AGO Hydroair GmbH products

For all ranges of the industry the continuous monitoring of oil in effluent during the direct or indirect discharge is a very important aspect. An operational disturbance is to be recognized therefore fast, and the emission source can meet appropriate measures, in order to limit the damage. The measuring procedure is based on the dispersion of light with different wavelengths and under evaluation of several angles, by the oil and solid particles existing in the sample water. The determined measured values have a good comparability to in-house the specimens drawn by the responsible authorities as well as laboratories. It concerns thus an oil measuring instrument, which can differentiate surely between oil and in the waste water contained cloudy materials.

Protection for marinas, jettys, navigation channels, flood gates and other hydraulic engineerings against ice damage. Our ice prevention plants are optimised for a safe protection of hydraulic engineerings from ice damage. For example one can protect the jettys of harbours with bubble curtains around the construction against ice damage. The installation and the operation of such ice prevention systems is generally by far more inexpensive, than the construction of winterproof hydraulic buildings.

The oil skimmer type 1000 is a swimming compact unit for the removal of light liquids from the surface of waters. Liquids like gasoline, fuel oil, engine oils to powder oil binders in free or saturated form can be removed. A stable swimming characteristic is ensured by the 4 radially arranged flotation chambers. The skimmer is adjustable in hights and centrically installed on the basic frame. The oil skimmer type 1000 can be operated by each pump system such as gyroscopes -, pistons -, diaphragm -, hose -, vacuum pumps. The pump system should be co-ordinated however with the medium.

For the separation and recycling of light liquids, in particular of gasolines, mineral oil components as well as of oils and fats of vegetable and animal origin. Oils and other light liquids represent an enormous hazard potential for waters. Light liquids in the sense of the DIN 1999 are liquids of smaller density than water, which are not or only a little soluble in water and are unsaponify, like gasolines, diesel and fuel oils, filter oils, as well as other oils of mineral origin. No light liquids in the sense for this standard are emulsions, as well as fats and oils of vegetable or animal origin. On the other hand however light liquids offer the advantage due to their specific physical characteristics that they can be separated contrary to other materials with mechanical separation systems from the water.

Our lakes and water routes have been victims of the contamination with nutrients from antrophogen sources for a long time. Also drinking water lakes and reservoires can become eutrophicated by the input of phosphorus and nitrogen from point or diffuse sources. In addition air-transferred contaminations have also to be considered. All these affected waters require assistance for their stabilisation. Without oxygen the aquatic systems can`t survive. In a healthy water a dynamic equilibrium between the oxygenation by the atmosphere and by photosynthesis and the oxygen consumtion by the process of mineralizing of organic material is established. In a dirty water the dynamic equilibrium is shifted in such a way that an overproduction of organic material is dominating. Hence it follows that more oxygen is necessary for the decay of the sedimenting organic material than it can be supplied to the deep layers of the water.

Bluewind electric compressors have been designed to satisfy with the most varied needs of the market in the small power section. The range comes in two versions: direct driven and belt transmission, with three tank sizes (24 - 50 - 100 litres) and two powers (1,1 - 1,5 kW). They are reliable and guarantee maximum efficiency in every application, whether for the most demanding hobby use or for small handcrafts. Tank mounted coaxial electric compressor.

The Busch Seco vacuum pumps are dry running (oil-free) compact vane vacuum pumps which require no routine maintenance due to sealed-for-life ball bearings and self-lubricating, dry carbon composite vanes. The vanes are self-adjusting for constant high operating efficiency and a longer service life than other designs available today. The Seco pumps have a vacuum range from 0 to 27” Hg, and are ideal for such applications as material handling, sampling, hold-down, testing, packaging, molding, medical, laboratory, and the printing industry.