22 products found

ESCO International (EI) Products

ESCO - Ozone Generators

Compact design and easy operation, modular electronic, every dielectric element is built with its own fuse, hydraulic connections made with stainless steel, electrical control connections and PSU made on the skid, processing instrumentation, PLC with touch screen control panel.
ESCO - Model EC-OZ/SS & EC- ST/SS Series - Skid Mounted Ozone Generator Systems

The skid mounted ozone generator systems are specifically designed and manufactured to meet the disinfection and sanitization requirements for controlled water quality standards for various industries, such as: bottling and rinsing plants, food and beverage industries, pharmaceutical and chemical processes, ultra pure water in electronic and pharmaceutical sectors, swimming pools and hot water circuits, potable water circuits, process water loops.
ESCO - Ultraviolet Treatment (UV) Systems

ESCO International can provide a wide selection of low pressure and medium pressure UV Systems. Flow rates from 1 m3/h to 3000 m3/h as standard. Amalgam lamp UV series. Inline Medium Pressure UV systems. Inline medium pressure UV systems with standard manual wipers. UV monitoring & PLC control. Optional Automatic cleaning systems. Optional Chemical cleaning systems. Stainless Steel 304, 316L with special anti-corrosion coating. Custom-designed UV...
ESCO - UV Water Treatment & Filtration Skid Systems

We offer engineered combined filtration and UV system for water treatment UV & Filtration Skid: Filtration and UV sterilization treatment. Flow rates from 1 to 200 m3/h. Filtration grade 10 to 300 µm.
ESCO - Advanced Oxidation Systems

ESCO International has, through intensive research and site trials, developed a unique advanced oxidation process, the CATADOX. The CATADOX process combines treatment by ozone, UV, hydrogen peroxide and when required a proprietary solid state catalyst. The CATADOX performs excellently in challenging applications such as micro-pollutant oxidation, non-biodegradable COD removal, enhanced TOC reduction, VOCs abatement, toxicity reduction.
ESCO - Ozone Injection Device

Once produced, the ozone gas must be transferred into the water to be treated. Mixers, ensure that the ozone is thoroughly mixed with water. Higher ozone mass transfer, means that almost all of the generated ozone is available for treatment of the water in question.
Ozone Off-Gas Destructions
ESCO - Catalytic Ozone Destruction Unit

Catalytic ozone destruction proceeds optimally above a minimum temperature, therefore pre-heating of the ozone gas mixture is necessary.
ESCO - Thermal Destruction Unit

Thermal ozone destruction proceeds optimally above a minimum temperature. The design incorporates a gas heating device and a heat recovery system using a heat exchanger.
ESCO - Catalytic Vent Gas Destruct Units

Air contaminants that are harmful to human health and the environment are known as Hazardous Air Pollutants (HAP) or Toxic Air Contaminants. ESCO International has developed a range of novel Catalytic Vent gas Destruct Units” ULTRACLEAN” suitable for the destruction of a wide range of industrial toxic gases. Industrial applications include semiconductor, LCD , and petrochemicals. The treated HAP compounds are hydrides (AsH3, PH3),...
ESCO - Ozone Monitors

ESCO International can offer ozone analyzers including ozone monitoring in the gas phase, water phase and atmosphere. Gas phase ozone monitors are suitable for measurement of the ozone produced by the ozone generator as well as the ozone off-gas that leaves the ozone contact chamber. The liquid phase monitor is suitable for measuring the dissolved ozone in water. We also offer ambient ozone monitors as safety devices for the protection of personnel...
ESCO - Oxygen Generators

The Oxygen generator takes air and separates the oxygen from other gasses. The separation is accomplished with an inert ceramic material that does not require replacement (when maintained and used according to this instruction manual). The process is completely regenerative which makes it reliable and virtually maintenance free. The delivery pressure can be set from 0 to 4,0 bars (g) to meet the needs of your operation.
ESCO - Air Dryers

The Air dryer prepares the incoming air for use in the ozone generator (or the oxygen generator) and that ensures a high ozone concentration and a reliable operation of the ozone unit. ESCO International supplies a complete range of air dryers specifically designed and selected to operate with our ozone generators.
Nitrogen Generators

No need for truckloads of cryogenic N2 or high pressure bottles. ESCO International can supply N2 units that can produce N2 on site in the quantity you require by the “pressure swing adsorption method”. The N2 generators are designed for 24 hour continuous trouble free operation and are fully automatic. They are delivered complete with compressor, air conditioner and storage tanks ready for installation in a building. You only need to install the electrical power.
ESCO - Model N-Series - Nitrogen Generators

The Nitrogen N-series are available in 11 standard models with capacity in the range from 4.5 to 96 Nm3/h. ESCO International can supply customised sizes up to 500 Nm3/h.
Processes
ESCO - Advanced Oxidation Process (AOP) System

Advanced oxidation processes (AOPs) are defined as processes which involve in situ generation of highly potent chemical oxidants such as hydroxyl radicals in sufficient and optimum quantities to significantly enhance the oxidation and destruction of a wide range or organic pollutants in contaminated water and air.
ESCO - Model Catadox - Commercial Advanced Oxidation Processes for Water & Gas Treatment System

Advanced oxidation processes (AOPs), uniting ozone and properly designed ultraviolet systems, in conjunction with hydrogen peroxide , may offer a powerful water treatment solutions for the reduction of undesirable organic compounds, COD and TOC. AOP processes are successfully used to decompose many hazardous chemical compounds to acceptable levels, without producing additional hazardous by-products or sludge which require further handling. Advanced...
Others
ESCO - Model Domestic UV Series - Sterilizer Unit

UV Range for Disinfection, TOC and Ozone Reduction and Advanced oxidation.
ESCO - Model ECM-XT Series - Ozone Generators

The ECM-XT range is the latest midsize range of ozone generators. Five different types of systems are able to produce between 40 g/h and 1,300 g/h of ozone with very low power consumption and with ozone concentrations between 2 % wt and 14 % wt. The power consumption for ozone production from PSA and LOX is very competitive. Regarding ozone production from air we are the leading manufacturer of ozone systems with respect to power consumption.
ESCO - Model Dotcat Range - Catalytic Ozone Off-Gas Destruction Units

Catalytic destruction unit: Catalytic ozone destruction also proceeds optimally above a minimum temperature, therefore pre-heating of the ozone gas mixture is necessary.
ESCO - Model Catadox Pilot - Advanced Oxidation Pilot Plants for Wastewater & Gas Treatment

ESCO International has developed and tested a new advanced oxidation pilot plant, CATADOX. The process combines treatment by ozone, UV, hydrogen peroxide and proprietary catalyst to enable the industry to meet the evertightening environmental standards for wastewaters & gases. The CATADOX, performs excellently in challenging applications such as micropollutant oxidation, non-biodegradable COD removal, TOC reduction, VOCs abatement, toxicity...
ESCO - UV Systems for Swimming Pools & Spas

Our innovative solutions and technologies give ESCO International a commanding position when it comes to treating challenging and specific pollutants from Swimming Pool water, cost effectively achieving Disinfection, successful Breakdown of Combined Chlorine, Reduction of Tri-halomethanes (THMs) and Toxic carcinogens, by products that come from chlorination. ESCO International’s UV system range offers not only a peace of mind for pool operators...
ESCO - Model ECF-XT Series - Ozone Generators

The ECF-XT range is the latest range of large ozone generators. Twelve different types of systems are able to produce between 1 kg/h and 35 kg/h of ozone with very low power consumption and with ozone concentrations between 2 % wt and 14 % wt. The power consumption for ozone production from PSA and LOX is very competitive. Regarding ozone production from we are the leading manufacturer of ozone systems with respect to power consumption.
ESCO - Model EC-OZ/SS & EC-ST/SS Series - Ozone Generating Skid Package

The skid mounted ozone generator systems are specifically designed and manufactured to meet the disinfection and sanitizations requirements for controlled water quality standards for various industries, such as: Bottling and rinsing, food and beverage industries, pharmaceutical and chemical processes, ultra pure water in electronic and pharmaceutical sectors, hot water circuits and for swimming-pool, potable water circuits, process water loops.

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.

ESCO International (EI) Products

Ozone Off-Gas Destructions

Nitrogen Generators

Processes

Others