Applications
-
Premium
Emission control solutions for general dedusting sector
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Workplace noise
Verification of compliance with the maximum permissible exposure levels through measurements or calculations. Designation of noise zones and noise optimisation of ...
By SoundPLAN GmbH based in Backnang, GERMANY.
-
Premium
Data Management Software for Police
Putting an effective criminal justice data management system into place is crucial for the secure and effective input, retrieval, and sharing of sensitive information for police organisations; Vantage are expertly placed to deliver police data management software with our expertly developed and fully customisable software modules. Our Software helps law enforcement agencies remain compliant with data standards and regulations, while increasing data input and retrieval efficiency with extensive access permissions ...
By Vantage Software based in Rother Valley Way, UNITED KINGDOM.
-
Premium
Cleanroom Solutions from Concept Smoke Systems
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Gas monitoring instruments and systems for anesthetic gases
The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
-
Premium
Air sampling & monitoring systems for fire & police service
Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Gas monitoring instruments and systems for fumigation
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for compressed breathing air
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
-
Premium
Ozone generators for health application
Ozone therapy was found to be efficient, easy to use, ensuring good tolerance and no sideeffects. According to the chosen therapeutic concentration ozone can produce its immune-modulating, anti-inflammatory, bactericidal, virucidal, fungicidal, analgesic and other ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Odour nuisance assessment for industrial facilities
Assessment of odour impacts from industrial facilities is increasingly required for planning and IPPC/EPR permitting. CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies. In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to ...
By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.
-
Premium
Industrial hygiene - personnel safety gas analyzers for industrial air monitoring
Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Autonomous UV-C Disinfection Robot for Industry
Infection and outbreak control are significant and increasing problems globally. It can cause sick leaves and furthermore, infections and outbreaks generate a massive financial ...
By UVD Robots based in Odense, DENMARK.
-
Radiation monitoring instruments for the public health & safety industry
Public health & ...
By Technical Associates based in Canoga Park, CALIFORNIA (USA).
-
Tunnel Structural Health Monitoring Systems
Structural Health Monitoring allows rapid assessment of a tunnel’s state of health and such approach is becoming recognized as an appropriate mean to increase the safety and optimize operational and maintenance activities of tunnels. Data resulting from the monitoring program is used to improve the operation, the maintenance, the repair and the replacement of the structure based on objective results. Detection of ongoing damages can be used to discriminate deviations from design performance. Malfunctioning ...
By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).
-
Industrial Facilities
The dust generated at various times during the production and processing of materials in factories is often unpleasant and pollutes the environment. Such situations arise, for example, in steel production, when disposing of slag, in cement production or in the lumber industry. EmiControls products have the versatility and flexibility to be adapted to a wide and diverse range of situations, enabling measures to be taken that combat these sources of dust effectively and drastically reduce their levels inside and ...
By EmiControls based in Bolzano, ITALY.
-
Gas chromatography solutions for public health & environmental management sector
Having direct analysis of air quality is mandatory. Our products can be put next to hazardous area for online monitoring and direct ...
By APIX Analytics based in Grenoble, FRANCE.
-
waste water treatment using flotation, fat removal, sludge dewatering
We have expierence in poultry indsutry waste water treatment, sludge dewatering, fat prevention in pipes. ...
By Ekotakas UAB based in Kaunas, LITHUANIA.
-
Environmental, health and safety solutions for lead safety industry
This booklet provides construction workers with guidance regarding The Lead Exposure Lead Safety Coverin Construction standard (29 CFR 1926.62) issued by the Occupational Safety and Health Administration (OSHA). The standard requires that employers in the construction industry protect workers from excess exposure to lead. This easy to follow booklet contains general information, detailed training guidelines, complete regulatory citations, a self test and helpful safety tips for construction workers that may ...
By Comprehensive Safety Compliance, Inc. (CSC) based in Pittsburgh, PENNSYLVANIA (USA).
-
Infrared sources for industrial and safety sector
Axetris infrared sources are used in a variety of industrial applications: Combustible and Toxic Gas Detection, Refrigerant Monitoring, SF6 Monitoring, Fruit Ripening Monitoring, Flame Detection, Liquid Analysis using Attenuated Total Reflection ATR, Semiconductor ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
Radiation and chemical detection instrumentation for public health and safety industry
Public health and safety fall under the purview of Homeland Security but those entrusted with public health and safety are at the local level: Fire, police, emergency response, local EPA. What does the local Environmental Protection Agency (EPA) do to safeguard air, soil, and water for local communities? Monitoring and detection of radionuclides in addition to other toxic pollutants is employed. US Nuclear Corp provides specialized equipment to these various departments to monitor and detect any type of ...
By US Nuclear Corporation based in Canoga Park, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you