Smith & Loveless Inc.

65 products found

Products

  • Pumping Stations - Pumps & Components

    Smith & Loveless Pumps are the heart of Smith & Loveless Pump Stations. With its industry-superior components and construction, it was the first pump designed specifically for wastewater transfer.

  • PISTA TURBO™ - Grit Pump

    PISTA TURBO™ - Grit Pump

    Smith & Loveless’ rugged PISTA Turbo Grit Pump is the only pump in the industry exclusively designed for pumping grit separated from sewage. The PISTA Turbo Grit Pump is available in both top-mounted vacuum-primed and remote-mounted flooded-suction configurations. Equipped with a Ni-Hard volute and Ni-Hard recessed impeller mounted completely out of the flow path of the abrasive fluid, the PISTA Turbo Grit Pump also features a heavy-duty,...

  • S&L I-SERIES™ - Immersible Wastewater Pump

    S&L I-SERIES™ - Immersible Wastewater Pump

    Smith & Loveless I-Series Immersible Pumps deliver peace of mind for end-users and owners where immersible protection is required or recommended. Available for new and retrofit applications in lift stations and wastewater treatment plant operations, these heavy-duty pumps can be immersed for up to three weeks in flooding conditions.

  • SONIC START - Model Streamline™ - Priming System

    SONIC START - Model Streamline™ - Priming System

    The SONIC START STREAMLINE™ Prime Sensing System is the robust, yet simple pump priming process that delivers the benefits of above-ground, operator-safe S&L pumping systems. When wet well levels rise, the proven SONIC START STREAMLINE™ senses pump prime status, and if necessary, initiates a suction lift priming process that completes in 60 seconds under standard conditions, maintaining prime indefinitely. With no vapor filter, 50%...

  • S&L - Rotating Assemblies for Water Pumps

    S&L - Rotating Assemblies for Water Pumps

    Tired of maintenance costs and downtime due to limited seal life, bearing & shaft failure and frequent clogging? An economic way to give new life to your Allis-Chalmers, Aurora Pump Company or Fairbanks-Morse pumping system is to install high-performance, energy-efficient S&L rotating assemblies.

  • X-PELLER - Non-Clog Pump Impeller

    X-PELLER - Non-Clog Pump Impeller

    The X-PELLER was specifically designed for high volumes of trash pumping applications and low flow conditions in 4' and 6' vacuum primed and 4' and 6' flooded suction Smith & Loveless pumps.

  • S&L STAR ONE™ - Vacuum Prime Pump

    S&L STAR ONE™ - Vacuum Prime Pump

    Our vertical, close-coupled STAR ONE™ S&L Non-Clog Pump design meets the highest of standards that promote superior efficiency, durability and ease of maintenance, including the 10 States Standard for 3” (76 mm) solids. Its rugged design, featuring exclusive oversized, stainless steel pump shafts and bearings, will typically deliver service for more than 20 years with basic care. The STAR ONE™ construction streamlines access to...

  • S&L STAR ONE™ - Flooded Suction Pump

    S&L STAR ONE™ - Flooded Suction Pump

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent recirculation and a keyed and tapered shaft for positive lock and easy impeller removal. The result is...

  • S&L RAPIDJACK - Quick Clean Check Valve

    S&L RAPIDJACK - Quick Clean Check Valve

    Smith & Loveless has revolutionized wafer check valve maintenance with the new RAPIDJACK. Clearing wafer check valves of stringy materials and obstructions will now take 15 minutes or less with the new RAPIDJACK.

  • S&L DURO-LAST - Stainless Steel Baseplate

    S&L DURO-LAST - Stainless Steel Baseplate

    In the spirit of Smith & Loveless pump station innovation and long-lasting quality, we’ve introduced the DURO-LAST® 316/Lean Duplex Series 2100 Stainless Steel Baseplate. This exclusive option is available on all above grade and Recessed Wet Well Mounted Pump Stations. This latest feature comes backed with a 25-year warranty, offering you the highest level of protection available anywhere in the industry.

  • Classic Wet Well Mounted Pump Station

    Classic Wet Well Mounted Pump Station

    The Classic Wet Well Mounted Pump Station (WWMPS) delivers municipalities and industry a fully customized packaged lift station solution. It's compact, above-grade and arrives ready for installation after being factory-built and tested. An easy-lift fiberglass enclosure (fitted with S&L gas-shocks) provides instant access to all station equipment and protection from the elements. Inside, dependable S&L Pumps deliver superior pumping...

  • Smith & Loveless - Model R<sub>2</sub> - Wet Well Mounted Pump Station

    Smith & Loveless - Model R2 - Wet Well Mounted Pump Station

    Smith & Loveless delivers even more effective work space per total area in the new R2 Wet Well Mounted Pump Station (R2 WWMPS). R2 = Rectangular x Recessed, and it's this combination that equates to streamlined station arrangements and significantly more room inside than circular designs. Being recessed yet still with grade level access, the station maintains a low profile, earth insulation for colder climates and the ability to service deeper wet...

  • FORMULA X - Wet Well Mounted Pump Station

    FORMULA X - Wet Well Mounted Pump Station

    The FORMULA X Wet Well Mounted Pump Station embodies the Smith & Loveless design philosophy of pump station excellence. The combination of proven S&L pumps and advanced, factory-built technology demonstrates why the station sets industry standards. It's armed with an array of standard components and features, delivering superior convenience and automation throughout the station. Exclusive features include easy-roll, split enclosure, standard...

  • Smith & Loveless - Recessed Wet Well Mounted Pump Station

    Smith & Loveless - Recessed Wet Well Mounted Pump Station

    The Smith & Loveless Recessed Wet Well Mounted Pump Station combines the benefits of the Classic WWMPS with those of conventional buried stations. The station's recessed profile insulates the station equipment, ideal for colder climates. The equipment chamber houses the pumps and mechanical components in a regularly ventilated environment that is safe and comfortable for the operator. This design also allows for pumping from deeper gravity mains...

  • Pumping Systems - Underground Pump Stations

    An innovative approach to wastewater pumping spread across North America when Smith & Loveless Inc. pioneered the factory-built pump station more than 60 years ago. Today, after tens of thousands of successful installations, the progressive vision that inspired Alden Smith & Compere Loveless flourishes through a complete array of innovative buried pump stations. Delivering spacious yet streamlined station designs, these pre-engineered Smith & Loveless pump stations deliver

  • CAPSULAR - Underground Pump Station

    CAPSULAR - Underground Pump Station

    Handling large capacities, the CAPSULAR Underground Pump Station combines superior performance with custom design and economic efficiency to provide solutions for customers' large flow applications. When compared to built-in-place, concrete designs, 30% savings can be realized with the S&L factory-built approach. Engineering costs are lower because of the extensive engineering (including mechanical, electrical, structural, environmental) already...

  • DUO-DUCT - Pump Station

    DUO-DUCT - Pump Station

    The DUO-DUCT represents Smith & Loveless’ most innovative underground pump station design for smaller applications. It offers many outstanding benefits over conventional, packaged pump stations, because of its station design and durability. With increased work space because of the elimination of suction piping inside the station, and all the environmental equipment that makes the station suitable for continuous human occupancy, the DUO-DUCT...

  • Custom Series Underground Pump Station

    Custom Series Underground Pump Station

    The Smith & Loveless Custom Series is the original factory built underground pump station. This design established the quality features that you’ve come to expect from Smith & Loveless.

  • Pumping Systems - Water Booster Stations

    Smith & Loveless designs and manufactures custom-built packaged water booster stations. Completely assembled in a quality-controlled manufacturing environment, S&L Water Booster Stations arrive at the job site fully tested and ready for hookup.

  • S&L - Packaged Water Booster Station

    S&L - Packaged Water Booster Station

    Smith & Loveless designs and manufactures custom-built packaged water booster stations, Completely assembled in a quality-controlled manufacturing environment, S&L Water Booster Stations arrive at the job site fully tested and ready for hookup.

  • Pumping Systems - S&L Pumps

    Smith & Loveless Pumps comprises the heart of Smith & Loveless Pump Stations and PISTA® Grit Handling Systems. With its industry-superior components and construction, it became the first pump designed specifically for wastewater transfer. The design philosophy behind the S&L Pump engenders hassle-free maintenance, energy savings and long-lasting, reliable operation. This performance yields tremendous dollar savings for utilities and end-users striving to responsibly manage th

  • Smith & Loveless - Vacuum-Primed Non-Clog Pumps

    Smith & Loveless - Vacuum-Primed Non-Clog Pumps

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent recirculation and a keyed and tapered shaft for positive lock and easy impeller removal. The result is...

  • Smith & Loveless - Flooded-Suction Non-Clog Pumps (FS)

    Smith & Loveless - Flooded-Suction Non-Clog Pumps (FS)

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent recirculation and a keyed and tapered shaft for positive lock and easy impeller removal. The result is...

  • Pumping Systems – Controls

    Smith & Loveless offers a complete of pumping system control systems and packages for new pumps stations and retrofits on previously installed stations. Systems range from digital PLC station controllers with touch screen controls, to microprocessor pump controllers and standard relay logic. All control systems are programmed and tested in the factory and at start-up.

  • PumpLogix - Pump Controller

    PumpLogix - Pump Controller

    PumpLogix controllers by Smith and Loveless Inc. are easy-to-see and easy-to-set automatic pump control and alarm monitoring systems. The PumpLogix interface – for both P-Series and L-Series models – makes operation a simple process. All adjustments, including controller configuration, pump on/off settings and alarm setpoints are shown on the front of the controller.

  • PROTRONIX - Model II - Pump Station Control System

    PROTRONIX - Model II - Pump Station Control System

    The PROTRONIX II Control System delivers PLC control for the cutting edge Formula X Wet Well Mounted Pump Station (WWMPS) and semi-recessed Rectangular Recessed WWMPS systems as well as any S&L pump station. The evolution of PROTRONIX II controls provides end-users the latest in system control technology in a single interface design.

  • Wastewater Treatment Systems

    Smith & Loveless offers a complete range of aerobic, biological wastewater treatment systems to meet the varied needs of industry, commercial facilities, municipalities, and private development. Our broad system list ranges from innovative membrane bioreactors, patented sludge busting biological processes, and complete extended aeration plants. Our pre-engineered systems come in factory-built and field-erected configurations, handling capacities from 1,000 gallons per day to 5 million ga

  • TITAN MBR - Membrane Bio Reactor

    TITAN MBR - Membrane Bio Reactor

    Smith & Loveless Inc. proudly offers TITAN MBR, our latest pre-engineered wastewater treatment system for municipal, onsite and industrial applications. The innovative TITAN MBR combines the wastewater treatment engineering expertise of S&L with submerged membrane technology. The combination yields a dynamic membrane biological reactor (MBR): a system that provides end-users with high-quality treatment performance, minimal operational...

  • FAST - Fixed Activated Sludge Treatment System

    FAST - Fixed Activated Sludge Treatment System

    The patented FAST Process stands for 'Fixed Activated Sludge Treatment', a fixed-film, aerobic treatment system designed for tackling variable load and flow conditions. Proven in thousands of installations worldwide, FAST consists of tankage packed with completely submerged media. The FAST media creates a high surface area-to-volume ratio, which combined with internal settling zones, maintains constant bacterial growth during low-flow and peak usage....

  • TITAN MBR MEM-FRAME - Wastewater Treatment Systems

    TITAN MBR MEM-FRAME - Wastewater Treatment Systems

    Engineered and pre-assembled in S&L’s quality-controlled factory, the TITAN MBR MEM-FRAME is a wastewater treatment system that is designed for insertion into any concrete aeration basin. Containing robust, flat-plate TITAN MBR Membranes, the MEM-FRAME maintains high permeability and consistent flux. The frame is fixed to the tank and the membrane modules can be removed with no draining. Clean in place without plant interruption.

  • OXIGEST - Model R - Wastewater Treatment System

    OXIGEST - Model R - Wastewater Treatment System

    Proven in hundreds of installations, the Model R OXIGEST treatment system provides stable operation and flexible process options for sanitary and industrial/process wastewater applications. The OXIGEST design encompasses complete aeration, clarification and advanced treatment in concentric tankage while allowing these unit processes to be individually separated and controlled. Its concentric tankage maximizes space efficiency in its footprint, thereby...

  • BioFicient - Wastewater Treatment Systems

    BioFicient - Wastewater Treatment Systems

    The patented BioFicient Process presents an innovative approach for pre-engineered wastewater treatment systems: specifically, reducing biosolids wasting and handling requirements. This means no complex plant operation or RAS/WAS calculations and minimal reduced biosolids to handle, haul and dispose.

  • ADDIGEST - Aerobic Wastewater Treatment System

    ADDIGEST - Aerobic Wastewater Treatment System

    The ADDIGEST is an aerobic wastewater treatment system designed for both municipal and industrial applications. The trade name ADDIGEST is derived from 'add-on-digestion' and attests to the versatility of this system. It offers treatment from basic BOD and TSS removal to nutrient removal and advanced treatment. The ADDIGEST Treatment Plant is available in both a Factory-Built ADDIGEST system and a larger Field-Erected ADDIGEST system. Both treatment...

  • Wastewater - Aeration & Mixing

    Smith & Loveless aeration systems deliver reliable treatment performance while minimizing energy demands. Proprietary system designs range from patented integrated fine bubble diffusion & mixing technology, brush aerators, and durable vertical mechanical aeration. Applications range from aeration basins and ponds, municipal and commercial lagoons, digesters, and oxidation ditches.

  • BIOMIXER - Aeration & Mixing System

    BIOMIXER - Aeration & Mixing System

    BIOMIXER Aeration & Mixing System by S&L is a patented, award-winning system that integrates the efficiency of fine bubbles diffusion with tremendous mixing capability in a single pre-engineered apparatus.

  • Mechanical Aerators

    Mechanical Aerators

    Smith & Loveless' vertical arcuate impeller blade design is more efficient than the radial vane design. The Smith & Loveless mechanical aerator blade curvature yields high pumpage with minimal head, thus maximizing oxygen transfer and mixing. The Smith & Loveless mechanical aerator comes in Fixed and Floating configurations.

  • Loop Brush Aerator

    Loop Brush Aerator

    Smith & Loveless' horizontal LOOP Brush Aerators provide premium oxygen transfer and mixing over a wide range of flow conditions. We design LOOP Brush Aerators for the greatest efficiency and cost-effective service.

  • Wastewater - Grit Removal

    Smith & Loveless’ commitment to market leadership in grit removal kindles on-going research and development, which leads to continued system innovations. Since the introduction of the original vortex PISTA® Grit Chamber in the early 1970s, S&L has developed numerous patented and exclusive components to further enhance the capability for complete grit removal, handling, and dewatering. This innovation and experience make the unparalleled PISTA® the industry’s most

  • PISTA - Grit Chamber

    PISTA - Grit Chamber

    High removal efficiencies originate from the PISTA 360 Grit Chamber’s unparalleled hydraulic design, including its flat chamber floor, patented and engineered V-FORCE BAFFLE and low-energy axial-flow propeller. The combination creates a true vortex that effectively separates grit from organics and the waste stream. Forced vortex action distinguishes the PISTA Grit Chamber from all other so-called “vortex” grit chambers because it...

  • PISTA, TURBO - Grit Washer

    PISTA, TURBO - Grit Washer

    The PISTA TURBO Grit Washer uses Tri-Cleanse Technology to produce clean grit while minimizing the odor caused by putrescible organics and the costs associated with growing landfill restrictions. Smith & Loveless’ PISTA TURBO Grit Washer featuring Tri-Cleanse Technology boasts a sleek, compact design with a similar footprint to S&L’s screw conveyor.

  • PISTA, PRO-PAK - Grit Removal System

    PISTA, PRO-PAK - Grit Removal System

    Further enhancing the world’s best grit removal scheme in a environment-protected, factory-assembled package, Smith & Loveless introduces the PISTA PRO-PAK. The custom-engineered PISTA PRO-PAK features a factory-assembled PISTA drive assembly, vacuum priming system and controls mounted to a steel base and housed within a retractable fiberglass enclosure. The drive motor, pump and related components are factory pre-wired and mounted to the...

  • PISTA - Grit Screw Conveyor

    PISTA - Grit Screw Conveyor

    The second-stage PISTA Grit Screw Conveyor is designed to work in concert with the complete PISTA Grit Removal System, providing superb dewatering and high retention of fine grit without the burden of high maintenance. The lamella plate design aids in the retention of fine grit while reducing turbulence and overflow. Dewatered grit discharges into container for disposal while the flow and residual organics are returned to the inlet channel prior to...

  • PISTA, DURALYTE - Grit Concentrator

    PISTA, DURALYTE - Grit Concentrator

    The new Smith & Loveless PISTA DURALYTE Grit Concentrator combines uncompromising strength and acclaim for superior grit concentrator performance. Specially-designed for large flow applications, the PISTA DURALYTE effectively washes collected grit while delivering extended service life beyond standard concentrator designs.

  • PISTA, TURBO - Freeze Protection Pump

    PISTA, TURBO - Freeze Protection Pump

    The SONIC START STREAMLINE jacket provides freeze protection for the priming dome and solenoid valve, while the PISTA Pinch Valve jacket keeps the bladder in the pneumatic pinch valve flexible for more dependable winter-time operation. Both jackets are recommended for all outside PISTA grit removal system installations with Top-Mounted PISTA TURBO Grit Pumps. Using state-of-the-art insulation and heating methods, both jackets are able to withstand...

  • PISTA - Model 360 - V-Force Baffle Grit Chamber

    PISTA - Model 360 - V-Force Baffle Grit Chamber

    The PISTA 360 Grit Chamber is equipped with the patented V-FORCE BAFFLE, which is an integral flow control baffle for both the inlet and outlet of the main chamber. The V-FORCE BAFFLE is designed to direct the inlet flow into the chamber in a manner ensuring the proper vortex flow and to prevents short-circuiting, allowing for a full 360° rotation through the inlet and outlet, providing maximum travel for the most effective grit removal.

  • Pista, Works - Grit Removal System

    Pista, Works - Grit Removal System

    The PISTAWorks is Smith & Loveless’s most recent innovation further enhancing the world’s best headworks and grit removal scheme all in one package, providing many engineering and cost savings considerations.

  • PISTA - Grit Concentrator

    PISTA - Grit Concentrator

    The durable PISTA Grit Concentrator, featuring a large discharge orifice, effectively functions as a primary grit washing and dewatering device. The PISTA Grit Concentrator separates the pumped flow into basic components of water, organics, and grit. Working in concert with the PISTA TURBO Grit Washer and PISTA Grit Screw Conveyor, the PISTA Grit Concentrator leaves grit clean with a sandy texture. Ninety-five percent (95%) of the residual organics...

  • SONIC START, STREAMLINE, PISTA - Prime Sensing System

    SONIC START, STREAMLINE, PISTA - Prime Sensing System

    The SONIC START STREAMLINE is now available for the PISTA® and in two models: outdoor or indoor. The clean and simplified SONIC START STREAMLINE Prime Sensing System relocates the solenoid valve and frees 50% of the original fitting connection points for an improved priming system.

  • OBEX - Spiral Fine Screen

    OBEX - Spiral Fine Screen

    Smith & Loveless takes its prominence in water and wastewater products even further with the OBEX Spiral Fine Screen system, complete with PLC controls and a color HMI screen.  The OBEX Spiral Fine Screen system is a high-performance system which protects equipment and enhances plant operations by removing trash items and debris from treatment processes.

  • Wastewater Clarifiers

    Smith & Loveless offers a variety of clarifiers for all kinds of municipal and industrial applications. Our pre-engineered designs include center feed clarifiers, peripheral feed clarifiers, solids contact clarifiers, and rectangular scraper systems. Smith & Loveless offers both steel and concrete tank designs.

  • CLAR-I-VATOR - Clarifier

    CLAR-I-VATOR - Clarifier

    The Smith & Loveless CLAR-I-VATOR is a high rate, solids contact clarifier used for economical and efficient chemical precipitation in water and wastewater treatment applications. It combines flash-mixing, flocculation, clarification, sludge collection and sludge thickening in one unit operation and tank suitable for municipal and industrial applications, the CLAR-I-VATOR lends itself to both variable rate or stop-start operation.

  • Kraus-Fall Peripheral Feed Clarifier

    Kraus-Fall Peripheral Feed Clarifier

    Hydraulically efficient, the Kraus-Fall Peripheral Feed Clarifier design utilizes more of the clarifier volume than standard clarifier designs. Higher efficiency even at overflow rates in excess of 1,200 gpd/sq. ft. (48.9 m3/m2 day) make the Kraus-Fall Clarifier ideal for installations with wide variations in flow.

  • Wastewater – Filtration

    Factory-built filters from Smith & Loveless remove turbidity, color, suspended solids and other particles from wastewater. Filters come in a variety of sizes and configurations to fit exact requirements, including as stand alone systems and integral units for S&L pre-engineered treatment plants.

  • Duplex Gravity Filter (DGF)

    Duplex Gravity Filter (DGF)

    The Smith & Loveless Duplex Gravity Filter (DGF) removes suspended solids and particles, improving effluent quality. The standard system is available in sizes to fit any application, providing up to 200 square feet (18.6 square meters) of effective filtration area per unit. Dual media filtration increases filtration depth and limits the head loss problems associated with single-media designs.

  • Wastewater Separation

    Smith & Loveless offers a diverse array of water and wastewater treatment and pumping system solutions for the world's water problems on land and at sea. Additionally, we deliver unique technologies and consumables for mineral processing. Please browse our many solutions to learn more about our product offerings.

  • DELTA-G - Parallel Plate Separator

    DELTA-G - Parallel Plate Separator

    The Smith & Loveless DELTA-G Separation System is the largest capacity pre-engineered separator on the market today. Factory-built and inspected in a quality-controlled environment, it comes pre-assembled to job-site ready for start-up. Employing parallel plates, the DELTA-G provides dual phase particle removal; both rising and settling particles are removed simultaneously with equal efficiency. Depending upon the application, the DELTA-G can...

  • Dissolved Air Flotation

    Dissolved Air Flotation

    Dissolved air flotation (DAF) offers many uses in reducing organic and inorganic loadings on downstream wastewater treatment equipment. DAF is a very versatile product to include in a process, especially to remove suspended particles and insoluble BOD with a specific gravity of 1.2 or less (particle size of less than 5 microns in size). It can also be used when particle density is too close to that of the carrier liquid and as a result exhibits...

  • Water – Ion Exchange

    DI-SEP® Ion Exchange Systems by Smith & Loveless handle a variety of industrial water treatment needs, including softening, deionization, and dealkalizers. Systems are tailored to meet customer requirements.

  • S&L DI-SEP - Deionization Systems

    S&L DI-SEP - Deionization Systems

    Smith & Loveless’s DI-SEP® Deionization Systems come in Separate-Bed and Mixed-Bed configurations. Applications include ultra-pure water, mining and boiler feed water, plus many more. It is a chemical/mechanical process utilized to remove dissolved constituents to enhance a process, to improve equipment operation or for recovery of valuable materials.

  • S&L DI-SEP - Ion Exchange Systems

    S&L DI-SEP - Ion Exchange Systems

    Smith & Loveless’ DI-SEP Ion Exchange systems remove dissolved calcium (Ca) and magnesium (Mg), which are largely responsible for the scale formation tendencies in most waters. The DI-SEP Ion Exchange Systems are also used for the removal of nitrates, radon and silica.

  • Water – Treatment Plants

    Smith & Loveless package water treatment plants integrate particular process steps like aeration, coagulation, oxidation, flocculation and sedimentation to provide onsite treatment of groundwater or freshwater supplies. Most applications are geared for iron and manganese removal.

  • S&L AQUA-FER™ - Water Treatment System

    S&L AQUA-FER™ - Water Treatment System

    The AQUA-FER™ Water Treatment Plant from Smith & Loveless combines aeration, chemical oxidation, sedimentation and filtration processes in a compact, integrated package. It's designed to remove soluble ferrous iron or manganese typically found in groundwater or reservoir supplies.

  • S&L AQUA-4 - Water Treatment System

    S&L AQUA-4 - Water Treatment System

    The AQUA-4 System from Smith & Loveless combines the processes of chemical coagulation, mechanical axial flow-assisted flocculation, tube settling and dual-media filtration. The AQUA-4 removes iron and manganese from surface water with the addition of a chemical oxidant.

  • Water Filtration Systems

  • S&L FIBROTEX - Filtration Systems

    S&L FIBROTEX - Filtration Systems

    FIBROTEX technology employs an expandable-bed fibrous filter element with a PLC. This enables the fibrous filter both to efficiently backwash itself automatically when fully loaded with solids, and to achieve exceptionally fine levels of filtration.

  • FIBROTEX IronMan™ - Filtration System

    FIBROTEX IronMan™ - Filtration System

    The Smith & Loveless FIBROTEX IronMan filtration system removes fine iron and manganese for potable water derived from well water sources. FIBROTEX technology combines an expandable-bed fibrous filter element and an integrated oxidation system with a PLC. This enables the fibrous filter both to efficiently backwash itself automatically when fully loaded with solids, and to achieve exceptionally fine levels of filtration. Significantly better...

  • IMF Protector™ - Filtration System

    IMF Protector™ - Filtration System

    The IMF PROTECTOR System by Smith & Loveless provides a cost-effective ultrafiltration solution designed for small municipalities. The system features a low-foul membrane that provides an effective barrier to fine particles, including waterborne pathogens such as cryptosporidium and giardia achieving removal efficiencies of greater than 4 log.

  • S&L KALWAVE™ - Water Disinfection System

    S&L KALWAVE™ - Water Disinfection System

    KALWAVE™ is an advanced water disinfection system which uses a unique combination of Ultraviolet light and Ultrasound for the disinfection of water. Unlike conventional UV systems, KALWAVE™ successfully inactivates particle-associated micro organisms.

  • Water Sand Removal

    Applied successfully in thousands of water and sewage treatment schemes on all continents, the PISTA® Sand Removal Chamber serves as the efficient choice for sand removal at water treatment plant intakes.

  • PISTA - Sand Removal System

    PISTA - Sand Removal System

    Applied successfully in thousands of water and sewage treatment schemes on all continents, the PISTA Sand Removal Chamber serves as the efficient choice for sand removal at water treatment plant intakes. In many conventional arrangements, large sedimention basins require significant space and additional chemical usage to help maintain proper settling. The PISTA Sand Removal Chamber significantly lessens space...

  • Pump Station Upgrades

  • S&L - Wet Well Fall Protection Retrofit

    S&L - Wet Well Fall Protection Retrofit

    Smith & Loveless’ latest innovation in operator safety is Fall Protection for Wet Well Mounted Pump Stations.  It provides an additional layer of protection against accidental falls into the wet well.

  • EVERLAST™ Above Ground Pump Stations

    EVERLAST™ Pump Stations combine convenient standard packages with advanced S&L pumping technology options to simplify system selection and provide the right service for every user.  Select the base model below that best meets your needs to get started.

  • S&L CAPSULAR™ - Wet Well Mounted Pump Station

    S&L CAPSULAR™ - Wet Well Mounted Pump Station

    Smith & Loveless Inc.’s above-ground wastewater pumping stations pave the way for end-users to reap the benefits of robust construction, operator-safe maintenance and single-source solutions. The result is efficient pump station performance, long service life and realized savings—verified by decades of successful installations.

  • S&L EVERLAST™ - Model Series 1000 - Wet Well Mounted Pump Stations

    S&L EVERLAST™ - Model Series 1000 - Wet Well Mounted Pump Stations

    Smith & Loveless Inc.’s above-ground wastewater pumping stations pave the way for end-users to reap the benefits of robust construction, operator-safe maintenance and single-source solutions. The result is efficient pump station performance, long service life and realized savings—verified by decades of successful installations. S&L’s next generation EVERLAST™ Wet Well Mounted Pump Stations...

  • S&L EVERLAST™ - Model Series 2000 - Wet Well Mounted Pump Stations

    S&L EVERLAST™ - Model Series 2000 - Wet Well Mounted Pump Stations

    Smith & Loveless Inc.’s above-ground wastewater pumping stations pave the way for end-users to reap the benefits of robust construction, operator-safe maintenance and single-source solutions. The result is efficient pump station performance, long service life and realized savings—verified by decades of successful installations. S&L’s next generation EVERLAST™ Wet Well Mounted Pump Stations...

  • S&L EVERLAST™ - Model Series 3000 - Wet Well Mounted Pump Stations

    S&L EVERLAST™ - Model Series 3000 - Wet Well Mounted Pump Stations

    Smith & Loveless Inc.’s above-ground wastewater pumping stations pave the way for end-users to reap the benefits of robust construction, operator-safe maintenance and single-source solutions. The result is efficient pump station performance, long service life and realized savings—verified by decades of successful installations. S&L’s next generation EVERLAST™ Wet Well Mounted Pump Stations perfectly embody this...

  • S&L EVERLAST™ - Model Series 4000 - Wet Well Mounted Pump Stations

    S&L EVERLAST™ - Model Series 4000 - Wet Well Mounted Pump Stations

    Smith & Loveless Inc.’s above-ground wastewater pumping stations pave the way for end-users to reap the benefits of robust construction, operator-safe maintenance and single-source solutions. The result is efficient pump station performance, long service life and realized savings—verified by decades of successful installations. S&L’s next generation EVERLAST™ Wet Well Mounted Pump Stations...

  • Pumping Stations - Controls & Accessories

    Smith & Loveless offers advanced touchscreen PLC and standard relay logic control options for new pump stations and retrofit projects. All control systems are programmed and tested in the factory and at start-up.

  • S&L StationComm™ - Pump Station Monitoring & Maintenance

    S&L StationComm™ - Pump Station Monitoring & Maintenance

    Thanks to StationComm, pump station monitoring and maintenance just got more efficient - and wireless. The cellular-based automated alarm texting system engineered by Smith & Loveless provides 2-way communication between user and pump station. Pump station professionals can now text pump stations to remotely operate and maintain the control panel. In addition, supervisors receive simultaneous messages while StationComm wirelessly sends sequential...

  • S&L ShadeAide™ - HMI Protector

    S&L ShadeAide™ - HMI Protector

    Are the sun's harmful rays making it impossible to do your job?  Block them out with the SHADE AIDE by Smith & Loveless. Color touch screens and black & white screens can be hard to see when the sun is beating down on them.  Over time, the sun's harmful rays can damage your HMI screens. The Patent Pending SHADE AIDE by Smith & Loveless blocks these harmful rays, allowing you to view your HMI screen in any weather condition.

  • S&L QuickSmart™ - Pump Station Controls

    S&L QuickSmart™ - Pump Station Controls

    Delivering simplified operation yet powerful pump station control, QUICKSMART™ Station Controls provide unparalleled ability to monitor and adjust all of your pump station functions. The easy to use, intuitive layout makes control modifications, screen navigation and viewing of pump station status easier than ever, with screen function buttons and a status bar accesible from every screen. Added features take station...