück region, as well ...

  • Every kilowatt utilised optimally

    Heat recovery with AERZEN blowers As a part of an extensive renovation project, the city of Filderstadt modernised the Bombach wastewater treatment plant, located in the district of Bonlanden. Now, Delta Hybrid rotary lobe compressors made by AERZEN provide optimal oxygen supply, and, thanks to heat recovery measures, the energy balance has improved further. Although ...

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • Case study - Aeration ditch upgrade exceeds expectations

    Triton Process Aerators Meets Future Nitrogen Permit Regulations When the a Pennsylvania Sewer Authority was researching methods to improve the dissolved oxygen levels in its wastewater treatment plant’s oxidation ditches in 2001, they decided to totally replace its aging brush rotor system. They replaced the rotors with the  ...

  • Case study - SBR keeps noise, energy & capital costs low

    Pennsylvania is home to one of the first Argos® SBR plants to utilize a surface mounted process aerator/mixer, which is a significant improvement over the traditional diffused air network designs. The new layout offers substantial capital investment savings as well as significant reductions in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you