20 products found

Products

  • Ambient Monitor Gas Calibrators with Ozone Generators

    Environics Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.

  • Environics - Model Series 6100 - Computerized Multi-Gas Calibration System

    Environics - Model Series 6100 - Computerized Multi-Gas Calibration System

    The Environics Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic multi-point gas calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6100 meets all U.S. Environmental Protection Agency requirements. The Series 6100 consists of a single...

  • Environics - Model Series 6103 - Ozone Transfer Standard / Multi-Gas Calibrator

    Environics - Model Series 6103 - Ozone Transfer Standard / Multi-Gas Calibrator

    The Environics Series 6103 Ozone Transfer Standard / Multi-Gas Calibrator is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. The Series 6103 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6103 meets or exceeds all U.S. Environmental Protection Agency requirements. The Series 6103 consists of a single...

  • Environics - Model Series 9100 - Ambient Monitoring Calibration System

    Environics - Model Series 9100 - Ambient Monitoring Calibration System

    The Environics Series 9100 Computerized Ambient Monitoring Calibration System is an advanced microprocessor controlled instrument for dynamic calibration of ambient air analyzers.The Environics 9100 is the unit of choice in the Air Quality Monitoring Programs of the EPA and California Air Resource Board (CARB). The Series 9100 can house up to three (3) MFCs, giving the user a larger range of possible dilutions and a lower concentration of the gas or...

  • Model Series 7000 - Zero Air Generator

    The Environics® Series 7000 Zero Air Generators are easy to install, require minimal upkeep and are safer, easier and less costly than high pressure gas cylinders. The Zero Air Generators are capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air, with

  • Environics - Model Series 7000 - Stand Alone Zero Air Generator

    Environics - Model Series 7000 - Stand Alone Zero Air Generator

    The Environics Series 7000 Zero Air Generator is a pure air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air.  The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply.   The air is a perfect method for generating zero reference calibration gas, ultra-pure combustion air for flame...

  • Environics - Model Series 7000 - High Purity Zero Air Generator

    Environics - Model Series 7000 - High Purity Zero Air Generator

    The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas cylinders. Installation is as simple as connecting to a standard...

  • Gas Mixers and Gas Blenders

    Environics Gas Mixers and Gas Blenders automatically blends gases to generate precise gas calibration standards, create gaseous atmospheres or produce gas mixes for analytical research or production purposes. Each component concentration may be independently varied in response to user commands. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, the Series 2000 and Series 4000 can produce gas concentrations from percent levels to ppb for single or multi-point calibration.

  • Environics - Gas Chromatography Calibration System

    Environics - Gas Chromatography Calibration System

    Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use...

  • Environics - Model Series 4000 - Multi-Component Gas Mixing System

    Environics - Model Series 4000 - Multi-Component Gas Mixing System

    A low cost, multi-component gas mixing system with an advanced Windows user interface, the Series 4000 now has the expanded capability of mixing up to seven individual gases in a balance gas. The standard unit also comes with USB. The Environics® Series 4000 is a multi-component gas mixing system that now automatically mixes up to seven individual gases in a balance gas. The gas mixes can be used in generating precise gas calibration standards,...

  • Environics - Gas Mixers for Sensor Screening and Research Systems

    Environics - Gas Mixers for Sensor Screening and Research Systems

    Environics gas mixing and gas delivery systems are used extensively by sensor development companies as well as sensor manufacturers. Our systems are ideal for production screening (sorting) of sensors as well as research and development. The Environics systems are an efficient and versatile piece of laboratory equipment. Each system is a custom built, computerized, mass flow controller based systems which allow you to automatically blends and dilutes...

  • Gas Dilution System and Gas Divider

    Environics Gas Dilutors and Gas Dividers automatically generate precise gas standards for rapid multi-point calibration of analyzers. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, each system's mass flow controllers are factory calibrated using a computer controlled primary flow standard traceable to the United States' National Institute of Standards and Technology (NIST). The calibration data consists of an eleven-point comparison of commanded versus actual flow with

  • Environics - Model Series 4040 - Computerized Gas Dilution System

    Environics - Model Series 4040 - Computerized Gas Dilution System

    A low cost, computerized gas dilution system with an advanced Windows user interface, the 4040 now supports up to eight mass flow controllers, allowing a broader range of dilutions (up to 10,000:1). The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous...

  • Environics - Model 4000 - Series 4040 Automotive Gas Divider

    Environics - Model 4000 - Series 4040 Automotive Gas Divider

    The Environics® Series 4040 Automotive Gas Divider is an advanced instrument for the dynamic calibration of automotive or mobile source emissions analyzers. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument, protecting your investment and giving you the needed flexibility should standards change.

  • Environics - Model 4000 - Series 4040 VOC Gas Dilution System

    Environics - Model 4000 - Series 4040 VOC Gas Dilution System

    The Environics® Series 4040 VOC Gas Dilution System is a microprocessor based gas dilution system designed for the preparation of calibration standards used for VOC (Volatile Organic Compounds) monitoring programs. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument.

  • Environics - Model 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

    Environics - Model 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

    The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the...

  • Gas Mixers and Gas Dilutors

    Environics Gas Blending and Gas Dilution systems offer the unique capability to blend and dilute gases in a single chassis system. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. With an accuracy of +/- 1% and repeatability of +/- .05% of setpoint, the Series 2040 and Series 4020 can provide

  • Environics - Model Series 4020 - Computerized Gas Mixing and Gas Dilution System

    Environics - Model Series 4020 - Computerized Gas Mixing and Gas Dilution System

    A low cost, computerized gas blending and gas dilution system with an advanced Windows user interface, the Series 4020 now has the expanded capability of mixing up to 7 gases in a balance gas or diluting up to 10:000:1. The Environics® Series 4020 is a computerized gas mixing/dilution system which offers the unique capability of mixing or diluting gases in a single chassis. The gas mixes can be used in generating precise gas calibration standards,...

  • Environics - Medical/Biological Gas Flow and Scientific Research Applications

    Environics - Medical/Biological Gas Flow and Scientific Research Applications

    Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate...

  • Environics - Explosive Gas Mixing/Dilution Applications

    Environics - Explosive Gas Mixing/Dilution Applications

    Some research and industrial applications call for the dilution of explosive gases at high concentrations. Most often, this is in order to calibrate gas detectors. To meet these unique needs, Environics designed a modified version of our Series 4040 gas dilution system which included a dual chassis design.

  • Others

  • Environics - Reduced Oxygen Breathing Device 2 (ROBD2)

    Environics - Reduced Oxygen Breathing Device 2 (ROBD2)

    The Environics Series 6202 Reduced Oxygen Breathing Device simulates altitude exposure and can be utilized for both research and training purposes. The U. S. Navy currently uses the ROBD 2 to train aircrew to recognize the signs and symptoms of hypoxia and to perform the appropriate emergency procedures and additionally, conducts hypoxia research.

  • Environics - Model Series 3000 - Biological Atmosphere Incubation Gas Mixers

    Environics - Model Series 3000 - Biological Atmosphere Incubation Gas Mixers

    This 'On Demand' gas delivery and blending system will provide cost savings and repeatability of your gaseous atmosphere. The Environics® Series 3000 gas delivery/blending system offers on-site gas blending of 100% pure bulk gases and is configured to provide a solution to using costly premixed cylinders of gas. Unlike premixed cylinders, the Environics 3000 provides a repeatable blend of gases, using precision thermal mass flow controllers. The...

  • Environics - Humidity and Canister Filling Options

    Environics - Humidity and Canister Filling Options

    The humidification option allows specific Relative Humidity (RH) levels to be added to the output gas of the system. RH levels between 0 - 99% can be achieved. The humidifier is factory calibrated for a specific RH level to an accuracy of 5% (assuming a constant flow rate and gas temperature), and is NIST traceable.

  • Environics - Model 5000 - Stand-Alone Permeation System

    Environics - Model 5000 - Stand-Alone Permeation System

    The Series 500 Stand Alone Permeation System is an exciting new product from Environics. The standard configuration is a passive system. The oven allows for single or multiple disposible permeation tubes. The system is extremely reliable, with accurate and stability of the temperature within 0.1oC. The temperature can be anywhere from room temperature to 50oC.