Stormsaver Ltd. products

Stormsaver Tunnels are a new concept for the UK but one which we can guarantee you will see an increasing demand for.

Attenuation is a crucial part of any new build in order to provide an effective SUDS strategy. Our attenuation tank is used to collect all roof and surface water on site, within one vessel. It will be sized to the requirements set out by the consultant in order to attenuate all the rainwater on site and discharge this to the storm drain, or natural water course, at a rate which will not cause downstream flooding. Once stored inside the attenuation tank, water is released via the pumping chamber. Pumps can be sized to suit your requirements. Stormsaver offer a range of solutions, but our attenuation tank, combined with pumping chamber is the most standard solution for most sites. However we would always encourage our clients to consider an option that includes rainwater harvesting too; after all, if you are installing a tank to collect the rainwater, you may as well re-use it too!

Stormsaver would always recommend our combined Attenuation and Rainwater Harvesting Tank with pumping chamber as the best solution for SUDS management. If you are going to the time and expense of installing a large vessel to attenuation rainwater, you may as well opt for a solution which enables your client to re-use that rainwater and save money and the environment. As with all of Stormsaver`s products, our GRP tanks and pumps are of the highest quality and can be sized to suit your requirements. As we manufacture our own products we can provide you with the perfect solution to match your needs. Have a look at our data sheet below, which will tell you more about the product.

The Stormsaver Combined Rainwater Harvesting and Attenuation Tank is a single piece, GRP, Pre-fabricated system, that is delivered to site for simple and rapid installation. This solution allows for efficient rainwater harvesting to a range of appliances appliances, but also acts as flood management by attenuating excess water before allowing it to enter the stormdrain system or local water course at a controlled flow rate. Half the tank is used for storing rain water for use in the building, whilst remaining excess water is diverted to drain in times of heavy rainfall at a controlled flow rate. Both the tank and flow controls can be sized to suit your requirements.

Most common commercial rainwater harvesting arrangement. Suited to buildings with large-scale water needs. Rainwater flows from the main tank to the secondary header tank. Header tanks gravity-feed or use booster pumps. Smart controls automatically switch to mains when rainwater is low. Highly efficient arrangement due to mains water topping up the header tank. Uninterrupted supply during maintenance and component failure. Includes mains water protection through a fail-safe mechanical ball valve.

Our pressurised rainwater harvesting systems are recommended for certain buildings and applications only. For example, buildings with a small block of toilets, or for irrigation or vehicle washing facilities. For more information on our pressurised systems.

Our non pressurised rainwater harvesting systems are suitable for a wide range of applications and buildings. For more information on our non pressurised systems, please don’t hesitate to contact us.

The Monsoon Garden Rainwater Harvesting System is the perfect economical harvesting system. The system is suitable for any outdoor use, including plant water, sprinkler systems and car washing with a hose. Utilising a clever submersible pump, our system is reliable and robust and of course you will benefit from the expertise of the Stormsaver team who are on hand to help you with any questions that you may have.

The Monsoon Eco 10 Rainwater Harvesting System is the perfect economical harvesting system. Designed to save even more energy with low consumption, the Eco 10 is suitable for a wide array of homes and can be used for toilet flushing, washing machines and garden watering.

Commercial Rainwater Harvesting collects and recycles rainwater from the large roof area of non-household buildings to provide a fully sustainable water supply for non-potable use.   Commercial Rainwater Harvesting is a highly efficient water management method. Systems contribute towards reduced reliance on public supplies and lessened stormwater discharge rates. Stormsaver supplies fully intelligent rainwater harvesting solutions which are designed, manufactured, and tested here in the UK.